Asus 22" Monitor wont display 1680x1050


  1. ardy01
    Posts : 3
    Windows 7 ultimate 32 bit
       New #1

    Asus 22" Monitor wont display 1680x1050


    Hi All - just joined.

    I just removed a NVIDIA GTX 260 and all software and now I cannot get my screen display correct using the blue VGA connector (removed the DVI as my computer does not support one).

    Where do I get an driver to support my Asus 22" monitor?

    Microsoft display does not offer this resolution. Been on ASUS site and had a look through several pages here, cant find a driver.
      My Computer
    Quote Quote

  3. alphanumeric
    Posts : 4,466
    Windows 10 Education 64 bit
       New #2

    It's not the monitor its a graphics driver issue. You need to go your motherboard manufacturers website and download the correct video or chip-set driver. Even then it might not support that resolution.
      My Computer
    Quote Quote

  4. ardy01
    Posts : 3
    Windows 7 ultimate 32 bit
    Thread Starter
       New #3

    AN: Thanks for that. Downloaded the graphics driver from AMD it needed Net4 from MS after about an hour doing this AMD comes up says no support for this card set.

    Bloody frustrating when all I want is to use my monitor correctly.
      My Computer
    Quote Quote

  6. alphanumeric
    Posts : 4,466
    Windows 10 Education 64 bit
       New #4

    You must have downloaded the wrong driver. What does it have for onboard graphics?
      My Computer
    Quote Quote

  7. ardy01
    Posts : 3
    Windows 7 ultimate 32 bit
    Thread Starter
       New #5

    AN: Thank you for all your help. Your links would have resolved my problem BUT I turned on the computer this morning and windows had downloaded nvidia and on restart all was fine.

    This problem is fixed.
      My Computer
    Quote Quote

  8. alphanumeric
    Posts : 4,466
    Windows 10 Education 64 bit
       New #6

    Ah, OK, um, if it has NVidia graphics, why were you trying to install AMD graphics drivers?
      My Computer
    Quote Quote

 

  Related Discussions
I moved about half a year ago and left my old dell xp desktop in the garage ever since. I just took it out to use it, But it wont show anything on the screen. I tried reseating the ram and cmos chip, and tried two 2 cords on two monitors, with flushing the remaining power by unplugging and pressing...
I recently brought a new pc and im haveing a problem with my screen and keybord not been dectected on first start it just stays black screen also my keybord wont light up i have tryed unpluging my hdmi cable and re plugging i have also changed the cable compleatly to a new cable still same problem...
After connecting my new hdmi cable the resolution has been off. It's currently at 1920 x 1080 but is slightly too large for my monitor. Its cutting all the icons pinned to the task bar in half. When I try to customize the resolution in the NVIDIA Control Panel it says the custom resolution is not...
Some backstory: just one month ago, I started to think of what will be the other use of our TV and it's HDMI cable. When I cleaned out my PC, I noticed that my card has an HDMI port so something came into my mind; and after 2 weeks, I decided to use my TV for a larger monitor and it works fine. In...
Reliability Monitor Wont Display Graph
in Performance & Maintenance

Im having a really tough to TS problem with the reliability monitor. For the last week, it no longer displays any data and the graph dosent render. It just display as blank with no data. Some things to note... 1. The RAC published and State data are being updated and published each day as...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 İ Designer Media Ltd
All times are GMT -5. The time now is 00:30.
Find Us