Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Z87 Sabertooth SLI Problem

03 May 2014   #1

Windows 10 Pro x64
Z87 Sabertooth SLI Problem

I have never tried SLI before but when I built my new computer I had two Gigabyte GTX550ti's from previous builds.
I installed them and finally got them working, not sure what I did but messed around in uefi and it worked.
Had problems with a couple of fans and ended up resetting UEFI and now I can't get them too work.
Monitor 1 is in slot 1 and is working.
Monitor 2 is in slot 2 and is not working properly.
Only one card shows in Device manager.
In Display fusion the monitor shows up (see attachment)but it is completely black.
I think the problem is that slot 2 is not running at X16 orX8.

Attached Thumbnails
Z87 Sabertooth SLI Problem-display.png  
My System SpecsSystem Spec
03 May 2014   #2

Windows 10 Pro x64

Tried another card inslot 2 and it did not work.
RMA time.
Will let you know what happens
My System SpecsSystem Spec

 Z87 Sabertooth SLI Problem

Thread Tools

Similar help and support threads
Thread Forum
Sabertooth Temperature Sensors. Where do you place them?
The Asus Sabertooth motherboard comes with three temperature sensors and I was wondering where people who have the board have placed theirs. Some research has shown that some users don't use them and others have all different locations. What is your opinion on placement?
Hardware & Devices
Memory for Z87 sabertooth/i1-4770k?
I can't seem to get the memory right for my update build (have changed my mind many times). What I want is; 16gig DDR3 2x8 gig OR 4x4gig. I want to purchase from HERE. Budget $200 to $300 AUD Can I use 2400 or 2133mhz? Do not want to manual overclock (mess with Voltages Etc.) Want to use...
PC Custom Builds and Overclocking
Install windows 8 on sabertooth 990fx R1
as above says is this possible
General Discussion
Sabertooth 990FX wont let me set ram to 1866
hello, having a bit of a problem, i have g skill sniper 1866 9-10-9-28 ram when i go into the BIOS it only allows me to go up to 1600, but the manual and board clearly says itll work with 1866 anybody know if im going to have to overclock? the site doesnt say i should need to. any help...
Hardware & Devices
Sabertooth x58 not detecting all 12gb of memory
I have sabertooth x58 and 6 sticks of 2gb corsair XMS3 DDR3 1600 MHz RAM 12GB (6x2GB) 8-8-8-24 model TR3X6G1600C8. I can not get 12gb to show in bios...only 8gb show up and I checked each stick one at a time....confimed that they all work.... Also I noticed that when I was checking each stick one...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:18.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App