ASUS HD5450 1GB DDR3 blank screen after Windows logo


  1. constantG
    Posts : 6
    Windows 7 Ultimate x64
       New #1

    Graphics card fail after windows logo - generic pnp monitor


    Hi,

    My kids PC has a problem with the new graphics card ASUS EAH5450 (Silent)
    All is well when the windows generic "Standard VGA adapter" drivers are installed, but when the ASUS EAH5450 drivers are installed the PC blank screens after the windows logo. The PC is still running but is not getting past the video driver.

    I have tried the following:

    Installed drivers from ASUS website, ATI website and auto install from windows update.
    Started in safe mode no problems
    Started in low VGA 640,480 mode with no problems

    so now I'm stumped.
    Last edited by constantG; 09 Jul 2012 at 21:22.
      My Computer
    Quote Quote

  3. constantG
    Posts : 6
    Windows 7 Ultimate x64
    Thread Starter
       New #2

    Ok so an update - I have downloaded and used the ATI detect and install program and it tells me that, although it's a desktop card, it should be the mobility driver and CCC.
    That done but still the same problem.

    Thanks in advance
      My Computer
    Quote Quote

  4. constantG
    Posts : 6
    Windows 7 Ultimate x64
    Thread Starter
       New #3

    Another update - I have tried the PC on another monitor and the problem disappears.
    Is it possible to install a different monitor driver. It seems that the monitor driver that comes with the Standard VGA adapter drivers works fine with my monitor but the AMD drivers must have monitor drivers that aren't compatible with my monitor.
      My Computer
    Quote Quote

  6. constantG
    Posts : 6
    Windows 7 Ultimate x64
    Thread Starter
       New #4

    For anyone reading this thread with a similar problem. The problem was that the monitor could display at 1024,768 at 60Hz with the Standard VGA Adapter drivers (MS) but not with the ATI drivers.

    I had to boot into low resolution 640,480 mode and change the resolution to 1024,768 at 70Hz to get the monitor to display using the ATI drivers.

    Weird.
    Thanks for all your help Slipstreem @ Micromart Forums
      My Computer
    Quote Quote

 

  Related Discussions
So I've been playing around with explorer.exe because I read that you can change the Windows Logo, and so I downloaded an .exe file that would do so. The browser did not say it was malicious so I did so. After that, the screen went completely blank and i could not access anything Here is what i...
Hi guys, Let me start off with the specs – this is a custom build: Windows 7 Home Premium 64-bit OS Gigabyte GAH61N-USB3 mobo Intel i5-2400 CPU 4GB Crucial Ballistix Sport DDR3 1333 RAM 1TB 5400RPM 2.5" HDD MSI N620GT-MD1GD3/LP GeForce GT 620 GPU Slot-loading CD/DVD±RW optical drive Dell...
Hi everyone! My parents have a windows 7 Asus pc (I believe home premium) and when started it goes to the black screen stating that it was shut down incorrectly and gives you the option of running startup repair or starting windows normally. When starting windows normally is chosen it appears to...
Blank screen after Windows logo
in BSOD Help and Support

When I went to turn on my laptop this morning and the startup after windows logo was super long. It ended up stopping at a blank screen so I decided to restart the computer manually and that did not solve the problem. I was given the option to do a system repair and so I did. That also failed...
I disabled the nforce on board drivers and installed the pny ones I have on cd still get blank screen
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 11:08.
Find Us