Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: LP240zx display port problem

23 Aug 2009   #1
ajr

windows 7
 
 
LP240zx display port problem

I have very unusual problem.
New HPZ800 quad core with QuadroCX video card running Windows 7 64bit release candidate. 6 mb Ram. Remarkable performance.

Bought dreamcolor HP Monitor. Ran fine. Latest firware. Newest Nvidia drivers. Newest monitor drivers. Calibrated fine with Spider Elite colorimeter. Profile appears very good.

One hour later goes into screen saver mode or something. Black screen using Display port. Use display port adapter to DVI cable works fine. This appears to exclude bad display port output from card.

This is the second monitor that does this. The first was reported as monitor defect.

Anyone had this experience or suggestion?

AJR


My System SpecsSystem Spec
.
24 Aug 2009   #2
Cyberwolf

Windows 7 Ultimate x64
 
 

I'd try disabling all Power Saving options in Win7. Set power profile to High Performance and then go into the Advanced section and nuke anything related to display or graphics.

Just a suggestion, not sure if it will help.
My System SpecsSystem Spec
08 Jan 2010   #3
SgtPepper76

Windows 7
 
 

I can tell you that I've seen this exact problem on two z800's where I work. This is the first thread I've found online where someone has mentioned the same issue.

XP 64 is installed on both systems here. New systems, new monitors, etc. I was on the phone with HP support and we've replaced the display port adapter and the video card with no success. Changed out which PCI-E slot the video card was in, same issue. It only happens when the monitors go to sleep. The monitor on the display port connection just never comes back up (won't even be detected actually). I'm curious if when you have this problem, if you go into the Nvidia Control Panel and try to select dual display, does the menu seem to flicker and keep resetting your choice?

I'm about to try disabling the powersave features here but it's a bit tricky since those settings are controlled by a GPO from Big Brother.
My System SpecsSystem Spec
.

08 Jan 2010   #4
SgtPepper76

Windows 7
 
 

Meant to ask the original poster this as well...Can you get the second monitor to work after a reboot? That's another symptom we're seeing here.
My System SpecsSystem Spec
09 Jan 2010   #5
ajr

windows 7
 
 

all fixed with recent monitor firmware upgrade.
No problem with 2 monitors
My System SpecsSystem Spec
Reply

 LP240zx display port problem




Thread Tools




Similar help and support threads
Thread Forum
looking for a 8' display port cable
Moved my desk and added another desk (so I can work on other computers, and my airsoft guns). I'm in the process of getting all the cables where I need them to go and I need a shorter display port cable for the center display. The length is 8 feet and I can't find one. I went to MicroCenter...
Chillout Room
display port or DVI?
I just bought a new display that has DVI, display port and VGA. I'm looking at getting an EVGA GTX980 which has DVI and display port. What would be a better choice? The display is 1920x1080 at 60Hz.
Graphic Cards
HDMI<> Display Port
I have been doing a lot of research but all I find is B/S like when they were invented, royalty rights, extra pins ect. but not just some basics answers to some basic questions. I have a video card and display both with HDMI and Display Port ability. At the present time I'm using HDMI to HDMI....
Graphic Cards
Display Port to HDMI
As in an earlier post I have upgraded my old XP Media PC to a Lenovo M92p running Win7 64 bit. It has a VGA out but also has a mini Display port for which I bought the DSP to HDMI cable. The PC uses my SONY 46" TV as a screen using the VGA connection no problem but I then need to run audio cables...
Music, Pictures & Video
ATI Radeon 4670 Display Port Problem
I have an ATI Mobility Radeon HD 4670 (on my Dell Studio XPS 1640 notebook) and I just tried to use my external monitor (Dell P2210) through a DisplayPort cable, but it did not work in Windows 7 (x64). It did display the BIOS and the Windows startup screen, but after the startup the (external)...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:48.
Twitter Facebook Google+