![]() |
|
25 Oct 2010 | #1 |
|
Problems since installing windows 7 ultimate
I have recently installed Windows 7 ultimate onto my 'HP pavilion tx1250ea' laptop - Ive got nearly everything working. But there is a couple of problems. Whenever i try to install anything on the laptop the screen goes completely black for about 2minutes and then back to Normal, the only thing i can think of is that it has something to do with the graphics driver - 'Nvidia geforce 6150' (windows update). I tried to install this manually from the nvidia site but once ive downloaded the driver for windows 7 32bit it says it is not compatible. What am I doing wrong?!
Also - (sorry) The Laptop has 2gb RAM, since ive installed windows 7 it now only shows as 1gb. would this also have something to do with my black screen problem.. Nightmare, but any help would be greatly appreciated. |
My System Specs![]() |
. |
|
25 Oct 2010 | #2 |
|
contecrux,
Welcome to Seven Forums. Reseat the memory boards. Sure hope you didn't sit the laptop in a puddle of water. Water can play havoc with laptops. After reseating the ram, if the laptop still only recognizes 1 GB, then WIN | type MDSCHED | ENTER Choose to reboot immediately. WIN is the key with the wavy flag. When the memory diagnostic program starts, you can use the F1 key to change how many tests are run. |
My System Specs![]() |
25 Oct 2010 | #3 |
|
|
My System Specs![]() |
. |
|
25 Oct 2010 | #4 |
|
Did you maybe answer the wrong post as his problem has zero to do with UAC.
|
My System Specs![]() |
25 Oct 2010 | #5 |
|
The Laptop is well looked after and has never been wet..
It is only since i installed windows 7 this has happened. As for reseating the memory boards, where would i start? Thanks for your jelp by the way.. Kudos |
My System Specs![]() |
25 Oct 2010 | #6 |
|
You will about a #3 Phillips screwdriver.
Now your guess is as good as mine. I don't have an HP but if the memory is on the bottom, then Turn the laptop upside down so that you are looking at the bottom. There should be a "cover plate" that you can remove to access the memory chips. When I think about it, if you've never done anything like this before then if you've got a techie friend ask him to make sure the ram chips are seated correctly. Or you can go to the HP site and download the manual for your laptop and see if the manual shows changing memory chips. If not, then google replace ram on HP pavilion tx1250ea. You just might run across a video showing how. If you get that far, then take the chips out, blow off any dust and dirt and reinsert the chips. You might feel more comfortable starting with the memory diagnostic program. There is a much more powerful memory test program but the Win 7 program, mdsched, should be sufficient. |
My System Specs![]() |
26 Oct 2010 | #7 |
|
If you decide to reseat the RAM, make sure that first you power off the laptop, and remove the battery. Also, after you have removed the battery, hold the power button down for about 15 seconds to remove any residual power.
|
My System Specs![]() |
26 Oct 2010 | #8 |
|
Thanks Guys!!
|
My System Specs![]() |
26 Oct 2010 | #9 |
|
Let us know the end result.
|
My System Specs![]() |
31 Oct 2010 | #10 |
|
Jesus dude, 2gb Ram with Windows 7?? You better go back to Vista, lol! What is better in Win7 that everyone wants to install it? I don't get it, since I'm on win7 I'm only complaining for all its bugs and lack of various options which has been removed from Vista... and there are a lot of drivers issues too!
|
My System Specs![]() |
![]() |
Thread Tools | |
Similar help and support threads | ||||
Thread | Forum | |||
Problems installing Windows 7 Ultimate x64 Hello guys i was installing windows 7 using my usb Flash drive i formated usb as UEFI Because my PC is UEFI Based PC And Followed the guide Which was on this forums how to install Widows 7 on UEFI BASED PCS but when i booted (setting Usb Flash Drive to primary Boot Device)but when it boots the... |
Installation & Setup | |||
Windows 7 ultimate not installing Hello, people. I have an hp pavillion a1130n with 1.5 GB of ram. I am trying to install windows 7 ultimate x64. I am positive my PC can handle this. Despite its lack of .5 GB of ram. I have tried to install windows 7 ultimate 5 times. Two of them sent me directly to my windows XP SP3. The first... |
Installation & Setup | |||
Problems Installing Windows 7 Ultimate x64 Hello, everyone. This is my first post as well as my first question on this forum. I bought an ASUS N56VZ a month ago, pre-installed with Windows 8 Single Language x64 which I do not like. I have been trying to install Windows 7 Ultimate x64 every since the first day I bought this notebook, I... |
Installation & Setup | |||
Help installing Windows 7 Ultimate Hello How are you I bought the system and Windows 7 Ultimate But I could not install it Possible give me the threads or the like for the installation process |
Installation & Setup | |||
installing windows 7 ultimate hi all :) just a general question on windows ultimate, can i install this edition on another drive while keeping my existing windows 7 home edition on the original drive? what i was going to do was disconnect my hard drive with the win 7 home on and just connect the drive i wish to have ultimate... |
Installation & Setup |
Our Sites |
Site Links |
About Us |
Find Us |
Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd All times are GMT -5. The time now is 11:50. |
![]() ![]() ![]() ![]() ![]() |