Graphics Cards Heat Sinc Installation

Show off!! Very good.

I have twin fans on the Scythe Mugen CPU cooler.

Hopalong X said:

Show off!! Very good.

I have twin fans on the Scythe Mugen CPU cooler.

Smart. I am only running a stock cpu cooler just now m8.

I want to get a nice and good cpu cooler which does not require installtion by me moving the mobo out. Any ideas m8.

It will need to be removed unless the hole behind the CPU is big enough to get the plate and screws in place- after removing side panel you normally never take off.
Looks like the same problem as mine.

Let me tell you what I'm going to do with mine. If and when the mobo has to come out or CPU cooler off to clean- probably be this- I'm going to remove all electronics
from the case.
Then get out my Rotary tool and enlarge the hole in the back of the inner case- mobo mounting panel- so I can reach all four CPU cooler screws. My HAF has a huge hole but is offset up so you can't reach bottom two screws with mobo mounted.
It will be a one time mod and done. See pic.
Picture is of your case.
http://www.hardwarecanucks.com/forum...eo-review.html