Graphic Card is dying?

COMPUTIAC · 31 May 2013

The CPU-Z states you have Dual-Channel DDR3

Solarstarshines · 31 May 2013

Dual channel command rate 1T ? thought it was supposed to be 2T

that is what I ment http://www.hardwareheaven.com/hardwa...ate-1t-2t.html

Faladu · 31 May 2013

That setting varies either 1 or 2T and just a delay between actions and varies on RAM, if you handle 1T, it's better than 2T, overclocking the RAM can apparently make up a bit of the difference, but I'm for recommended stability myself.

Razor505 · 31 May 2013

I don't think I can overclock my RAM or CPU, because there is nothing in the BIOS that says I can, plus this is pre-built by Acer, and it costed my $500 at the time.

Solarstarshines · 31 May 2013

Razor505 said:

I don't think I can overclock my RAM or CPU, because there is nothing in the BIOS that says I can, plus this is pre-built by Acer, and it costed my $500 at the time.

What you can do is just buy a need MB and CPU that will work with what you have already if you plan to oc then you need to have a better PSU period but if your just doing the norm get a bundled package cpu and MB should cost you somewhere round 300.00 you can replace it all yourself