Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: gtx660 error 43 -nvideo console wont start, have image on screen

21 Mar 2019   #1
mtraven

win 7 x64 home pro
 
 
gtx660 error 43 -nvideo console wont start, have image on screen

A little backstory.....I had been running the on board video card fine, I'm not into gaming, so my demands are minimal, but I was given a free LG 29um57 - ultra widescreen. I have frequently run multiple monitors, so I thought I try to get it all out of this monitor. So I found a used gtx670 (seems like a good, albeit older card)

When I run a driver install (tried many version), the install runs (seemingly to completion) ask to restart to complete installation and then start back up with geforce experience saying there is no driver and error 43 from device manager. Also, nvidia console crashes when I try to open it from control panel.

I have been reading about this for about 18 hours now and have tried various combinations of installs, removal methods, ect. i have even wiped the system and started with the gpu drives before anything else, same results.

The odd part is, I and running on that screen with that card right now....with the generic drivers @ 1080p...the resolution is there, but any motion is terrible & doesn't fill out the screen...but it is functioning on some level, can I take this to mean the used card I bought is physically ok?


Some users reported problems with power connections, I should mention I did have to swap out the PS for a bigger one with the (2) 6pin connectors. So its kinda untested. It seems to run fine and each of the yellow lines reads 12V as it should, but I have no way to know if its getting all the current it needs.


Someone suggested a bad pci controller in the cpu, how might I go about testing this? I have a very basic video card I could try in there, if it works, can I cross bad cpu off my troubleshooting list?



So I now have about 18 hours into what should have been a 1-2 hour video card install, I am desperate and willing to try just about anything. thanks for your help.


My System SpecsSystem Spec
.
22 Mar 2019   #2
mtraven

win 7 x64 home pro
 
 

took a while for my post to show up on here. My main focus is now on "error43 : windows has stopped the device because it reported errors"


I need to know how to find out what those errors are, hoping that will tell me if the hardware is shot, or if I have some sort of system conflict
My System SpecsSystem Spec
24 Mar 2019   #3
mtraven

win 7 x64 home pro
 
 

moderator: you may delete this thread if you wish. This waited 24hours for my messages to post is ridiculous. I understood with the creation of the new thread and me being a new user, but just a simple reply has to be approved? That's just silly.
My System SpecsSystem Spec
.

24 Mar 2019   #4
wither 2

Windows 7 Pro SP1 64 bit
 
 

Do you have the monitor connected to the graphics card? Is the cable connected to the correct connection (VGA vs HDMI) on the card and the monitor? Is the monitor set to use say DVI vice VGA?
My System SpecsSystem Spec
27 Mar 2019   #5
Belgarionbg

Windows 7 Professional x64 sp1
 
 

The last good driver for gtx 660 (at least for me) is 350.12-desktop-win8-win7-winvista-64bit-international-whql. With it the card runs stable.
My System SpecsSystem Spec
Reply

 gtx660 error 43 -nvideo console wont start, have image on screen




Thread Tools




Similar help and support threads
Thread Forum
Black screen+Mouse active+Windows wont start
After Windows start up all I can see is a black screen and an active mouse cursor. I am able to get task manager to open and even to activate Chrome (from task manager). Other things doesn't work (e.g. can't open folders). I've checked the "shell" value in regedit (it's "explorer.exe") but I...
General Discussion
PC wont start, blank screen (no bios, etc)
I opened the PC case, I can see that everything is ok, the fans are running, the graphic card fan is running, there is a green light on the motherboard which I assume is ok. But it shows a blank screen on the moniter, plus the keyboard doesnt power up. The mointor isnt the problem as I've had it...
Hardware & Devices
Laptop wont start past windows loading screen
I was browsing the web and my laptop froze. I held the powe button to turn it off and now when i turn it on, it only goes to the windows logo and no farther. If i leave it alone, after 20 minutes it goes to a black screen with a cursor. I have tried starting in safemode as well and it only loads...
General Discussion
No beep on start up wont go past grey screen.
My computer as started to stay on grey screen and when i shut it down and start again it goes into repair mode then tells me it cant repair and is shutting down after shutdown i start again and it slowly comes back to life,i have also noticed no beep at start up,ive tried f8 but cant find safe...
BSOD Help and Support
enable sli wont show up in control console
hello all, i have an asus a8n-sli with 2 8800gt zotac , however 1 has 512 mb of memory and the other has a gig.. i have a 3200+ athlon 64 that im running windows 7 ultimate 32 bit... with a gig of ram.. windows runs good i have the updated nvidea drivers, both of my cards show up in device manager...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:53.
Twitter Facebook