2nd Monitor not detected w/ vga to dvi-d adapter


  1. Posts : 3
    Windows 7 Professional SP1 64-bit
       #1

    2nd Monitor not detected w/ vga to dvi-d adapter


    Hello All,

    I'm running a ASUS P8H67-V REV 3.0 mothboard which has a VGA and a DVI-D output. When I connect a second monitor w/ a vga to dvi-d adapter, it does not detect the monitor at all. I've tested the DVI-D port with a dvi to hdmi cable to my TV, at it works as soon as I hook that up. Below is the onboard graphics info. Any help would be much appreciated.

    ----

    Intel(R) HD Graphics 2000

    Report Date: 3/2/2012
    Report Time[hr:mm:ss]: 16:33:45
    Driver Version: 8.15.10.2509
    Operating System: Windows 7 Service Pack 1(6.1.7601)
    Default Language: English (United States)
    DirectX* Version: 10.1
    Physical Memory: 8103 MB
    Minimum Graphics Memory: 64 MB
    Maximum Graphics Memory: 1696 MB
    Graphics Memory in Use: 55 MB
    Processor: Intel64 Family 6 Model 42 Stepping 7
    Processor Speed: 3399 MHz
    Vendor ID: 8086
    Device ID: 0102
    Device Revision: 09

    * Processor Graphics Information *

    Processor Graphics in Use: Intel(R) HD Graphics 2000
    Video BIOS: 2119.0
    Current Graphics Mode: 1280 by 1024

    * Devices Connected to the Graphics Accelerator *

    Active Monitors: 1
    * Monitor *

    Monitor Name: Generic PnP Monitor
    Display Type: Analog
    Gamma Value: 2.2
    DDC2 Protocol: Supported

    Maximum Image Size:
    Horizontal: 13.39 inches
    Vertical: 10.63 inches

    Monitor Supported Modes:
    640 by 480 (75 Hz)
    640 by 480 (60 Hz)
    640 by 480 (75 Hz)
    720 by 400 (70 Hz)
    800 by 600 (75 Hz)
    800 by 600 (75 Hz)
    800 by 600 (60 Hz)
    832 by 624 (75 Hz)
    1024 by 768 (75 Hz)
    1024 by 768 (60 Hz)
    1024 by 768 (75 Hz)
    1152 by 870 (75 Hz)
    1280 by 1024 (60 Hz)
    1280 by 1024 (75 Hz)

    Display Power Management Support:
    Standby Mode: Supported
    Suspend Mode: Supported
    Active Off Mode: Supported

    Raw EDID:
    00 FF FF FF FF FF FF 00 1E 6D 6F 43 2D 00 02 00
    04 0F 01 03 6E 22 1B 78 EA 2E E5 A4 57 4A 9C 25
    11 50 54 A5 6B 80 31 4F 45 4F 61 4F 81 80 01 01
    01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70
    13 00 52 0E 11 00 00 1E 00 00 00 FD 00 38 4B 1E
    53 0E 00 0A 20 20 20 20 20 20 00 00 00 FC 00 4C
    31 37 31 35 53 0A 20 20 20 20 20 20 00 00 00 FC
    00 0A 20 20 20 20 20 20 20 20 20 20 20 20 00 DA

    * Other names and brands are the property of their respective owners. *
      My Computer


  2. Posts : 6,879
    Win 7 Ultimate x64
       #2

    digitalrebel11, welcome to the Seven Forums.

    You answered your own question, you just don't realize it,

    When I connect a second monitor w/ a vga to dvi-d adapter,
    DVI-D is digital only, that is why it isn't being detected. Also the adapter will be VGA to DVI-I, which is for an analogue signal which is required for the VGA adapter to work.
      My Computer


  3. Posts : 3
    Windows 7 Professional SP1 64-bit
    Thread Starter
       #3

    Why do they make a DVI-D to VGA adapter if it won't work? I didn't realize that meant digital only, I just looked at this image: FileVI Connector Types.svg - Wikipedia, the free encyclopedia and picked the one that matched what I had on the mobo. I guess the port won't support VGA at all?
      My Computer


  4. Posts : 6,879
    Win 7 Ultimate x64
       #4

    Why do they make a DVI-D to VGA adapter
    They don't. What they make is a DVI-D to VGA converter, which is required to convert the digital signal to analogue. The DVI-VGA adapters don't, they just pass the analogue signal (when present). The converters are also rather more expensive, with most costing upwards of $200 or more.
      My Computer


  5. Posts : 3
    Windows 7 Professional SP1 64-bit
    Thread Starter
       #5

    Oh but they do, this is the one I just bought from newegg and is currently on my computer: Newegg.com - Rosewill RA-VGA-DVI-D 25pin (24+1) DVI-D male to 15pin VGA female Adapter

    Apparently it isn't being sold anymore. How curious.

    Thanks for your help, looks like I'll need a graphics card after all.
      My Computer


  6. Posts : 6,879
    Win 7 Ultimate x64
       #6

    That still isn't a DVI-D adapter. If fact if you read some of the feedback on it you will find this,

    Manufacturer Response:Dear Valued Customer,
    Make sure that the adapter is fully secured to the video card and that it isn't loose. Also, are you using it with the same monitor and make sure that the DVI port that you are using it with is not a DVI-d port. If it is a DVI-d port, then a DVI to VGA adapter will not work for there will be no analog signal for the adapter to detect and pass onto the cable and monitor. If you are still having issues after that, please contact the Rosewill support team either via phone at 800-575-9885 or via email at techsupport@rosewill.com.
    Thanks,
    Rosewill Customer Care
    Unfortunately most places including that link mislabel it. You want to connect a VGA display to a DVI-D connection you need something like this,

    DVI-D to VGA | DVI-D to VGA Converter/Adapter
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:39.
Find Us