Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: HP DV6 switchable graphics won't install properly

31 Jul 2017   #1
Misphit

windows 7 Pro 64-bit
 
 
HP DV6 switchable graphics won't install properly

Hi there all, I have have been trying to resolve this problem for the past three days!

I have got a big problem with an HP Pavilion DV6-6c57ea laptop, the Dual graphics drivers won't install no matter what I do. Windows 7 has been freshly installed, I have installed the drivers from the website numerous times and in different orders, I've even tried changing the motherboard to a DV6-6156ea with AMD Radeon HD 6490M and still had the same problem. I've even tried using Driver Easy and it found a newer DV6-6c57ea driver for its AMD Radeon HD 7470M/Intel HD graphics and installed, but when I right click on Configure Switchable graphics and open the the AMD catalyst it shows the wrong options and not the correct screen to switch the graphics properly like this:
http://h30434.www3.hp.com/t5/image/s...v=mpbl-1&px=-1
After many google searches and trying what they said with no avail, I am literally pulling my hair now!
The strange thing is I had a similar laptop with the same hardware and it installed fine but not with the HP drivers (it just did the same as above) so I had to uninstall and use the one from Driver Easy and it installed and worked perfectly, but not this time it just comes up with that same thing when I try to configure switchable graphics.
All help is much appreciated.


My System SpecsSystem Spec
.
31 Jul 2017   #2
mrjimphelps

Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 7 Ultimate 32-bit (VMWare guest)
 
 

It is possible that the drivers on the Dell website are not the correct drivers. Check this post to see how to get the correct drivers -- use the VEN-DEV method first, before trying the Windows Update method.

Have you tried doing a factory rebuild on your computer? There will be an option on your HP computer for creating the factory rebuild disks. Be aware that with HP, you get only one shot at creating the disks. Proceed with extreme caution. However, the fact that you have changed to a different motherboard very likely means that the factory rebuild disks are no longer useful on your computer.
My System SpecsSystem Spec
Reply

 HP DV6 switchable graphics won't install properly




Thread Tools




Similar help and support threads
Thread Forum
Switchable Graphics problem
Hello, Recently I got a hard drive problem, then I changed my hard drive and everything was normal. I then installed windows 7 ultimate x64bit to the new hard drive. Then I started downloading my drives using HP site. I downloaded, but my graphics were bad, my games i played with 60 fps started...
Graphic Cards
Switchable Graphics - Device Not Recognized
Hello, See my system specs for my laptop make and model. Disclaimer: I did get a new mobo over Christmas break, but it was matching identical to the original I'm not sure why the AMD GPU is not wanting to recognize or install. My laptop has the bridged processor with two GPUs; the Intel...
Graphic Cards
Updating graphics drivers on switchable graphics
HP DV6 6121tx AMD HD6770M Windows 7 64bit I just reinstalled Windows and I want to update my graphics drivers to the latest ones (13.1). I'm runnning Dynamic mode. So at first I installed the latest HP provided AMD Display drivers from HP's website AMD High-Definition Graphics Driver HP...
Graphic Cards
Switchable Graphics Card
Hi everybody, got a quick question. I have two graphics cards on my Acer Aspire laptop, an ati 5650m and a Intel HD graphics card for low power use that I can switch too. I was wondering, if I'm just internet browsing or playing a low end game like counter strike, should I switch to my Intel HD so...
Graphic Cards
Switchable graphics notification
Hi I am developing an application for a system having following switchable graphic cards: AMD M880G with ATI Radeon HD4225 + ATI Radeon HD 5430 and Windows 7 OS Is there any notification that I could get when the card is being switched. I can see that the switching is not allowed when...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:19.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App