HTPC resoultion problems on pj W5000


  1. Posts : 2
    Windows 7 home premium 32bit
       #1

    HTPC resoultion problems on pj W5000


    Hi,

    I have a problem with the resolution on my projector BENQ W5000. The resolution is set to 1920x1080 on the pc, via my receiver Onkyo TX-NR809 to the pj. The signal my pj receive is only 1400x1050. The image is streched and I have to downscale to 1386x720 to make it fit the screen. The pj should be able to run on 1920x1080 and I have NO idea what the problem might be!

    PC resolution is set to 1920X1080
    Reveiver input 1920X1080
    Receiver output 1920x1080 (Signal settings: through)
    Pj receive 1400x1050 /60Hz
    10 meter Argon HDMI cable

    Signal my pj receive from cable/sat is 1080 /50p so it cant be the HDMI cable???

    What is happening to the signal when it goes from the receiver to the pj?

    -Mike
      My Computer


  2. Posts : 357
    Windows 7 Home Pre
       #2

    Have you tried Direct too the Pj to rule out the Projector and aim it at the Receiver.
      My Computer


  3. Posts : 2
    Windows 7 home premium 32bit
    Thread Starter
       #3

    mrdemon said:
    Have you tried Direct too the Pj to rule out the Projector and aim it at the Receiver.
    I forgot to mention it, but I also have a Full HD TV connected and the resolution on the telly can be set to 1920x1080 without problems. I doubt that the receiver is the problem, but I will try connecting it directly..
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:14.
Find Us