Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ATI Catalyst 9.9

03 Oct 2009   #21
breeZy

Windows 7 Ultimate 32bit
 
 

what do you guys mean just press f8? am i suppose to do something else after pressing f8? because if i can remember f8 just gives you some option to put in safe mode etc.

unless theres something i'm missing


My System SpecsSystem Spec
.
03 Oct 2009   #22
QuackPot

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by breeZy View Post
what do you guys mean just press f8? am i suppose to do something else after pressing f8? because if i can remember f8 just gives you some option to put in safe mode etc.

unless theres something i'm missing
Keep pressing it until you get a black screen with about 10 different options.
My System SpecsSystem Spec
04 Oct 2009   #23
breeZy

Windows 7 Ultimate 32bit
 
 

i can see but what option do i pick to solve this problem or it doesn't?
My System SpecsSystem Spec
.

05 Oct 2009   #24
QuackPot

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by breeZy View Post
i can see but what option do i pick to solve this problem or it doesn't?
The very bottom one saying start windows without driver signature or something like that.
My System SpecsSystem Spec
20 Oct 2009   #25
Orpheous

XP Pro/Vista Ultimate (64)/Windows 7 Ultimate Signature Edition(64)
 
 

I had the same problem with W7 64 bit and ATI 4870 running CCC 9.9
  • Click Start (Windows symbol)
  • type gpedit.msc into the search bar
  • navigate to: User Configuration, Administrative Templates, System, Driver Installation
  • Double click Code Signing For Device Drivers
  • Check the Enabled radio button
  • under Options, select Ignore in the drop down box
  • Reboot
  • Re-install CCC 9.9
My System SpecsSystem Spec
17 Dec 2009   #26
Zalasta

Windows 7 64-bit
 
 

I can't seem to fix this problem. I've tried all the things that's been discussed here, but it still won't work. @Orpheus: when i'm searching for gpedit.msc it doesn't find anything. I asked someone who did it and it worked and he said it would be in C:\Windows\System32\ so i looked there but there was no msc-files at all. Found one namned gpedit.dll though.

When i press f8 during the booting and all that it doesn't work either. Still goes back to the "welcome"-screen in CCC.

This problem is driving me crazy...
My System SpecsSystem Spec
20 Dec 2009   #27
Kadu2

Windows 7 home edition
 
 

I am also having the problem of returning to the welcome screen, any more advice anyone?
My System SpecsSystem Spec
21 Dec 2009   #28
Zalasta

Windows 7 64-bit
 
 
Solved it!

Everything worked fine for me after uninstalling all drivers then installing the new 9.12 suite (Drivers & Support | GAME.AMD.COM) and then installing the 9.9 catalyst control center!
My System SpecsSystem Spec
06 Jan 2010   #29
HardDrive

Windows 7
 
 

I have Win 7 and I had the same problem with the 1 inch border (underscan) and I tried everything here and it didn't work I read some where that Vista drivers work with win 7 so I did just that removed the latest win 7 drivers from ati and installed the latest Vista Drivers and now when I click on desktop and displays and right clicked on the little tv on the bottom left of the screen and clicked configure like previously mentioned it brought me to the home screen but now it works and I can click on scaling options and adjust underscan and overscan. Hope this helps
My System SpecsSystem Spec
07 Sep 2010   #30
prospero

Windows 7 Professional 64-bit SP1
 
 

Quote   Quote: Originally Posted by Blongs View Post
I had the same problem with the 1 inch border and you are correct it is a scaling problem. Go into CCC and click on "desktops and displays", There will be a small monitor in the lower left hand corner, click on the arrow over that display, click on configure, you will see a tab for "scaling options" that will let you adjust underscan and overscan. I set mine to zero and it solved the problem for me. Best of luck to ya but I do believe this setting will only be available if you are using a HDMI cable to your monitor.
I just downloaded the latest version of CCC and now the scaling option won't "fix"; I have to reset it every time I boot. I'm using an HDMI cable to the Dell 23" monitor. Any ideas? If not, how do I revert to the previous version of CCC?
My System SpecsSystem Spec
Reply

 ATI Catalyst 9.9




Thread Tools




Similar help and support threads
Thread Forum
amd catalyst 2.1
is there a tutorial on how to safely overclock a gpu? Im using a ati radeon hd4550 and trying to get the best gaming graphics possible safley ty for ur help:geek:
Graphic Cards
AMD Catalyst Help
I accidentally uninstalled AMD Catalyst when trying to update the graphics drivers and I cant seem to get the program back. I have the new HP Pavilion dv6t quad and it uses that program with the switchible graphics (GPU). I have downloaded the AMD Catalyst Software Suite and the installation for...
Graphic Cards
Catalyst 10.2 Problems
Hey guys, hope you can help me. I'm running Win 7 Prof. 32-bit on my desktop, and I recently update my ATI HD4800 display drivers to V10.2(latest version available on AMD website) I updayed the Controle Centre and the drivers. Its causing my screen resolution to change whenever it feels like...
Graphic Cards
ATI Catalyst 9.4 Is Out
Release Notes - http://www2.ati.com/relnotes/Catalyst_94_release_notes.pdf x86 Version - http://game.amd.com/us-en/drivers_catalyst.aspx?p=win7/windows-7-32bit x64 Version - Drivers & Tools | GAME.AMD.COM
Drivers
ATi Catalyst 9.1
Anyone try the newest ATi Cat 9.1 driver yet on Windows 7?
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:45.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App