New
#1
Monitor Not detecting DVI
Greetings,
I have researched this topic for a few days and have found many simular problems. However none of which have helped me. So here it goes..
I recently replaced my heat sink with an aftermarket heat sink (same socket type and all)
I through everything back together made sure everything was plugged back in correctly and now my monitor does not boot with the computer. The orange standby light just stays orange. If I turn it off and then back on it says scanning and then a green arrow comes up next to DVI. Then the monitor goes to sleep. There are no beeps on boot-up, all the fans and lights work. I did notice the motherboard temp clock says "FF" not sure what that is.
So far I have done the following:
Reset monitor cables
Reset power on monitors
Re seated memory
Re seated video card
Tried a brand new video card
Did a hard boot down with the power chord out and holding down the power button for 30 seconds
none of these have worked. The monitors are fine I tried them on a different computer.
There was no short circuit that I am aware of I kept grounding myself to avoid this.
I am at wits end here and can't figure it out..
Windows 7 home premium
EVGA SLI X58 motherboard w/ Corei7 CPU
Nvidia Gforce GTX 275
800W power supply
Last edited by Redwing87; 14 Sep 2013 at 13:59. Reason: mistake