Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Setting Screen Resolution to Max my Screen is not responding.

13 Dec 2016   #1
thenortonsetup

Windows 7 Ultimate x 64
 
 
Setting Screen Resolution to Max my Screen is not responding.

Hey Guys,
I was reading document on my PC, but content to the right was not readable, as it was hiding in edge of browser. So I thought it is happening because of my PC resolution. Than On main screen I did Right click and select option of screen resolution and selected max. And done it. After that my screen show error of "RESOLUTION OUT OF RANGE" than black blank screen. I thought in some second it will auto retrieve to last resolution setting. But no, now my PC is ON but i can't see anything except than black screen, just like it is off. But all monitor functions are working. Help me out with this. What should I do now?

Thankyou
thenortonsetup


My System SpecsSystem Spec
.
13 Dec 2016   #2
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Disconnect from your graphics card and plug into the motherboard port.

Uninstall the drivers for the 780 and start over.

You may or may not have to remove the card.

Unless someone comes up with a better idea.
My System SpecsSystem Spec
13 Dec 2016   #3
thenortonsetup

Windows 7 Ultimate x 64
 
 

I tried this but not work for me..
My System SpecsSystem Spec
.

13 Dec 2016   #4
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

When you hook it to the MB, you still don`t get a picture ?

That`s odd.
My System SpecsSystem Spec
13 Dec 2016   #5
thenortonsetup

Windows 7 Ultimate x 64
 
 

Maybe be because my friend tried to do something with BIOS settings.. He disabled something..
My System SpecsSystem Spec
13 Dec 2016   #6
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

He may have disabled the on board graphics. Just re enable it.

But usually when you switch back it switches automatically, but maybe not for you.
My System SpecsSystem Spec
13 Dec 2016   #7
thenortonsetup

Windows 7 Ultimate x 64
 
 

At that time BIOS windows can be seen. But after that setting, It is just black dead screen. I dno't know how to enable it.
My System SpecsSystem Spec
13 Dec 2016   #8
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Pull the battery or use the jumper pin if the MB has one, it should set it back to defaults and you should see something on the screen.
My System SpecsSystem Spec
13 Dec 2016   #9
thenortonsetup

Windows 7 Ultimate x 64
 
 

I pulled out every component of motherboard and assemble them again. Now i can access BIOS. And screen is working fine in safe mode. But when i switch to normal windows it is showing same resolution out of range and black screen than.
My System SpecsSystem Spec
13 Dec 2016   #10
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Now just a suggestion can you adjust the monitor res by the monitors own controls??

Now you also mention in the specs you don'y know what the machine is made up from? ie the manufacturer is not known. Now if you want some in depth info on your machine this might be handy.
Using HW Info
PART A:
You can test the volts on the PSU with HW Info HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT as a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE (sometimes the usual one for Gigabyte boards)
Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.
Limits +/-
12v = 11.4 12.6v
5v = 4.74 5.25v
3.3v = 3.135 3.465v
The Power good signal voltage at pin 8 on the 24 pin plug (grey cable) should be the same as the 5v rail reading/s
See this for the rail voltage info
PSUs 101: A Detailed Look Into Power Supplies (Section 2.)
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
PART B:
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.

PART B: is particularly handy for your purposes


Attached Thumbnails
Setting Screen Resolution to Max my Screen is not responding.-hw-info-devices.png  
My System SpecsSystem Spec
Reply

 Setting Screen Resolution to Max my Screen is not responding.




Thread Tools




Similar help and support threads
Thread Forum
Help setting the right aspect ratio and screen resolution.
Okay I just got my pc built with a nice graphics card and everything, and bam an issue occurs. I seem to have issues with finding the right resolution. I have a decent sized tv, its a bit old its like a mix between a tube and a flat screen weird actually. But anyways I only have two resolutions...
Graphic Cards
Changed Screen Resolution Setting and now I get VGA No Signal
So I'm currently fixing my graphics card drivers and I'm having some issues with my taskbar and desktop icons not showing up after installing it. But I remember this happening last re-install and what I did to fix it was to go into Screen Resolution and change something there. I dont remember too...
Graphic Cards
Setting Custom Screen Resolution?
I've been using my TV to play games on my desktop over HDMI for years, and I've always had a screen resolution that fit the TV display perfectly (1768x992). Recently, I purchased a new laptop for myself and have started using it more to game on, and I've been trying to hook it up to my TV over...
Graphic Cards
Screen Resolution, Out Of Range when playing games in full screen mode
Hey guys, i have a monitor with a native screen resolution of 1280x1024 , but windows is unable to detect it since my monitor is quite old and the driver i found on the official website is for windows xp only. now windows display this list of resolutions ...
Gaming
Problem setting my screen resolution of 1440X900
Hello. I have been having this problem of setting my resolution of 1440X900. I have a 19" Acer monitor and that resolution seemed to be perfect for my monitor but i just restarted my computer and that particular resolution was gone. I have already installed my graphic card software and tried to...
Graphic Cards
Screen Resolution keeps re-setting on sleep mode
I am running W7 64 bit with an ATI Radeeon HD 2600 HD Pro. \\i have the latest drivers installed but when the PC goes into sleep mode and I go to use it the screen resolution has defaulted to a low setting. I right click my mouse and select screen resolution to reset upon where the screen retains...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:36.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App