Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BIOS Settings for Radeon H5700 HAWK

08 Jul 2013   #1
GMS Group

Windows 7 Professional (x64) Service Pack 1 (build 7601)
BIOS Settings for Radeon H5700 HAWK

BIOS Settings for Radeon H5700 HAWK


I have a Gigabyte GA-H55M-USB3 MBoard ( )
and an ATI Radeon HD 5700 Hawk graphics card (

Looking at the BIOS settings I have a choice of 4 for Init Graphics Display
1. PCI
2. Onboard
2. PEG
3. PEG2

Which is the correct setting? It`s currently on PCI. (Would it even make a difference?)


My System SpecsSystem Spec
09 Jul 2013   #2

windows 7 home 64bit

Hi there ... ON-board would be set by Default .. Peg and Peg 2 is for PCI Express Graphics ... PCI must be the Card which you are using at present
My System SpecsSystem Spec

 BIOS Settings for Radeon H5700 HAWK

Thread Tools

Similar help and support threads
Thread Forum
I can't access BIOS settings because BIOS assumes Windows is resuming
Good evening! A week ago I reinstalled Windows 7 in EFI mode on my laptop, and now I've got this problem: whenever I turn on my computer after a shutdown, the BIOS says "System Resuming" instead of "Press F2 to enter settings". This makes impossible for me to access BIOS settings. Previously, my...
General Discussion
bios settings
lm having an issue with system cooling. long story short my CPU fan seems to drop occasionally in speed to 500rpm, lve never been able to get it to go full for some reason. and occasionally when lve booted its taken powering down once to get the fan to start moving. lve read about changing the...
PC Custom Builds and Overclocking
BIOS: Can access BIOS utility, but cannot change settings.
Hello: This is my first post here, so hi to everyone. I just got an ASUS X401a Notebook and I want to use a flash drive to boot from Linux. I need to change the sequence in the BIOS so that the flash drive is first choice to boot from. I have no problem accessing the BIOS utility, but it...
General Discussion
BIOS settings for HDD
I have a Seagate 1TB Sata and a DVD write Sata. Windows device manager has always reported these as SCSI (not a unique problem I gather). Only the odd program refuses to see the sata drives. All drivers up to date everything else runs ok. Running AMI BIOS under "Integrated Peripherals" I...
Hardware & Devices
Bios Settings !
Hello guys ! I have a " little " question,AGAIN :(.I'm using a Gigabyte GA-P35-DS3L (rev. 2.0 ) motherboard,and a WD SATA II HDD.I was curious witch settings should i change in my bios because my HDD shows up while i'm booting as IDE Channel Master 0...I'll put a mark " * " beside the settings...
My Bios Settings
Hi, MOBO, ASUS M3A78-EM, installed devices, 1 x sata 11 HD, 1 x floppy, 1x dvd rom, ( IDE), 1 x sata DVD/CD drive, 1 x sata front panel multi port hub. Iíve been trying to resolve some issues I have with boot times and I donít understand some of my bios settings, could someone advise me...
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 13:39.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App