Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Screen resolution problem

25 Aug 2010   #31

Windows 7 ultimate 64 bit / XP Home sp3

I would make sure I had all the latest if any patches installed for the game and then give it a try.
@ Petey7 your right i was surprised to see that it worked at 100 Hz refresh that is why when you enter it into the Nvidia control panel it has the test option to see if it will run at that refreah rate. At 100Hz I would think it could possibly damage the LCD.

My System SpecsSystem Spec
25 Aug 2010   #32

Windows 7

It seems not only Just Cause 2.But also when i press 'Enable 3D vision'
@Petey7 is it stuck this way?
My System SpecsSystem Spec
25 Aug 2010   #33

Windows 7 Professional SP1 64-bit

No. Go back to where you were in the control panel and change the refresh rate to 60hz. Has Fabe said, this will most likely damage the LCD.
My System SpecsSystem Spec

25 Aug 2010   #34

Windows 7

I've set it to 60Hz,before it was also that.but the problem still persists.When it says out of range it still says /85Hz
My System SpecsSystem Spec

 Screen resolution problem

Thread Tools

Similar help and support threads
Thread Forum
Screen resolution problem
I just put Windows 7 on a Dell Inspiron 600m PC, and turned the resolution down all the way (800 x 600). This is what I get. How can I fix this? See the attached image file.
Graphic Cards
Screen resolution problem?
Okay so i've always ran my pc on 1920x1080 because it's the resolution of my monitor. Today i upgraded my graphic card from (5970 x2 to GTX 780ti), once i turned on my pc and install the latest driver for the gtx 780t it set the resolution to 1920x1080 which is the recommendation setting, only the...
Graphic Cards
Screen resolution problem
While I was playing a game, a message popped up and said I needed to change to 1680 X 1050. I did that, but was not able to see part of the screen. I went back to check the setting and it showed 800 X 680. This happened again, even after a reboot. I have an Acer x223 W. Any advice...
[PROBLEM] Screen resolution not right!
Hey all, I have recently been running my computer for really long periods and have only just turned it off last night. When I turned it on this morning it did a file corrupt scan which sometimes randomly happens. When windows fully loaded the screen resolution had been changed, almost to...
General Discussion
bit of a screen resolution problem
Hello all, I have a bit of a screen resolution problem. It just seems to be a bit sretched, and I only have two options to switch my resoltion to, neither of them helping. My graphis card is a ATI Xpress 1150 256MB HyperMemory (Integrated graphics). I'm not sure how to fix it, I've...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:24.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App