And now one even newer than that one,
AMD Catalyst 12.x (9.00 June 12) Unofficial BETA - Guru3D.com Forums
P.S. It also has updated AHCI/RAID drivers in it for those with AMD based motherboards,
Code:
AMD AHCI controller driver distribution list
Version 1.2.001.0331, 04/11/2012
LHx64 - Vista, x64
LHx86 - Vista, x86
Win7x64 - Windows 7, x64
Win7x86 - Windows 7, x86
Supported chipsets
SB7xx family
SB8xx family
Hudson-1/2/3 family
SB9xx family
SP5100
Installation Notes
The driver can be installed either during OS setup or as an update
To install the driver during OS setup use a setup dialog window on Vista and higher (use the advanced settings to configure the Windows Setup program to use the specific driver; click “Load Driver” to load the specific driver from the media that includes the driver).
To install the driver as an update use the Windows Device Manager.
Revision History
1.2.001.0331
- Fix: System hang-up on some BIOS implementations
1.2.001.0329
- Win7 to Win8 update failure fix (BSOD 0x BE)
1.2.001.0327
Fixed:
- READ NATIVE MAX ADDRESS EXT failure
1.2.001.0321
Fixed:
- ZPODD hot swap support added (optional, available only w/ appropriate BIOS support); 10 sec delay should be observed between device un-plug and hot-plug; “Safely Remove Hardware and Eject Media” applet recommended to be used to eject a CDROM before physical removal.
- Port Multiplier support is enabled by default on eSATA ports.
1.2.001.0317
Fixed:
- Roxio SW prevents ZPODD to enter the ZP mode
1.2.001.0301
Fixed:
- Roxio media erase failure
- DVD region tab might be absent, when the “Properties” menu item is clicked in the Device Manager
- The sequence of operations - the PREVENT ALLOW MEDIUM REMOVAL (Prevent = 1) command, a pause longer than 1 min, the PREVENT ALLOW MEDIUM REMOVAL (Prevent = 0) command or PREVENT ALLOW MEDIUM REMOVAL (Prevent = 1), Sleep, Resume prevents a ZPODD to enter the ZP state
1.2.001.0296
- _SDD/_GTF methods evaluation added
1.2.001.0292
- Power DVD disk eject failure fix
1.2.001.0282
Fixed:
- Possible failure to enter power saving states having ongoing ZPODD activity
1.2.1.275
- Memory usage optimization
- ZPODD power on incurred 10 sec delay workaround
- Potential DMA overrun bug fix
1.2.1.263
- Performance optimization
- Boot Optimization
- TRIM implementation
1.2.1.238
Added
- Zero Power ODD support (if enabled in BIOS; Windows 7 only); the ZPODD is powered off after 60 Sec w/o media inside and tray closed (for tray type ZPODDs)
- DAPS support
- DIPM Setting Index 3 added to AHCI Link Power Management Settings (in addition to existing Active(0), HIPM(1) and HIPM+DIPM(2) ) and can be chosen to any Power Scheme using the inbox utility powercfg.exe
1.2.001.210
Renamed
- amdsata.inf -> amd_sata.inf
- amdsata.cat -> amd_sata.cat
- amdsata.sys -> amd_sata.sys
- amdxata.sys -> amd_xata.sys
1.2.001.197
- Fix a bug where FUA was re-enabled after hibernation / de-hibernation operation and it is now disabled under all conditions.
1.2.0.164
- Minor bug fix
1.2.0.147
- Slight performance improvement
- FUA is changed to be disabled by default
1.2.0.144
- Slight performance improvement
- Port Multiplier enumeration optimization
- Velocity test numbers improved
1.2.0.125 – first release