Could my graphics card have died?

Page 1 of 2 12 LastLast

  1. Posts : 65
    Windows 7 Home Premium 64-bit (6.1, Build 7601)
       #1

    Could my graphics card have died?


    Seeing as no-one was replying to my thread in the Hardware section, I thought I'd repost it here:

    First of all, please read the first part here, otherwise you might miss something out with whether it can be fixed or not: monitor problems after installing new RAM


    To cut a long story short, I did got a BSOD later on - after I first put the new RAM in correctly (which is included in the previous post). I didn't think it was related at first, but now I get the feeling it might be.

    I've got two GeForce 8800GTS' via SLi. When I plug my monitor in the bottom card, it works (but it says it's not attached to an NVIDIA GPU, and there's no Aero etc. - although I can up the res to 1280x1024, so it's not like SafeMode in that respect), but when I plug it in to my top card - the one I've always used - the monitor doesn't come on.

    So does that mean my graphics card has died? It can't really be dislodged, as both cards are pretty much firmly fixed in place.
      My Computer


  2. Posts : 966
    Windows 7 Ultimate 64-bit
       #2

    I apologize that you haven't gotten any assistance yet. There are so many people that post questions and only a few of us that can actually answer them

    So, let's see what i can do for you. I am going to ask some questions about your previous thread, too, to keep it all together. Otherwise I will confuse the hell out of myself and will be of no use to you.

    I see you got a Code 43 on your graphics card. Does your Device Manager say you have a graphics card properly installed? It should look something like this (with your card's name, of course)



    When you get a Code 43, something in the card itself has gone wrong, and has to be ignored by Windows. In your case, it is most likely the card that isn't giving you a picture. Since it's in SLI, your drivers or Windows knows there's two that are supposed to work in tandem so everything is diverted to the second, functioning, card.

    There are a few things you can try in this case:

    1. Remove the physical address extension patch if it is still active on your machine. I'll have more to say about this later.
    2. Update your graphics drivers if possible by going to NVIDIA DRIVERS 260.99 WHQL
    3. Remove the card that doesn't seem to be working and run off of the one card for the time being. Do you still get Code 43 or no acknowledgement that your monitor is hooked up to an nVidia card?
    4. Isolate that card that seems to not be working. By itself, does it still not give you any image on your monitor?


    You are also getting a Code 28 saying your display driver is not installed.

    You do not have a video card driver installed, according to Windows. See #2 above.

    BSOD after new RAM is installed

    This can be caused by the fact that you extended the physical addresses. With a 32-bit operating system, there are only so many addresses available for a reason. Once you get past that threshold, it is no longer functioning like a 32-bit OS yet it is only designed or equipped to handle 32-bit addresses. I'm almost positive it's being caused by your PAE. Remove it (if you haven't already)

    In Summary

    Don't ever use a PAE :P . It can cause more problems than necessary and it would have been a lot less difficult in the long run to back up your stuff and re-install Windows as a 64-bit OS instead. What I don't get (Just my opinion, not directed at anybody in particular, ever) is why people still install 32-bit OSes on their machines to begin with. To me, it makes no sense given there are 64-bit drivers for 98% of all hardware people use nowadays. If hardware doesn't have 64-bit drivers, the manufactuer is probably not caring too much about that hardware piece to begin with. And given 64-bit OSes have been around since Windows XP (2001), 9 years is a long time to not get with the program, so to speak. (rant done)

    So there you have it. Give all that a whirl, and let us know what's up!
      My Computer


  3. Posts : 65
    Windows 7 Home Premium 64-bit (6.1, Build 7601)
    Thread Starter
       #3

    Thanks a lot for the reply :)

    First of all, how do I get rid of the PAE patch? I followed the instructions that came with it (see attachment), but a System Restore didn't get rid of it - it still has the option as the computer boots up whether to choose 'Windows 7' or 'Windows 7 (PAE patch)'.

    I'll try the next step after I find out how to get rid of this thing (unless I can't, or you want me to try installing the latest NVIDIA driver anyway?)
    Could my graphics card have died? Attached Files
      My Computer


  4. Posts : 966
    Windows 7 Ultimate 64-bit
       #4

    Gaz1701 said:
    Thanks a lot for the reply :)

    First of all, how do I get rid of the PAE patch? I followed the instructions that came with it (see attachment), but a System Restore didn't get rid of it - it still has the option as the computer boots up whether to choose 'Windows 7' or 'Windows 7 (PAE patch)'.

    I'll try the next step after I find out how to get rid of this thing (unless I can't, or you want me to try installing the latest NVIDIA driver anyway?)
    No, don't do it anyways. If PAE is the source of some of the issues, the new drivers may now show any effect as one of your cards may be forced out of the memory space because of the patch.

    You should probably remove the boot entry from the Windows 7 bootloader. BCDEdit is a tool built into Windows that will help you do that.

    We have a tutorial here on what BCDEdit does and how to edit your bootloader.

    BCDEDIT - How to Use

    This why you will only ALWAYS boot into normal Windows 7. After that, remove any files the patch created (if you can) and run "sfc /scannow" (WIN+R). Once that's finished, move to the drivers.
      My Computer


  5. Posts : 65
    Windows 7 Home Premium 64-bit (6.1, Build 7601)
    Thread Starter
       #5

    Well here's a screenshot of my BCDEdit/Windows Boot Manager (attached).

    The only ones I could find in that link where you delete something are these 2:
    bcdedit /deletevalue {4c21825f-e04b-11dd-b760-00195b61617a} numproc
    NOTE: This deletes the numproc parameter from entry {4c21825f....}

    bcdedit /delete {4c21825f-e04b-11dd-b760-00195b61617a}
    NOTE: This deletes the boot entry {4c21825f....} completely. In order to delete an {ntldr} entry, you must use the /f switch to force deletion: bcdedit /delete {ntldr} /f
    But since both resumeobject[s] are the same (in fact all of the {ntldr}(?) entries are the same), how will it know to delete just the PAE patch one? OR am I missing something here?


    Reading through the comments on that page I came across something I hadn't thought about:

    Couldn't I just use msconfig boot config to delete it?
    http://img17.imageshack.us/img17/2421/capturewgx.jpg
    Attached Thumbnails Attached Thumbnails Could my graphics card have died?-bcdedit.jpg  
      My Computer


  6. Posts : 966
    Windows 7 Ultimate 64-bit
       #6

    Yeah, you could. I totally forgot about that!
      My Computer


  7. Posts : 65
    Windows 7 Home Premium 64-bit (6.1, Build 7601)
    Thread Starter
       #7

    OK to update you so far:

    I removed the PAE patch via msconfig, and installed the NVIDIA driver - doing it as a "clean install". It all works like normal (including the driver) when I plug the monitor into the bottom graphics card, and I don't get the Code 43 any more.

    however, it doesn't acknowledge the existance of the second graphics card (my defective, top one), and I still have a Code 28 under "3D Video Controller" - all when plugged in to my working bottom card. Plugged into the 'bad' card still gives no image on the monitor, which I would guess means it's 'died'.

    I'm currently in the process of backing up my stuff, ready to install the 64-bit Windows 7. It's just annoying that I've had this RSI in my wrists for the past 2 months now
      My Computer


  8. Posts : 966
    Windows 7 Ultimate 64-bit
       #8

    Let's try removing your "dead" card and starting up the system and see what we come up with.

    Also run "sfc /scannow" (no quotes) for kicks.
      My Computer


  9. Posts : 4,280
    Windows 7 ultimate 64 bit / XP Home sp3
       #9

    I would have suggested you have run memtest Memtest86 - Download Page at least 5 passes each 1 stick at a time once you had figured out what slots to run them in.
    It is also a well know fact that mixing ram is NEVER a good idea. They should be from the same manufacture and have the same timings and voltage ratings as well as speed.
    You should then refer to your manual for the proper slotting of the ram sticks.
    But it sounds like you have that part worked out.

    Follow the suggestion above to just install the "good card" in the top slot using the the right video out port on the card to see if it works properly. This will eliminate the slot and the card of possibly being the problem. If successful, then remove and try the "bad card in the same way. this time try both outlets on the card. If you stll have the problem then you have a bad card.
    If it works in just one of your video out sockets then you know you have a bad video out socket on that card. And should be able to run the first card "good one" in the top slot and the second one "bad card" in the bottom slot and still be ble to run sli providing it only has a bad video out port.
    Post back and we'll see where we are.

    This whole "bad card thing has me concerned. As well as the report that it was not plugged into a Nvidia GPU
    Thanks.. Fabe
      My Computer


  10. Posts : 65
    Windows 7 Home Premium 64-bit (6.1, Build 7601)
    Thread Starter
       #10

    The screws to my graphics cards out are so tight I can't even budge them! (the screws are awkwardly placed near where the case sticks out a bit, so I can't get much force to the screws) So I'm not sure how I'l be able to get the cards out.

    I've ran 'sfc /scannow', but I've forgotten how to keep the window from disappearing so I can see the results of it (is it supposed to take a while to scan whatever? It just pops up and off almost in the blink of an eye.)

    My computer is fully backed up, ready to install 64-bit Windows 7. Shall I just leave the graphics cards for now? I could always try another time, after I've installed 64-bit Win 7?
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 10:55.
Find Us