Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Monitor Resolution out of range when trying to set 1680x1050

01 Apr 2009   #21
Mark

Windows 7 Ultimate Vista Ultimate x64
 
 

Quote   Quote: Originally Posted by aCIDfire View Post
Iīve b7057 x64 + ATI 4850 + EIZO HD2442W (DVI cable) and looking in user manual there is written that it supports 60Hz in 1920x1200 but in W7 its set
to 59Hz but in OSD on monitor is 60Hz. In control pan. I can choose between
59 and 60Hz but after restart itīs set 59Hz. Any solution how to fix it permanently to 60Hz?
I've had the same problems to on all the Builds since the Beta release and the only time I've had it stick was when I was using the latest Windows 7 driver from Nvidia, unfortunately that doesn't help you as you have an ATI, so I guess you will have to wait until they make a fully compatible driver.


My System SpecsSystem Spec
.
01 Apr 2009   #22
aCIDfire

Windows7 b7057
 
 

Quote   Quote: Originally Posted by Mr GRiM View Post
I've had the same problems to on all the Builds since the Beta release and the only time I've had it stick was when I was using the latest Windows 7 driver from Nvidia, unfortunately that doesn't help you as you have an ATI, so I guess you will have to wait until they make a fully compatible driver.
Thanks for reply! I worried about it if this non-standard frequency 59Hz couldnīt harm my new EIZO beast
My System SpecsSystem Spec
01 Apr 2009   #23
Mark

Windows 7 Ultimate Vista Ultimate x64
 
 

No I am sure that it wont harm it being 1Hz lower, if was higher maybe but not lower.
My System SpecsSystem Spec
.

09 May 2009   #24
tpi2007

Windows 7 RC 64-bit
 
 

I have a 8800GT with the latest Nvidia Drivers, using Windows 7 64-bit. I have a 20 inch widescreen LG Flatron L204WT using the VGA cable. It also has a DVI input, but it has never worked.

Windows 7 Beta 7000 had already compromised performance of the VGA connection from Windows XP.

I don't like the 1600x1050 resolution. Instead I use 1280x768. I have to set the refresh rate to 75Hz to achivethe perfect picture though. And there is no problem with this, because the monitor offically supports it.

Now Windows 7 Beta doesn't let me specify more than 60Hz, even after I install the LG "driver" files. This results in a less sharp image.

With the Release Candidate things got severly worse. I still can only get 59Hz or 60Hz, using the latest drivers from Nvidia and the monitor "driver" files from LG, but now I can only use the monitor at 1600x1050, and it always switches back to 59Hz. If I put any other resoltuion, the monitor's image shrinks to the center of the screen. Pressing the Auto configuration button on the monitor has the effect of pushing the shrinked image to the left.

More, when I look the setting on the monitor, it tells me ALWAYS, whatever the resolution I have set up, that I have 1600x1050 at 60Hz. Windows 7 is definetly not communicating with the monitor properly.

This is a severe fault that, despite all the good things about Windows 7, will prevent me from using it. I'm reverting back to XP until this is solved. And no, increasing the DPI is not the solution for me.
My System SpecsSystem Spec
09 May 2009   #25
baarod

El Capitan / Windows 10
 
 

Quote   Quote: Originally Posted by tpi2007 View Post
I have a 8800GT with the latest Nvidia Drivers, using Windows 7 64-bit. I have a 20 inch widescreen LG Flatron L204WT using the VGA cable. It also has a DVI input, but it has never worked.

Windows 7 Beta 7000 had already compromised performance of the VGA connection from Windows XP.

I don't like the 1600x1050 resolution. Instead I use 1280x768. I have to set the refresh rate to 75Hz to achivethe perfect picture though. And there is no problem with this, because the monitor offically supports it.

Now Windows 7 Beta doesn't let me specify more than 60Hz, even after I install the LG "driver" files. This results in a less sharp image.

With the Release Candidate things got severly worse. I still can only get 59Hz or 60Hz, using the latest drivers from Nvidia and the monitor "driver" files from LG, but now I can only use the monitor at 1600x1050, and it always switches back to 59Hz. If I put any other resoltuion, the monitor's image shrinks to the center of the screen. Pressing the Auto configuration button on the monitor has the effect of pushing the shrinked image to the left.

More, when I look the setting on the monitor, it tells me ALWAYS, whatever the resolution I have set up, that I have 1600x1050 at 60Hz. Windows 7 is definetly not communicating with the monitor properly.

This is a severe fault that, despite all the good things about Windows 7, will prevent me from using it. I'm reverting back to XP until this is solved. And no, increasing the DPI is not the solution for me.
Download this, run it, save the results and post them: http://www.entechtaiwan.com/files/moninfo.exe
My System SpecsSystem Spec
09 May 2009   #26
tpi2007

Windows 7 RC 64-bit
 
 

Quote   Quote: Originally Posted by baarod View Post
Download this, run it, save the results and post them: http://www.entechtaiwan.com/files/moninfo.exe

Hi, thanks for the program!

I installed it and ran it both under Win XP Home SP3 and Windows 7 64-bit

Here are de reports:

Windows XP:

Monitor Asset Manager Report, generated 09-05-2009 (5.1.2600)
Copyright (c) 1995-2009, EnTech Taiwan.
---------------------------

Hardware data
BUS_SLOT = PCI00000.PCI00004.PCI00008.PCI0000C.PCI00010.PCI00014.PCI00018.PCI0001C
00000000 = 29C08086.20900006.06000002.00000000.00000000.00000000.00000000.00000000
00000008 = 29C18086.00100007.06040002.00010008.00000000.00000000.00010100.2000C0C0
000000D8 = 27D88086.00100006.04030001.00000008.FA100004.00000000.00000000.00000000
000000E0 = 27D08086.00100007.06040001.00810008.00000000.00000000.00020200.2000B0B0
000000E8 = 27C88086.02800005.0C030001.00800000.00000000.00000000.00000000.00000000
000000E9 = 27C98086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EA = 27CA8086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EB = 27CB8086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EF = 27CC8086.02900006.0C032001.00000000.FA104000.00000000.00000000.00000000
000000F0 = 244E8086.00100007.060401E1.00010000.00000000.00000000.20040400.228000F0
000000F8 = 27B88086.02100107.06010001.00800000.00000000.00000000.00000000.00000000
00000100 = 061110DE.00100007.030000A2.00000008.F6000000.E000000C.00000000.F4000004
00000300 = 816810EC.00100007.02000001.00000008.0000D001.00000000.F9000004.00000000
00000408 = 71331131.02900006.048000D1.00004000.FA000000.00000000.00000000.00000000
--------
01020000 = 00FFFFFF.FFFFFF00.1E6D474E.516B0000.0B100103.6A2B1B78.EAD105A6.55479D25
00000020 = 155054A7.6B800101.81808140.714F0101.01010101.01012139.9030621A.274068B0
00000040 = 3600B20E.1100001C.000000FD.00384B1C.530F000A.20202020.20200000.00FC004C
00000060 = 32303457.540A2020.20202020.000000FC.000A2020.20202020.20202020.2020006F

---------------------------

Monitor #1 [Real-time 0x0021]
Model name............... L204WT
Manufacturer............. LGE
Plug and Play ID......... GSM4E47
Serial number............ 27473
Manufacture date......... 2006, ISO week 11
-------------------------
EDID revision............ 1.3
Input signal type........ Analog 0.700,0.000 (0.7V p-p)
Sync input support....... Separate, Sync-on-green
Display type............. RGB color
Screen size.............. 430 x 270 mm (20,0 in)
Power management......... Standby, Suspend, Active off/sleep
Extension blocs.......... None
-------------------------
DDC/CI................... Supported
MCCS revison............. 2.0
Display technology....... TFT
Controller............... Genesis 0x0
Firmware revision........ 0.1
Firmware flags........... 0x68
Active power on time..... 3237 hours
Current frequency........ 60,40kHz, 75,00Hz

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2,20
Red chromaticity......... Rx 0,651 - Ry 0,333
Green chromaticity....... Gx 0,277 - Gy 0,614
Blue chromaticity........ Bx 0,145 - By 0,082
White point (default).... Wx 0,313 - Wy 0,329
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 28-83kHz
Vertical scan range...... 56-75Hz
Video bandwidth.......... 150MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1680x1050p at 60Hz
Modeline............... "1680x1050" 146,250 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768p at 60Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 870p at 75Hz - Apple Mac II
1280 x 1024p at 60Hz - VESA STD
1280 x 960p at 60Hz - VESA STD
1152 x 864p at 75Hz - VESA STD

Report information
Date generated........... 09-05-2009
Software revision........ 2.30.0.797
Operating system......... 5.1.2600.2.Service Pack 3

Raw data
00,FF,FF,FF,FF,FF,FF,00,1E,6D,47,4E,51,6B,00,00,0B,10,01,03,6A,2B,1B,78,EA,D1,05,A6,55,47,9D,25,
15,50,54,A7,6B,80,01,01,81,80,81,40,71,4F,01,01,01,01,01,01,01,01,21,39,90,30,62,1A,27,40,68,B0,
36,00,B2,0E,11,00,00,1C,00,00,00,FD,00,38,4B,1C,53,0F,00,0A,20,20,20,20,20,20,00,00,00,FC,00,4C,
32,30,34,57,54,0A,20,20,20,20,20,20,00,00,00,FC,00,0A,20,20,20,20,20,20,20,20,20,20,20,20,00,6F




Windows 7 64-bit:


Monitor Asset Manager Report, generated 09-05-2009 (6.1.7100)
Copyright (c) 1995-2009, EnTech Taiwan.
---------------------------

Hardware data
BUS_SLOT = PCI00000.PCI00004.PCI00008.PCI0000C.PCI00010.PCI00014.PCI00018.PCI0001C
00000000 = 29C08086.20900006.06000002.00000000.00000000.00000000.00000000.00000000
00000008 = 29C18086.00100007.06040002.00010008.00000000.00000000.00010100.2000C0C0
000000D8 = 27D88086.00100006.04030001.00000008.FA100004.00000000.00000000.00000000
000000E0 = 27D08086.00100005.06040001.00810008.00000000.00000000.00020200.2000B0B0
000000E8 = 27C88086.02800005.0C030001.00800000.00000000.00000000.00000000.00000000
000000E9 = 27C98086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EA = 27CA8086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EB = 27CB8086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EF = 27CC8086.02900006.0C032001.00000000.FA104000.00000000.00000000.00000000
000000F0 = 244E8086.00100007.060401E1.00010000.00000000.00000000.20040400.228000F0
000000F8 = 27B88086.02100107.06010001.00800000.00000000.00000000.00000000.00000000
00000100 = 061110DE.00100007.030000A2.00000008.F6000000.E000000C.00000000.F4000004
00000300 = 816810EC.00100007.02000001.00000008.0000D001.00000000.F9000004.00000000
00000408 = 71331131.02900006.048000D1.00004000.FA000000.00000000.00000000.00000000
--------
01020000 = 00FFFFFF.FFFFFF00.1E6D474E.516B0000.0B100103.6A2B1B78.EAD105A6.55479D25
00000020 = 155054A7.6B800101.81808140.714F0101.01010101.01012139.9030621A.274068B0
00000040 = 3600B20E.1100001C.000000FD.00384B1C.530F000A.20202020.20200000.00FC004C
00000060 = 32303457.540A2020.20202020.000000FC.000A2020.20202020.20202020.2020006F

---------------------------

Monitor #1 [Real-time 0x0021]
Model name............... L204WT
Manufacturer............. LGE
Plug and Play ID......... GSM4E47
Serial number............ 27473
Manufacture date......... 2006, ISO week 11
-------------------------
EDID revision............ 1.3
Input signal type........ Analog 0.700,0.000 (0.7V p-p)
Sync input support....... Separate, Sync-on-green
Display type............. RGB color
Screen size.............. 430 x 270 mm (20,0 in)
Power management......... Standby, Suspend, Active off/sleep
Extension blocs.......... None
-------------------------
DDC/CI................... Supported
MCCS revison............. 2.0
Display technology....... TFT
Controller............... Genesis 0x0
Firmware revision........ 0.1
Firmware flags........... 0x68
Active power on time..... 3237 hours
Current frequency........ 65,00kHz, 60,00Hz

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2,20
Red chromaticity......... Rx 0,651 - Ry 0,333
Green chromaticity....... Gx 0,277 - Gy 0,614
Blue chromaticity........ Bx 0,145 - By 0,082
White point (default).... Wx 0,313 - Wy 0,329
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 28-83kHz
Vertical scan range...... 56-75Hz
Video bandwidth.......... 150MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1680x1050p at 60Hz
Modeline............... "1680x1050" 146,250 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768p at 60Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 870p at 75Hz - Apple Mac II
1280 x 1024p at 60Hz - VESA STD
1280 x 960p at 60Hz - VESA STD
1152 x 864p at 75Hz - VESA STD

Report information
Date generated........... 09-05-2009
Software revision........ 2.30.0.797
Operating system......... 6.1.7100.2

Raw data
00,FF,FF,FF,FF,FF,FF,00,1E,6D,47,4E,51,6B,00,00,0B,10,01,03,6A,2B,1B,78,EA,D1,05,A6,55,47,9D,25,
15,50,54,A7,6B,80,01,01,81,80,81,40,71,4F,01,01,01,01,01,01,01,01,21,39,90,30,62,1A,27,40,68,B0,
36,00,B2,0E,11,00,00,1C,00,00,00,FD,00,38,4B,1C,53,0F,00,0A,20,20,20,20,20,20,00,00,00,FC,00,4C,
32,30,34,57,54,0A,20,20,20,20,20,20,00,00,00,FC,00,0A,20,20,20,20,20,20,20,20,20,20,20,20,00,6F



Is there any solution for the problem ?

Thanks!
My System SpecsSystem Spec
09 May 2009   #27
ccatlett1984

 

Quote   Quote: Originally Posted by tpi2007 View Post
Hi, thanks for the program!

I installed it and ran it both under Win XP Home SP3 and Windows 7 64-bit

Here are de reports:

Windows XP:

Monitor Asset Manager Report, generated 09-05-2009 (5.1.2600)
Copyright (c) 1995-2009, EnTech Taiwan.
---------------------------

Hardware data
BUS_SLOT = PCI00000.PCI00004.PCI00008.PCI0000C.PCI00010.PCI00014.PCI00018.PCI0001C
00000000 = 29C08086.20900006.06000002.00000000.00000000.00000000.00000000.00000000
00000008 = 29C18086.00100007.06040002.00010008.00000000.00000000.00010100.2000C0C0
000000D8 = 27D88086.00100006.04030001.00000008.FA100004.00000000.00000000.00000000
000000E0 = 27D08086.00100007.06040001.00810008.00000000.00000000.00020200.2000B0B0
000000E8 = 27C88086.02800005.0C030001.00800000.00000000.00000000.00000000.00000000
000000E9 = 27C98086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EA = 27CA8086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EB = 27CB8086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EF = 27CC8086.02900006.0C032001.00000000.FA104000.00000000.00000000.00000000
000000F0 = 244E8086.00100007.060401E1.00010000.00000000.00000000.20040400.228000F0
000000F8 = 27B88086.02100107.06010001.00800000.00000000.00000000.00000000.00000000
00000100 = 061110DE.00100007.030000A2.00000008.F6000000.E000000C.00000000.F4000004
00000300 = 816810EC.00100007.02000001.00000008.0000D001.00000000.F9000004.00000000
00000408 = 71331131.02900006.048000D1.00004000.FA000000.00000000.00000000.00000000
--------
01020000 = 00FFFFFF.FFFFFF00.1E6D474E.516B0000.0B100103.6A2B1B78.EAD105A6.55479D25
00000020 = 155054A7.6B800101.81808140.714F0101.01010101.01012139.9030621A.274068B0
00000040 = 3600B20E.1100001C.000000FD.00384B1C.530F000A.20202020.20200000.00FC004C
00000060 = 32303457.540A2020.20202020.000000FC.000A2020.20202020.20202020.2020006F

---------------------------

Monitor #1 [Real-time 0x0021]
Model name............... L204WT
Manufacturer............. LGE
Plug and Play ID......... GSM4E47
Serial number............ 27473
Manufacture date......... 2006, ISO week 11
-------------------------
EDID revision............ 1.3
Input signal type........ Analog 0.700,0.000 (0.7V p-p)
Sync input support....... Separate, Sync-on-green
Display type............. RGB color
Screen size.............. 430 x 270 mm (20,0 in)
Power management......... Standby, Suspend, Active off/sleep
Extension blocs.......... None
-------------------------
DDC/CI................... Supported
MCCS revison............. 2.0
Display technology....... TFT
Controller............... Genesis 0x0
Firmware revision........ 0.1
Firmware flags........... 0x68
Active power on time..... 3237 hours
Current frequency........ 60,40kHz, 75,00Hz

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2,20
Red chromaticity......... Rx 0,651 - Ry 0,333
Green chromaticity....... Gx 0,277 - Gy 0,614
Blue chromaticity........ Bx 0,145 - By 0,082
White point (default).... Wx 0,313 - Wy 0,329
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 28-83kHz
Vertical scan range...... 56-75Hz
Video bandwidth.......... 150MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1680x1050p at 60Hz
Modeline............... "1680x1050" 146,250 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768p at 60Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 870p at 75Hz - Apple Mac II
1280 x 1024p at 60Hz - VESA STD
1280 x 960p at 60Hz - VESA STD
1152 x 864p at 75Hz - VESA STD

Report information
Date generated........... 09-05-2009
Software revision........ 2.30.0.797
Operating system......... 5.1.2600.2.Service Pack 3

Raw data
00,FF,FF,FF,FF,FF,FF,00,1E,6D,47,4E,51,6B,00,00,0B,10,01,03,6A,2B,1B,78,EA,D1,05,A6,55,47,9D,25,
15,50,54,A7,6B,80,01,01,81,80,81,40,71,4F,01,01,01,01,01,01,01,01,21,39,90,30,62,1A,27,40,68,B0,
36,00,B2,0E,11,00,00,1C,00,00,00,FD,00,38,4B,1C,53,0F,00,0A,20,20,20,20,20,20,00,00,00,FC,00,4C,
32,30,34,57,54,0A,20,20,20,20,20,20,00,00,00,FC,00,0A,20,20,20,20,20,20,20,20,20,20,20,20,00,6F




Windows 7 64-bit:


Monitor Asset Manager Report, generated 09-05-2009 (6.1.7100)
Copyright (c) 1995-2009, EnTech Taiwan.
---------------------------

Hardware data
BUS_SLOT = PCI00000.PCI00004.PCI00008.PCI0000C.PCI00010.PCI00014.PCI00018.PCI0001C
00000000 = 29C08086.20900006.06000002.00000000.00000000.00000000.00000000.00000000
00000008 = 29C18086.00100007.06040002.00010008.00000000.00000000.00010100.2000C0C0
000000D8 = 27D88086.00100006.04030001.00000008.FA100004.00000000.00000000.00000000
000000E0 = 27D08086.00100005.06040001.00810008.00000000.00000000.00020200.2000B0B0
000000E8 = 27C88086.02800005.0C030001.00800000.00000000.00000000.00000000.00000000
000000E9 = 27C98086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EA = 27CA8086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EB = 27CB8086.02800005.0C030001.00000000.00000000.00000000.00000000.00000000
000000EF = 27CC8086.02900006.0C032001.00000000.FA104000.00000000.00000000.00000000
000000F0 = 244E8086.00100007.060401E1.00010000.00000000.00000000.20040400.228000F0
000000F8 = 27B88086.02100107.06010001.00800000.00000000.00000000.00000000.00000000
00000100 = 061110DE.00100007.030000A2.00000008.F6000000.E000000C.00000000.F4000004
00000300 = 816810EC.00100007.02000001.00000008.0000D001.00000000.F9000004.00000000
00000408 = 71331131.02900006.048000D1.00004000.FA000000.00000000.00000000.00000000
--------
01020000 = 00FFFFFF.FFFFFF00.1E6D474E.516B0000.0B100103.6A2B1B78.EAD105A6.55479D25
00000020 = 155054A7.6B800101.81808140.714F0101.01010101.01012139.9030621A.274068B0
00000040 = 3600B20E.1100001C.000000FD.00384B1C.530F000A.20202020.20200000.00FC004C
00000060 = 32303457.540A2020.20202020.000000FC.000A2020.20202020.20202020.2020006F

---------------------------

Monitor #1 [Real-time 0x0021]
Model name............... L204WT
Manufacturer............. LGE
Plug and Play ID......... GSM4E47
Serial number............ 27473
Manufacture date......... 2006, ISO week 11
-------------------------
EDID revision............ 1.3
Input signal type........ Analog 0.700,0.000 (0.7V p-p)
Sync input support....... Separate, Sync-on-green
Display type............. RGB color
Screen size.............. 430 x 270 mm (20,0 in)
Power management......... Standby, Suspend, Active off/sleep
Extension blocs.......... None
-------------------------
DDC/CI................... Supported
MCCS revison............. 2.0
Display technology....... TFT
Controller............... Genesis 0x0
Firmware revision........ 0.1
Firmware flags........... 0x68
Active power on time..... 3237 hours
Current frequency........ 65,00kHz, 60,00Hz

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2,20
Red chromaticity......... Rx 0,651 - Ry 0,333
Green chromaticity....... Gx 0,277 - Gy 0,614
Blue chromaticity........ Bx 0,145 - By 0,082
White point (default).... Wx 0,313 - Wy 0,329
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 28-83kHz
Vertical scan range...... 56-75Hz
Video bandwidth.......... 150MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1680x1050p at 60Hz
Modeline............... "1680x1050" 146,250 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768p at 60Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 870p at 75Hz - Apple Mac II
1280 x 1024p at 60Hz - VESA STD
1280 x 960p at 60Hz - VESA STD
1152 x 864p at 75Hz - VESA STD

Report information
Date generated........... 09-05-2009
Software revision........ 2.30.0.797
Operating system......... 6.1.7100.2

Raw data
00,FF,FF,FF,FF,FF,FF,00,1E,6D,47,4E,51,6B,00,00,0B,10,01,03,6A,2B,1B,78,EA,D1,05,A6,55,47,9D,25,
15,50,54,A7,6B,80,01,01,81,80,81,40,71,4F,01,01,01,01,01,01,01,01,21,39,90,30,62,1A,27,40,68,B0,
36,00,B2,0E,11,00,00,1C,00,00,00,FD,00,38,4B,1C,53,0F,00,0A,20,20,20,20,20,20,00,00,00,FC,00,4C,
32,30,34,57,54,0A,20,20,20,20,20,20,00,00,00,FC,00,0A,20,20,20,20,20,20,20,20,20,20,20,20,00,6F



Is there any solution for the problem ?

Thanks!
windows 7 is using the "native settings" for the display, you could try installing rivatuner to force the settings you want, but the monitor doesnt support 75hz at the resolution that you want. with a lcd you dont need to push more than 60hz, there is no refresh line like on a CRT
My System SpecsSystem Spec
09 May 2009   #28
tpi2007

Windows 7 RC 64-bit
 
 

Quote   Quote: Originally Posted by ccatlett1984 View Post
windows 7 is using the "native settings" for the display, you could try installing rivatuner to force the settings you want, but the monitor doesnt support 75hz at the resolution that you want. with a lcd you dont need to push more than 60hz, there is no refresh line like on a CRT

Thanks, but it is not normal for Windows 7 to not display any other resolution properly other than the maximum one. There is obviously a problem with either Windows 7 or the Nvidia Drivers.

And it doesn't let me select 75Hz either for no reason. Mind you, this happens with the "Generic PnP Monitor" profile or the LG files which I installed on both OS'es. The monitor drivers I'm using are exactly the same under both Win XP SP3 and Win 7 RC, so there is no apparent reason for Windows 7 to be using the antive settings.

And, no, the monitor DOES support 1280x768 @ 75hz, I can post a picture of the Monitor OSD and Win XP SP3 if you want. Either way, I've been running it at this resolution since I bought the monitor, in March 2007!

If I set the refresh rate lower than 75Hz at this resolution it won't display properly. I know an LCD's refresh rate is not the same as in a CRT, but it DOES affect what you see on screen.

At this resolution I have perfect clarity. Who says monitors are only good at their maximum resolution? I find this perfect for long working hours with perfect clarity.
My System SpecsSystem Spec
09 May 2009   #29
ccatlett1984

 

windows should let you select the other resolutions that the monitor supports. Have you tried plugging in a different monitor to see if it shows more resolution options?

Grab the latest Nvidia win7 driver and install it. A new driver was just released on May 6th
My System SpecsSystem Spec
09 May 2009   #30
tpi2007

Windows 7 RC 64-bit
 
 

Quote   Quote: Originally Posted by ccatlett1984 View Post
windows should let you select the other resolutions that the monitor supports. Have you tried plugging in a different monitor to see if it shows more resolution options?

Grab the latest Nvidia win7 driver and install it. A new driver was just released on May 6th
Thanks, I have downloaded the Windows 7 64-bit drivers from Nvidia's site today, 2 hours before posting, so I should be up to date.

The question is not quite like you are putting it, Windows 7 lets me select other resolutions, the problem is that it doesn't display them correctly.

For example, if I set it to 1280x768 or 1280x720, the image shrinks to the middle of the screen, the rest being black. Everything is clear, but alas, small. Using the monitor's Auto Image Adjustment just shifts the shrinked image to the left of the screen. Not a single resolution gets displayed properly, except 1680x1050.

And my monitor's OSD says everytime the same thing: I'm running at 1680x1050 @ 60Hz, even if I'm running at an abnormally shrinked 1280x768 @ 59hz.

On the other hand, in Windows XP everything works fine, the Monitor's OSD displays exactly what I'm running. If I select 60Hz, the OSD says 60Hz, if I select 75Hz it says 75Hz. The same with the resolution.

Bear in mind, this is the same computer, two partitions, dual boot Win XP Home Edition SP3 and Win 7 64-bit.
My System SpecsSystem Spec
Reply

 Monitor Resolution out of range when trying to set 1680x1050




Thread Tools




Similar help and support threads
Thread Forum
I, too, cannot get 1680x1050 resolution
Selected Specs Monitor: Samsung SyncMaster 2253LW (21.6") with DVI connection Graphics Card: NVIDIA GeForce 210 OS: Windows 7 Ultimate x64 My friend just helped me build a new tower, and my monitor's default setting of 1680x1050 is simply unavailable to me, no matter what I do or where I...
Graphic Cards
Monitor out of range
I have been using Vista Home Premium 32 bit with a main monitor 32"TV and a secondary monitor - a 17" LCD PC monitor. Having transferred to Windows 7 on a new PC the secondary monitor now shows "out of range" on its screen. Can anyone tell me why this has happened. It is in the same place as...
Hardware & Devices
Monitor Out of Range in windows 7
I have installed my Pc a new windoes 7 ultimate x64 then after installation after the logo it does'nt appear anything but i can hear sounds so i use a CRT monitor so it displayed on the CRT but on my LCD it does'nt i try going safe mode with my LCD and it works on Safe mode so i deactivated my...
Graphic Cards
Graphic Card Resolution > Monitor Resolution
Native Resolution for my monitor is 1366 x 768. It's a 32 inch computer monitor. The reason for buying bigger screen for the computer is so that I can have more desktop display area so that I don't have to scroll horizontally to have a clear helicopter view of my subject. Only then I was made to...
Graphic Cards
Yet again... x64 Ultimate 1680x1050 resolution issue.
Hey everyone, Last time I posted on here, I had an issue with Win7 not recognising my ASUS VW223B monitor as a default 1680x1050 resolution. That problem solved itself when I bought myself a brand new Gigabyte GTS 250. However, One day, I open up Unreal Tournament 3, ready to kick some a****...
Graphic Cards
1680x1050 resolution option has disappeared
Hi, I'm in need of a lot of help here since I have no idea on how to remedy the situation. I'm running a Radeon 4850 on Windows 7 64-bit with a Westinghouse 22" monitor. I was installing the media manager for a Creative Zen (MP3) and when it was finished installing my screen was at 800x600 and...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Đ Designer Media Ltd

All times are GMT -5. The time now is 10:50.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App