2nd monitor screen is blank

Page 1 of 2 12 LastLast

  1. Posts : 8
    Windows 7 home premium 64 bit
       #1

    2nd monitor screen is blank


    Hello ,
    I recently bought a 2nd monitor and i was intending to have my old one as the 2nd monitor however it's not working properly. The PC detects a 2nd monitor and when i drag my mouse far left side the cursor disappears meaning it went to the 2nd monitor but the monitor is blank so any help would be appreciated.:)
      My Computer


  2. Posts : 8
    Windows 7 home premium 64 bit
    Thread Starter
       #2

    I've read the following thread 'Dual monitor problem - 2nd monitor is blank'. Both of my Monitors are using VGA adapter and are connected to the video card not the motherboard
    Last edited by Faris123; 01 Sep 2013 at 08:18.
      My Computer


  3. Posts : 457
    Microsoft Windows 10 Home Build 15036
       #3

    Hey Faris,

    Welcome to the forums.

    According to most pics I find of your vid card, you don't have 2 VGA ports on the card. You DO have two DVI plugs, and if that's what you're using, then we're good. New Egg Card Specs

    One thing is to be sure that the power supply your system uses is good enough to drive the card. 600watts should be fine, but you never know. Check and be sure that the card is seated correctly, and that your system is setup to handle it. Use your NVIDIA control panel to check the card and be sure that it sees two monitors, and that both are active. I'm sure there's more to check, but this is a start, anyhow.

    You may want to check to be sure the second monitor is powered up. I know it sounds stupid, but when you start your sys, it probably powers up your primary monitor by default. Check the power switch (and, I suppose, the power cable to the monitor) and be sure it's plugged in. I'm not saying that you're not smart enough to have done so earlier, but you never know what you may have missed when hooking things up.

    Good luck
    Last edited by PeaB4YouGo; 01 Sep 2013 at 07:48. Reason: Check one more thing
      My Computer


  4. Posts : 8
    Windows 7 home premium 64 bit
    Thread Starter
       #4

    Hey


    thanks for your reply my GTX 660(non TI) has 2 DVI plugs however the monitors i'am using uses VGA connector so i use a VGA adapter to plug them.

    I have checked my Nvidia control panel and it shows that the 2monitors are connected to the video card just fine.

    I'am positive that the 2nd monitor is powered up because whenever i press the menu button on the monitor i receive a message 'Test good' Therefore it's powered up.

    Anymore help would be appreciated :)
      My Computer


  5. Posts : 6,879
    Win 7 Ultimate x64
       #5

    The reason that it isn't working is that only one of the DVI ports supports VGA via adapter, the other is DVI/digital only.
      My Computer


  6. Posts : 8
    Windows 7 home premium 64 bit
    Thread Starter
       #6

    Aha isn't there a solution for it?
      My Computer


  7. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #7

    A DVI cable.
      My Computer


  8. Posts : 8
    Windows 7 home premium 64 bit
    Thread Starter
       #8

    Ok i'll get one and will see how it goes i'll mark it as solved if it works thanks for your response all

    Also if i get a DVI cable wouldn't it be impossible to connect it to the monitor since the monitor has VGA connector on it?
      My Computer


  9. Posts : 6,879
    Win 7 Ultimate x64
       #9

    Correct, a DVI cable won't work any better than the adapter you are using, as you would still need the adapter, only on the monitor end instead of the card end.

    The only solution in this case is short of a new monitor that has a DVI connection, is to use a DVI to VGA converter (totally different animal than an adapter). Only problem with that is that you can buy a new monitor for less than the converters sell for,

    DVI to VGA Converter - DVI VGA Video Format Converter | StarTech.com
      My Computer


  10. Posts : 8
    Windows 7 home premium 64 bit
    Thread Starter
       #10

    I see thanks for your reply looks like i wont be able to play on 2 monitors for a while

    Isn't there a way to tweak my video card or anything to have my 2nd monitor to work i'am really dying to play multi monitors
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:36.
Find Us