Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Change of BIOS

04 Dec 2009   #11
torrentg

7600.20510 x86
 
 

Post a crash dump here if you have had any of them and I can look at your other drivers:

https://www.sevenforums.com/crash-loc...d-problem.html


My System SpecsSystem Spec
.
04 Dec 2009   #12
EpicThorn

Windows 7 Ultimate 64 Bit
 
 

There is no dumpfile as it does not bluescreen, only flashes black and gives the offending message
My System SpecsSystem Spec
04 Dec 2009   #13
EpicThorn

Windows 7 Ultimate 64 Bit
 
 

I think I found them, give me a sec
My System SpecsSystem Spec
.

04 Dec 2009   #14
torrentg

7600.20510 x86
 
 

Amongst many possible causes, could also mean it's a failed card itself.

There have been people that RMAed the card with this and done nothing else. Put in a replacement, installed latest driver as always, and issue fixed.

If the card is out of RMA, you could try to replace the capacitors on the card if you're good at soldering. Get low esr type to replace, with same ratings as originals.
My System SpecsSystem Spec
04 Dec 2009   #15
EpicThorn

Windows 7 Ultimate 64 Bit
 
 

Here you go


Attached Files
File Type: zip WD-20091205-0025-02.zip (54.4 KB, 7 views)
My System SpecsSystem Spec
04 Dec 2009   #16
EpicThorn

Windows 7 Ultimate 64 Bit
 
 

The card is was purchased in last August, I just dont like the idea of waiting for tmy card to come back to me :-(
My System SpecsSystem Spec
04 Dec 2009   #17
torrentg

7600.20510 x86
 
 

Either uninstall the utilities that installed these drivers or update the utility and/or drivers themselves. Point is, get these versions off the system or get them updated to newest possible:

ASACPI ASACPI.sys Sun Mar 27 22:30:36 2005
RTCore64 RTCore64.sys Wed May 25 02:39:12 2005

Uninstall GPU-Z completely, for now at least.
My System SpecsSystem Spec
04 Dec 2009   #18
EpicThorn

Windows 7 Ultimate 64 Bit
 
 

Ok will give it a go now. Thanks mate
*fyi: GPU-Z has been installed after the problems occured
My System SpecsSystem Spec
04 Dec 2009   #19
EpicThorn

Windows 7 Ultimate 64 Bit
 
 

Alright, all cleared, let's see how it goes
My System SpecsSystem Spec
04 Dec 2009   #20
torrentg

7600.20510 x86
 
 

Yes. That may actually do what's needed. Good luck.
My System SpecsSystem Spec
Reply

 Change of BIOS




Thread Tools




Similar help and support threads
Thread Forum
Bios Language change?
I live in the UK and want to buy a Lenovo Thinkpad Tablet from Germany. The site and product spec is in German so I assume that the BIOS and Windows 7 will also be in German. Can the bios and Windows be changed to English? Ian
Installation & Setup
Windows 7 Stuck At BIOS Cannot Enter BIOS or Change Boot Media
My laptop has no problem before. Recently I try to install Windows XP. First attempt fail, so I change SATA at BIOS from AHCI to Compatible, success. However the partition that I want to install*Windows XP to is not available.* So just to test I choose my Windows 7 partition. Since it want to...
General Discussion
bios voltage change
i had 4gb or ram but then i added another 4 to make 8gb or ram, but i am getting bsod. how do i change the voltage to match the ram?
Hardware & Devices
BIOS: Can access BIOS utility, but cannot change settings.
Hello: This is my first post here, so hi to everyone. I just got an ASUS X401a Notebook and I want to use a flash drive to boot from Linux. I need to change the sequence in the BIOS so that the flash drive is first choice to boot from. I have no problem accessing the BIOS utility, but it...
General Discussion
AMI BIOS, should I change?
Hello I've been thinking about this for some time. I've pretty much always used AMI BIOS, simply because I've gotten used to it. However, I'm starting to read quite a few negative trends about it - that it's particularly slow, and messy (well, yeah, it's quite messed up) etc. I'm running...
Drivers
where can i change the bios setting ?
Hello, i try to find in my award bios acer, the cpu line to active the hyper-v. the only think i've found for cpu is cup ==> amd k8 cool & quiet control when i use tha amd hyper-v check i've got that result http://img10.imageshack.us/img10/8176/hyperv.jpg So, this test is really ok for the...
Virtualization


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:58.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App