Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't get into Windows after overclocking my screen

1 Week Ago   #1
Megadethfan

Windows 7 Professional 64-Bit
 
 
Can't get into Windows after overclocking my screen

Hello,


I used cru-1.4.2 to overclock my screen from [email protected] Hertz to [email protected] today, which worked just fine without any issue, it really looked great especially when I play a FPS game. Right after that I tried to overclock my screen even further using a lower resolution (i used 1280x720) and that worked until I got to 79, right after I tried 80 it didn't go back to my desktop but was stuck in the "Input out of range" error message and I can't really boot into Windows 7 unless I use safe mode.

That means, somewhere Windows must have saved these settings and I don't know where, I tried to look it up on google but i found nothing there(I'm in Germany so I don't know if it's any different somewhere else) so I decided to register here to explain my problem in more detail. Is it possible to reset these Screen settings somewhere while using safe mode? I know it uses another setting for safe mode which is just my standard 60 Hertz but I know that in normal mode it uses now a higher Hertz setting and it just wouldn't revert these settings back to normal no matter how long I wait in front of my monitor displaying the Input out of range message.


Thanks for reading and if you can help me with that without having to reinstall my entire system(and if I made grammatical or spelling mistakes, please forgive me, because I'm actually German and I didn't want to write everything just with Google Translate and i've been learning english for only a year at this point)
My System SpecsSystem Spec
.
1 Week Ago   #2
F22 Simpilot

Windows 7 Ultimate x64
 
 

Safe mode may allow you to go back in and revert your screen refresh rate back to native. But it depends on how this "overclock" program works. If it's via a DLL then safe mode may work. Or simply try removing the whole damn "overclock" program via safe mode. And when I say safe mode, I don't mean use safe mode with networking or other options. You want the first safe mode.

If that doesn't work then you can try to initialize a SFC /scannow via boot up. I can explain how that's done latter.

Never change your native monitor refresh rate. It has that rate for a reason. Overclocking it will have ill effects as you have now discovered. And if you chose to overclock a CPU, never use software to do so. Always do it via the BIOS.
My System SpecsSystem Spec
1 Week Ago   #3
Megadethfan

Windows 7 Professional 64-Bit
 
 
Hey

Hey, thank you for your reply very much.


I was able to solve the problem using the SFC method you suggested trying to me after I looked it up on a different Computer I still had and I was able to revert it back to 75 Hertz. The higher refresh rate is important to me because I play a lot of FPS games like Half-Life Deathmatch or Quake Deathmatch and I got that PC 3 years ago and before that I had a very old PC which could only support games like this(the newest game I could run on it was Minecraft) and I had a old CRT screen which could display more frames than my current screen can do and I just wanted to change that and now it feels like i'm playing games on my old CRT monitor and it just feels awesome.


I won't set my monitor back to 60 Hertz though, unless I experience any problems with 75 Hertz, then I will change my mind, but thank you for reading and helping, i'm not much of a pro when it comes to PCs to be honest but i'm interested in this subject very much. 80 Hertz is obviously just too much I guess!


Don't worry about my CPU, I'm not planning on overclocking any of my Hardware except for my screen which is important to me because I'm playing a lot of classic FPS games and I just can't afford a new screen to be honest.


I also didn't have to reinstall Windows so thanks a lot, that really saved me up a whole lot of work and problems because my internet is crap so I would have to download about 20 games again...
My System SpecsSystem Spec
.

1 Week Ago   #4
F22 Simpilot

Windows 7 Ultimate x64
 
 

Glad to hear. Can you do me a favor and mark this thread solved and click the scales icon here and give me some post love? I seldom get any. LOL
My System SpecsSystem Spec
Reply

Thread Tools




Similar help and support threads
Thread Forum
Windows Aero Disable's itself When Overclocking
Hello ! I have the following problem - when I overclock my CPU w/ AMD OverDrive from 3.6 to 3.8 / 4.0 ,Windows Aero shuts down ! I really like Aero,but I like when my CPU runs at 3.8/4.0 GHz aswell...I troubleshooted the Aero issue,it didn't fix it,I also typed in the ''net stop / start uxsms"...
PC Custom Builds and Overclocking
Windows 8 banned by world’s top benchmarking and overclocking site
Source
News
Overclocking and... Windows 8?
Hello SF members. I have one short question. How about overclocking on Windows8 ? Is there anyone who tried this, is all programs compatible (like SpeedFan, CoreTemp, RealTemp, IntelBurnTest, Prime95, etc...) ? Is there some problems ? I didn't found OC forums on EightForums so I don't...
PC Custom Builds and Overclocking
Overclocking not working in windows but works on bios startup.
Ok I have a Asus M4A88TD-V EVO/USB3 Motherboard and it has a Turbo Key 2 switch on it that automatically overclocks the CPU. And a AMD Phenom 2 X6 Black Edition 1055T Processor 2.80GHz Now here's my problem after activating it, on system startup it says my CPU is 3.24 GHz :D but when Windows...
PC Custom Builds and Overclocking
How To: Overclocking Your AMD Processor : Introduction: The Basics Of Overclocking
http://media.bestofmicro.com/CPU-AMD-Overclocking,9-J-180487-1.jpg http://media.bestofmicro.com/CPU-AMD-Overclocking,9-K-180488-1.jpg Tom’s Hardware readers know all about overclocking, of course. In fact, many processor and graphics card reviews would be deemed incomplete without coverage of...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:02.
Twitter Facebook