Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Problems with detecting Panasonic TV by PC

04 Jun 2011   #1
ecioll

Windows 7 64bit
 
 
Problems with detecting Panasonic TV by PC

Hi, is anyone able to help?

I have a problem with connecting Panasonic Viera TX-32LXD70 to PC with Windows 7 and graphic card MSI Nvidia Gforce GTX560 TI.

I have tried using Mini HDMI to HDMI cable, and also DFI to HDMI, but none of them work. I have only one HDMI socket in the TV. And on the card there is only mini HDMI and two DFI sockets.

In Nvidia Contro Panel there is an option to find the second screen, but it does not detect it. I have also tried to find it in Screen Resolution options, but it also does not see it.

I have had this TV connected in the past, but since upgrading to Win 7 (and also buying a new pc) I have been unable to do it.

I have also all the recent drivers for the graphic card.

Any help would be greatly appreciated.


My System SpecsSystem Spec
.
04 Jun 2011   #2
ski

windows 7
 
 

Did you select HDMI in the Panasonic's on-screen input signal menu?
My System SpecsSystem Spec
04 Jun 2011   #3
ecioll

Windows 7 64bit
 
 

Thanks Ski, I did. I have just noticed that I have two HDMI sockets in the TV, but I have tried both and none of them works.
My System SpecsSystem Spec
.

04 Jun 2011   #4
flakey

windows 7 home prem. 64 bit
 
 

Right click on desktop, Graphic options...output to.....tv. hope this helps
My System SpecsSystem Spec
04 Jun 2011   #5
ecioll

Windows 7 64bit
 
 

Thanks Flakey, but I can't see this option on Win 7, there is only Sreen Resolution. I have tried detecting another display there, but it is not finding anything.
My System SpecsSystem Spec
04 Jun 2011   #6
ski

windows 7
 
 

So you're saying that the Panasonic TV is not detected in Windows 7/Control Panel/Display/Adjust Resolution.
My System SpecsSystem Spec
04 Jun 2011   #7
ski

windows 7
 
 

Make sure the computer and TV are both turned off when connecting the cable from the computer to the TV.
Next, turn on the TV, and select the correct HDMI port in the on-screen input signal menu.
Then, turn on the computer, and see if the TV is detected in Control Panel/Display/Adjust Resolution.
If it is, select the "Recommended" resolution for the TV, "Landscape" for Orientation, and "Extend These Displays" for Multiple Displays.
Then, click Apply or OK.
My System SpecsSystem Spec
04 Jun 2011   #8
ecioll

Windows 7 64bit
 
 

Thank you Ski, we are one step closer :-) Using your method (turning computer and tv off) and mini HDMI do HDMI cable computer has detected tv, but we can't see anything on the tv, there is just a black screen (it shows 1080p in the corner, and HDMI1 or HDMI2).When we've used DVI to HDMI cable it did not detect tv, but strangely, when the computer was starting up it was showing everything on the tv and nothing on the computer screen.
My System SpecsSystem Spec
05 Jun 2011   #9
ski

windows 7
 
 

You're welcome.

See if any of the following work -

Configure the tv as the primary display.

Set the tv resolution to the same resolution as the monitor.

Configure the tv as the sole display in "Multiple Displays".
My System SpecsSystem Spec
05 Jun 2011   #10
ecioll

Windows 7 64bit
 
 

Hi Ski, thanks a lot. We have tried all these options but still without luck - and Windows 7 did not like it and decided to crash, even systems restore did not work. We had to recover Windows mirror image form another hard drive using Acronis... I'm just gonna have to give up :-(
My System SpecsSystem Spec
Reply

 Problems with detecting Panasonic TV by PC




Thread Tools




Similar help and support threads
Thread Forum
startup repair is just detecting problems and thats it! nothing else!
My issue is that my sony vaio VPECH laptop windows 7 wont start like it used to. this issue arised a few days ago, basically the problem is that everytime i start my laptop it gives me two options Launch startup repair (which was recommended) Or start windows normally i chose the recommended...
Backup and Restore
Panasonic Dot Matrix
hi all. im looking for panasonic kx-p1121 win 7 driver. its connected to my pc using LPT printer port. please help
Drivers
Some queries and Problems!!Lag,slow and not detecting!!
Hi,all Sevenuser445 here,I need some helps!! 1.Pc running very fast at startup.But after running Some applications or games or browser it becomes a bit laggy.Annoying.Dont tell about virus,ccleaner,%temp%,recent ,tree,clean ram etc.Please suggest some thing.Already checked those. 2.My...
General Discussion
Problems detecting printer
I've just done a clean install with Win7 Pro x64 and want to install my printer (Brother DCP-9045CDN), but so fare without any luck. My printer is connected directly to my router (Zyxel P-2602HW) with an ethernet cable and the DHCP server in my router is active. The problem is that Windows...
Network & Sharing
Problems with New computer detecting old hard drive..
Hello everyone, new here and I have a problem. I'm trying to install a 320 gig Western Digital Hard Drive WD3200AAJB into my wife's new Dell 7100 XPS. It has all of her photography photos (a few years worth) on this hard drive, so it is extremely important to her and me as well. Hope my...
General Discussion
Nero 9 in Windows 7 has problems detecting drive speed?
Has anyone else noticed that Nero 9 in Windows 7, even the latest update, when you are burning a disc has a problem detecting what speed the disc should use? At first, I thought it was a problem with my DVD burner in my laptop, it was only allowing me to choose 4X speeds when my drive supports 8X...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:33.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App