A little bit of help needed with my display ports.


  1. Posts : 2
    Windows 7 Home Premium x64
       #1

    A little bit of help needed with my display ports.


    Hey SF, to start out please dont just paste in a DVI-I to DVI-D and call it a day..
    http://www.avsupply.co.za/images/DVI-Chart.jpg Monitor is DVI-D Dual Link, PC is DVI-I Dual link.

    My situation is this: I want to get this monitor, three to be exact, I need to plug the DVI-D into my DVI-I port, then I need an HDMI to DVI adapter. I am using a GTX 760 and I am VERY limited on ports. The monitor has no HDMI either so thats why I need that adapter.

    Heres the monitor:
    Amazon.com: Acer G206HQL bd 19.5-Inch LED Back-Lit Widescreen Display: Computers & Accessories I am getting the 24 inch.

    And no i'm not looking for monitor opinions

    Anyway, yeah. I am pretty sure the monitor is DVI-D DUAL LINK, this is killing me, help me out guys.

    The next thing, is I need something to convert my HDMI signal on my card to DVI i can plug monitor into.




    And just to be sure im clear, I am not changing any signals with adapters on the monitor, I am changing my PCs signals with adapters to make it work WITH the monitors.


    Sorry if some stuff I said sounds stupid, im just a n00b.

    Thanks, Fantasy
      My Computer


  2. Posts : 5,656
    Windows 7 Ultimate x64 SP1
       #2

    You don't need Dual Link for that resolution (1920x1080 or 1200). Single Link will work alright. (1920 3D need Dual Link)

    DVI-I and DVI-D are the same as well, DVI-D is digital only, DVI-I is both digital and analog.
    And HDMI to DVI is just a simple converter as both specs use the same signaling, no active conversion needed.

    So single link DVI-to-DVI cable for 2 monitors and HDMI-to-DVI converter + DVI-to-DVI cable for 3rd (or HDMI cable + HDMI-to-DVI converter).

    Edit: Not sure about 1200 so deleted that bit.

    Edit 2: Wiki page
    Single-link DVI employs a single 165 MHz transmitter that supports resolutions up to 1920 × 1200 at 60 Hz. Dual-link DVI adds six additional pins (located in the center of the connector) for a second transmitter increasing the bandwidth and supporting resolutions up to 2560 × 1600 at 60 Hz
      My Computer


  3. Posts : 2
    Windows 7 Home Premium x64
    Thread Starter
       #3

    GokAy said:
    You don't need Dual Link for that resolution (1920x1080 or 1200). Single Link will work alright. (1920 3D need Dual Link)

    DVI-I and DVI-D are the same as well, DVI-D is digital only, DVI-I is both digital and analog.
    And HDMI to DVI is just a simple converter as both specs use the same signaling, no active conversion needed.

    So single link DVI-to-DVI cable for 2 monitors and HDMI-to-DVI converter + DVI-to-DVI cable for 3rd (or HDMI cable + HDMI-to-DVI converter).

    Edit: Not sure about 1200 so deleted that bit.

    Edit 2: Wiki page
    Single-link DVI employs a single 165 MHz transmitter that supports resolutions up to 1920 × 1200 at 60 Hz. Dual-link DVI adds six additional pins (located in the center of the connector) for a second transmitter increasing the bandwidth and supporting resolutions up to 2560 × 1600 at 60 Hz
    Well, you are right BUT the port on the monitor is DVI-D dual link and the plug is the same that goes in the computer. I'm buying 3 of the same monitor. So please no advice like I originally asked and if anyone has some good adapter for what I ask let me know.
      My Computer


  4. Posts : 5,656
    Windows 7 Ultimate x64 SP1
       #4

    You don't need to have the exact same DVI port/cable combo, as long as cable can plug in (for 1920x1080 single link is ok). I have a Samsung LED XL2370 monitor, which has a DVI-I Dual Link port but the cable that came with the box is DVI-D Single Link and had no issues back when I was using it with a GTX480.

    So, perhaps could you at least wait until you get your monitors? They are supposed to come with DVI cables. And check your pile of PC parts for a HDMI-to-DVI converter, as most graphic cards (and sometimes motherboards) come with one. Then only cable you will need to buy (if not have a spare in the house already) is an HDMI cable version 1.3+. HDMI 2 is latest and doesn't cost much higher than others.

    Or alternatively something like this - Amazon.com: Gefen DVI to HDMI Cable 6 feet Male-Male: Electronics

    And if yours will be like mine, your 3rd monitor (further away from the PC) will need a longer cable or an extension

    A little bit of help needed with my display ports.-dvi-plugs.jpg
    Taken from: CAT-5 Ethernet Cable Pinouts HDMI Firewire USB

    In any case, enjoy your new goodies
      My Computer


  5. Posts : 13,576
    Windows 10 Pro x64
       #5

    My GTX 980 Ti`s only have 1 DVI output so I use a Display Port to DVI adapter forr my other monitor/s, does your card have any dispaly port ports.

    As Gokay states, you don`t not need a dual link dvi cable, a single link will work fine.

    If you`re not going any higher then 1920 by 1080 then all you need is a single link cable.

    What does dual-link DVI actually mean? | FireUser Blog

    DVI: Single and dual link - Monitors - Tech Explained - HEXUS.net

    Mine HP DisplayPort to DVI Adapter Passive 481409-002 REV.F
    Attached Thumbnails Attached Thumbnails A little bit of help needed with my display ports.-41mxezbbaul._sy300_.jpg   A little bit of help needed with my display ports.-pci-bracket.jpg  
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:31.
Find Us