Intel® HD Graphics vs Samsung Syncmaster 2243nw: The Nightmare

The scenery:

Display Adapter: Intel® HD Graphics 15.17.12.2226
(8.15.10.2226) driver installed. (latest, dated October 2010)

Monitor: Samsung Syncmaster 2243nw

Operating System: Windows 7 Ultimate

--------

This last week has been a nightmare... All because
I installed Windows 7 Ultimate and can't get the combination
of the aforementioned resources to work.
Everytime I combine the latest (or even the one before that one)
Intel® HD Graphics driver and the Samsung 2243nw, the screen goes
blank and I have to enter in safe mode to uninstall the graphics
adapter reboot again to find a Standard VGA Graphics Adapter and a
Generic PnP Monitor and a subsequent very poor resolution.
I've tried all the recipes you folks published in some of your threads (Pagina de Afaceri included and even a driver made by Zer0r) to no avail.

Any ideas?

Thanks a bunch.
Alexis

Thank you very much for your reply.
This is the result:

Monitor
Model name............... SyncMaster
Windows description...... SyncMaster 2243NW/2243NWX
Manufacturer............. Samsung
Plug and Play ID......... SAM03C2
Serial number............ HMEQ100431
Manufacture date......... 2008, ISO week 3
-------------------------
EDID revision............ 1.3
Input signal type........ Analog 0.700,0.300 (1.0V p-p)
Sync input support....... Separate, Composite, Sync-on-green
Display type............. RGB color
Screen size.............. 440 x 300 mm (21.0 in)
Power management......... Active off/sleep
Extension blocs.......... None
-------------------------
DDC/CI................... n/a

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.646 - Ry 0.339
Green chromaticity....... Gx 0.290 - Gy 0.603
Blue chromaticity........ Bx 0.145 - By 0.070
White point (default).... Wx 0.313 - Wy 0.329
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 30-81kHz
Vertical scan range...... 56-75Hz
Video bandwidth.......... 140MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1680x1050p at 60Hz
Modeline............... "1680x1050" 119.000 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 67Hz - Apple Mac II
640 x 480p at 72Hz - VESA
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 72Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768p at 60Hz - VESA
1024 x 768p at 70Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 870p at 75Hz - Apple Mac II
1680 x 1050p at 60Hz - VESA STD
1280 x 1024p at 60Hz - VESA STD
1280 x 960p at 60Hz - VESA STD
1152 x 864p at 75Hz - VESA STD

Report information
Date generated........... 11/27/2010
Software revision........ 2.53.0.861
Data source.............. Registry-Active
Operating system......... 6.1.7600.2

Raw data
00,FF,FF,FF,FF,FF,FF,00,4C,2D,C2,03,32,32,59,4D,03,12,01,03,0E,2C,1E,78,2A,B5,01,A5,56,4A,9A,25,
12,50,54,BF,EF,80,B3,00,81,80,81,40,71,4F,01,01,01,01,01,01,01,01,7C,2E,90,A0,60,1A,1E,40,30,20,
36,00,CB,28,11,00,00,1A,00,00,00,FD,00,38,4B,1E,51,0E,00,0A,20,20,20,20,20,20,00,00,00,FC,00,53,
79,6E,63,4D,61,73,74,65,72,0A,20,20,00,00,00,FF,00,48,4D,45,51,31,30,30,34,33,31,0A,20,20,00,C7

Can you make anything out of this?

Thanks!
Alexis