Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Attempting to crossfire 6950s...warning led?

09 Feb 2012   #11

Windows 8.1 Pro RTM x64

I've unmarked your thread until you state your issue is fully resolved.

I recall another thread regarding a Corsair PSU here: New PSU-Won't boot

Although it is for a different PSU model, some of the info might be pertinent. You might find more help here: Power Supplies - The Corsair Support Forums Click on Search and then enter ax1200 into the box, click on Show threads or Show posts as appropriate and then click Go.

My System SpecsSystem Spec
09 Feb 2012   #12

Windows 7 Ultimate 64-Bit SP1

Thank you Dwarf, I should have unmarked.

I appreciate you trying to help with the PSU, but it's not just that it will not boot. As I stated in my previous post, I believe it blew a capacitor due to the extremely loud pop.
Was asking if anyone had experience with blown PSU capacitors, and if it would take other components with them.

Just got a call from the shop, the only component that went was the PSU. Tossed another psu in and it fired right up.

Remarking as solved, thank you to all who took time to lend a hand! :)
My System SpecsSystem Spec

 Attempting to crossfire 6950s...warning led?

Thread Tools

Similar help and support threads
Thread Forum
r7 250 crossfire help
When I install both the screen just goes black and the PC just sits there and making sounds. No post sound errors no turning off. Just sits there like its booting up but no display. I am pretty sure that the r7 250 can be crossfire enabled. Just not sure how to set it up. Help? Ok so trouble...
Graphic Cards
install program driver warning ,can i reset the warning?
Hi i guess general discussion is the right place because it's not closely related to drivers well i have installed Softperfect Ram Disk last version i used revo uninstaller pro , to track this program well during the installation i got a warning about the installation of the Softperfect...
I am building a new computer and i want to crossfire 2 GPU's. However I also want to crossfire 2 Workstation GPU's. I have never tryed to do this but would there be any issues with this setup? I know that the AMD workstation cards use diffrent CCC.
Graphic Cards
Crossfire help!!
I have 2 ATI 4830, one is plugged into PCIE X16 and the other is in PCIE X4. I have the crossfire bridge connected and it worked first time and windows detected both cards and enabled CrossFireX through ATI CCC. Played a few games and it worked just fine. But i shut it down then because i went...
Graphic Cards
Crossfire ?
Hello, a quick question. Can i crossfire a ati X1950pro and a Asus EAH3870 ? So yes, which one goes master ? grts V
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:36.
Twitter Facebook Google+