screen resolution

Page 1 of 2 12 LastLast

  1. Posts : 41
    windows 7
       #1

    screen resolution


    is maximum screen resolution depends on monitor or whether i ve to put graphic card to increase resolution???????
      My Computer


  2. Posts : 6,305
    Windows 7 Ultimate x64
       #2

    It's dependent in both Monitor, the Graphics Card is limited by the max resolution that the monitor can handle.
      My Computer


  3. Posts : 41
    windows 7
    Thread Starter
       #3

    my case i dont ve a graphic card!!!!!!mine s a samsung 20 inch led monitor can u say me the maximum screen resolution plz!!!!!
      My Computer


  4. Posts : 228
    Win7 Ultimate x64
       #4

    Orbital Shark said:
    It's dependent in both Monitor, the Graphics Card is limited by the max resolution that the monitor can handle.
    You are saying that the obtainable resolution is dependent on both the graphics card and the monitor?

    Therefore, when a person purchases a graphics card he should have in mind the size of his monitor? That sounds logical.

    I have a Nvidia GTS450 and my monitor is a 32" Bravia.

    But what do you do when you have an onboard graphics card which is apparently what Aravintharajan has?
      My Computer


  5. Posts : 41
    windows 7
    Thread Starter
       #5

    But what do you do when you have an onboard graphics card which is apparently what Aravintharajan has?
    it is a inbuild 256mb graphic memory which comes with my processor core 2 duo!!!!!
      My Computer


  6. Posts : 6,305
    Windows 7 Ultimate x64
       #6

    If you could provide the make/model of the monitor we can give you the full hardware specification of it, including maximum resolution.
      My Computer


  7. Posts : 2,039
    Several, including Windows 7 x64 Ultimate
       #7

    The on-board graphics will support any monitor for which an interface is available, ( Usually an analog or VGA plug).

    You can set the resolution for anything the monitor is capable of, but the recommended maximum is the best.



    If you try to use some videos or games etc. In full resolution, on a large monitor, using many of the available on-board graphics chips, then you will have problems, because the graphics chip is not powerful enough.

    Getting the best display on your monitor

    Regards....Mike Connor
      My Computer


  8. Posts : 4,466
    Windows 10 Education 64 bit
       #8

    C32C3 said:
    Orbital Shark said:
    It's dependent in both Monitor, the Graphics Card is limited by the max resolution that the monitor can handle.
    You are saying that the obtainable resolution is dependent on both the graphics card and the monitor?

    Therefore, when a person purchases a graphics card he should have in mind the size of his monitor? That sounds logical.

    I have a Nvidia GTS450 and my monitor is a 32" Bravia.

    But what do you do when you have an onboard graphics card which is apparently what Aravintharajan has?
    It doesn't really matter if its built in or a dedicated card, what you need to know is it's maximum supported resolution and what type of connector it has. Then when you buy your monitor you make sure that its native resolution is supported by the video card and it has a matching video connector. If the two don't match your picture quality will suffer. You can usually get away with it on a CRT monitor but LCD monitors are not so forgiving. If you are going to go big screen you more than likely want to get a good dedicated video card with lots of onboard RAM.
      My Computer


  9. Posts : 41
    windows 7
    Thread Starter
       #9

    Orbital Shark said:
    If you could provide the make/model of the monitor we can give you the full hardware specification of it, including maximum resolution.
    it is Samsung 2030 monitor lcd
      My Computer


  10. Posts : 592
    WIN7 Ultimate 64bit
       #10

    Your Samsung monitor 'native resolution' setup would be

    1600 X 900 at 60hz in Win7

    You get two monitor drivers from Samsung.
    If you have connected with the DVi lead - use the 'digital' samsung monitor driver.
    VGA lead = analogue driver


    Panel/Display Type LCD Viewable Size 20" Brightness 250cd/m² Contrast Ratio 1000:1; 50,000:1 (Dynamic) Viewing Angle 170° horizontal, 160° vertical Pixel Dot Pitch 0.2768mm Response Time 5ms Panel Life Not Specified by Manufacturer Colors Supported 16.7 million Signal Internal Interface Analog/Digital Frequency Horizontal: 30-81kHz
    Vertical: 56-75Hz Sync Type Separate H/V Sync, Composite, SOG Resolution 1600 x 900 Input/Output Connectors Analog 1x VGA Digital 1x DVI Audio Input None Headphone Jack None Hub Ports No Speakers None Mount Desktop: Yes
    Wall-Mount: Yes, VESA 75mm Controls Buttons Not Specified by Manufacturer On-Screen Display Yes Auto Configuration Yes Touch Screen No Tilt/Swivel Range Tilt: 0-20°
    Swivel: None
    Pivot: None
    Height: None Security Kensington Security Slot Compliant Standards ENERGY STAR System Requirements Computer with DVI or VGA output Power Requirements AC: 100-240VAC, 50/60Hz
    Consumption: 25W (On), < 0.3W (Standby) Environmental Requirements Operating
    Temperature: 50-104°F (10-40°C)
    Humidity: 10-80%, non-condensing

    Storage
    Temperature: -4-113°F (-20-45°C)
    Humidity: 5-95%, non-condensing Dimensions (WxHxD) With Stand: 19.4 x 15.6 x 7" (49.2 x 17.8 x 39.6cm)
    Without Stand: 19.4 x 13 x 2.7" (49.2 x 33 x 7cm) Weight 9 lb (4.1kg)
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:58.
Find Us