Latest AMD Catalyst Video Driver for Windows 7

just installed my wei stayed the same 7.8 graphics and 3d thanks guys

I don't think it goes much higher than that anyways.

Zen00 said:

I don't think it goes much higher than that anyways.

well when i just installed the 10.11 without the hotfix you members suggested i was running a 6.8 like wtf happened there ?

Well im happy now but still got a few bsod's while gamming something about the amd cpu cache i looked into it but really can't tell why it is happening i also reset the graphics card and it still bsod .

This particular situation i was looking at the error log alot of people suggested bad ram but that isnt the case I dont have another pci -e slot also suggested bios needs to be updated did that as well.

Can someone maybe give a eduacated guess i pretty much did all the trouble shooting areas memtest and all but the bsod is not always just occasionaly also the report was saying something that the card wasn't looping fast enough or got stuck is there something wrong with the cpu or is it my card in general too much load on it?

One more thing it also mentioned my virus might be corrupting it technicly windows doesn't reconize it so what could it be i use WEBROOT SPYSWEEPER WITH ANTI VIRUS

All answers will be welcomed thanks in advanced

well i used the 11.1 a hot fix on the 10.11 is that were i f'up'ed?

It says im using 10.12

i see thank you stormy for the info

Now if i can just figure why i get those random BSOD's

actually soon im going to change the board and ram anyone think that could lick my issue ?

Solarstarshines said:

Zen00 said:

I don't think it goes much higher than that anyways.

well when i just installed the 10.11 without the hotfix you members suggested i was running a 6.8 like wtf happened there ?

Well im happy now but still got a few bsod's while gamming something about the amd cpu cache i looked into it but really can't tell why it is happening i also reset the graphics card and it still bsod .

This particular situation i was looking at the error log alot of people suggested bad ram but that isnt the case I dont have another pci -e slot also suggested bios needs to be updated did that as well.

Can someone maybe give a eduacated guess i pretty much did all the trouble shooting areas memtest and all but the bsod is not always just occasionaly also the report was saying something that the card wasn't looping fast enough or got stuck is there something wrong with the cpu or is it my card in general too much load on it?

One more thing it also mentioned my virus might be corrupting it technicly windows doesn't reconize it so what could it be i use WEBROOT SPYSWEEPER WITH ANTI VIRUS

All answers will be welcomed thanks in advanced

How many RAM cards do you have?

Sometimes, when you have lots of RAM and/or RAM cards, you need a CPU-NB voltage bump. This is for the CPU integrated memory controller.

D/L CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.

Have you been checking your temperatures?

Go to your BIOS and tell us what the CPU, RAM and North Bridge/memory controller (CPU-NB) voltages are.

They are usually around 1.0 - 1.1v, bump it to 1.2v.

here's a snip i see my ram has two different voltages should i swap out the 2 sticks with the higher voltage ?

i have the same exact ram except two of them are the gaming series and the other isnt but duplicate specs and same vendor g-series viper ram patriot 8 gigs

also this is my ram http://www.frys.com/product/5958394?...H:MAIN_RSLT_PG

http://www.frys.com/product/5447899?...H:MAIN_RSLT_PG

i think the ram doesnt match even though they bare the same latency i think i might have solved my own problem what do you think

Most important is the CPUZ Memory tab, this tells us what the actual settings are, the SPD tab is the recommended settings and voltages, they are not actual voltages and settings.

This will tell me what needs to be done, include this in your next post.

Go to your BIOS and tell us what the CPU, RAM and North Bridge/memory controller (CPU-NB) voltages are.

Mixing RAM can cause problems, but they do work sometimes.
Since yours are close to the same, I would check the settings/voltages before buying any new RAM.

The EPP#1 is different, so make sure you are running JEDEC #3 settings. You won't notice a difference going from EPP#1 to JEDEC #3.