Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Replaced video cable, still no signal

24 Oct 2015   #11

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1

I suggest first using the ACER AL1906 and with the known good cable already attached to the other computer first. Make sure the monitor has no bent pins in the connector before hooking it to the known good cable and computer. The ACER splash screen is not dependent on the computer at all, that's built into the monitor.

My System SpecsSystem Spec

 Replaced video cable, still no signal

Thread Tools

Similar help and support threads
Thread Forum
No vidio signal with HDMI cable on Computer Reboot
I have an Acer H233H monitor that is capable of using either a DVI or HDMI cable, new computer has both outputs.. I am using the HDMI cable and when I reboot my computer i lose my video signal to my monitor. If I turn my monitor off and on the signal returns. My monitor is set to HDMI input, so I...
Graphic Cards
WMC does not see analog cable TV signal
I am running Windows 7 Home Premium, a new motherboard (Gigabyte GA-Z87X-UD$H) and two Hauppauge HVR2255 cards.One is set to receive analog cable directly (no set top box) and the other to receive OTA HD digital. I start WMC either as a part of the boot process, or after boot has completed.Then I...
Media Center
BSOD 0x116 (stop error) Replaced GPU, replaced RAM, replaced PSU
My monitor goes black and I am forced to reboot. After rebooting I get a blue screen prompt telling me that i've recovered from a BSOD. I've been monitoring them since October. In October, I RMA'd my graphics card. Oct 27. You can see that after I got a new GPU, my BSOD's halted... so...
BSOD Help and Support
RJ-45 Cable Signal Problems Til I Reboot?
I thought the rj-45 cable was bad so I tried another but same problem. When I plug in in to my WildBlue modem and Lan input on my pc I get the yellow triangle with a black exclamation mark in the triangle which is in the system tray. If I totally unplug either end of the cable I get the usual...
Network & Sharing
Check signal cable with new Samsung monitor
I purchased a new Samsung B2030 monitor today. I have a two year old or so HP Nc6230 laptop. I just installed Windows 7 Ultimate and I am getting the check signal cable from the new monitor. Now I understand this has to do with installing the latest software from ATI which is my video card...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:02.
Twitter Facebook Google+