Upgrade to Windows 7-Nividia 7600 GS not recognized

Page 3 of 4 FirstFirst 1234 LastLast

  1. sonikdreem
    Posts : 22
    Windows 7
    Thread Starter
       New #21

    Ok, took me awhile but here you go:

    PCI Input Device:

    PCI\VEN_1102&DEV_7003&SUBSYS_00401102&REV_04
    PCI\VEN_1102&DEV_7003&SUBSYS_00401102
    PCI\VEN_1102&DEV_7003&CC_098000
    PCI\VEN_1102&DEV_7003&CC_0980

    PCI Serial Port:

    PCI\VEN_8086&DEV_2997&SUBSYS_5058107B&REV_02
    PCI\VEN_8086&DEV_2997&SUBSYS_5058107B
    PCI\VEN_8086&DEV_2997&CC_070002
    PCI\VEN_8086&DEV_2997&CC_0700

    PCI Simple Communications Controller:

    PCI\VEN_8086&DEV_2994&SUBSYS_5058107B&REV_02
    PCI\VEN_8086&DEV_2994&SUBSYS_5058107B
    PCI\VEN_8086&DEV_2994&CC_078000
    PCI\VEN_8086&DEV_2994&CC_0780
      My Computer
    Quote Quote

  3. sonikdreem
    Posts : 22
    Windows 7
    Thread Starter
       New #22

    I believe the input device is my Creative Soundblaster 2ZS gamport which does not seem to be supported by windows 7, so that is not a problem. I think the serial port is an Intel Active Management Technology something or other...not sure about the communications controller...or maybe I have that backwards...either way, I do not think any of these are my Nvidia card...now what?
      My Computer
    Quote Quote

  4. Zidane24
    Posts : 5,807
    Windows 7 Home Premium x64 - Mac OS X 10.6.4 x64
       New #23

    The first set is your game port indeed

    The second is an intel serial port

    The third is an intel management console...

    Can you click the arrow beside Display Adapters and tell me what it lists?
      My Computer
    Quote Quote

  6. sonikdreem
    Posts : 22
    Windows 7
    Thread Starter
       New #24

    It lists My Intel Chipset Q965/963 express now after re-installing Windows 7...clean install.
      My Computer
    Quote Quote

  7. Zidane24
    Posts : 5,807
    Windows 7 Home Premium x64 - Mac OS X 10.6.4 x64
       New #25

    sonikdreem said:
    It lists My Intel Chipset Q965/963 express now after re-installing Windows 7...clean install.
    Can you open up the desktop...remove the GFX card...plug it back in and boot back to Windows?

    The fact that Vista doesn't see it anymore is not promising
      My Computer
    Quote Quote

  8. sonikdreem
    Posts : 22
    Windows 7
    Thread Starter
       New #26

    I tried that...no change. Again it was strange, the other day after fighting with this for hours, I left, came back and the card was showing in device manager, I updated the latest drivers from Windows Update and the monitor automatically switched to DVI, then I tried to run a game and the picture went black...no signal. I had to reboot and the situation went right back to where we are now...do you think the upgrade fried my card somehow?
      My Computer
    Quote Quote

  10. Adrian
    Posts : 1,419
    Windows 7 7600 1 X64
       New #27

    sonikdreem said:
    I tried that...no change. Again it was strange, the other day after fighting with this for hours, I left, came back and the card was showing in device manager, I updated the latest drivers from Windows Update and the monitor automatically switched to DVI, then I tried to run a game and the picture went black...no signal. I had to reboot and the situation went right back to where we are now...do you think the upgrade fried my card somehow?
    I don't think the update fried your card, do you have a vga option. If you do turn off the monitor, connect to vga and then reboot and turn the monitor on.
      My Computer
    Quote Quote

  11. sonikdreem
    Posts : 22
    Windows 7
    Thread Starter
       New #28

    Adrian said:
    sonikdreem said:
    I tried that...no change. Again it was strange, the other day after fighting with this for hours, I left, came back and the card was showing in device manager, I updated the latest drivers from Windows Update and the monitor automatically switched to DVI, then I tried to run a game and the picture went black...no signal. I had to reboot and the situation went right back to where we are now...do you think the upgrade fried my card somehow?
    I don't think the update fried your card, do you have a vga option. If you do turn off the monitor, connect to vga and then reboot and turn the monitor on.

    Yes, of course, since my Nvidia card only has dvi outputs, the only waay I can get a signal is by connecting to the VGA input from my onboard chipset.
      My Computer
    Quote Quote

  12. skunksmash
    Posts : 2,588
    SEVEN x64
       New #29

    have you reseated the card AFTER the w7 install...??

    sometimes the new OS fails to detect existing H/W, just pull it out & put it back, see if the OS is able to detect it. :)
      My Computer
    Quote Quote

  13. sonikdreem
    Posts : 22
    Windows 7
    Thread Starter
       New #30

    Just out of curiosity...is this a problem? And how do I fix it?
    Attached Thumbnails Attached Thumbnails Upgrade to Windows 7-Nividia 7600 GS not recognized-intel-amt.png  
      My Computer
    Quote Quote

 
Page 3 of 4 FirstFirst 1234 LastLast

  Related Discussions
Hello all, Question regarding upgrading RAM for my laptop. This is my setup: - Toshiba laptop L755-1D5 - Intel Core i7-2670 - 4 gig ram - Windows Home Premium 64 Bit
I've purchased a used Dell Precision 490 'born' June 2006 and 'driven only on Sundays.' The seller upgraded it for me from XP to 7 before shipping. (The genuine Win7 DVD was sent along with it.) The CD-ROM (TSSTcorp CD-RW TS-H292C ATA Device) is not recognized. The DVD drive works fine. The seller...
My HP dv6735en with above graphics cards just vanished after upgrading from vista to win 7. In device manager the only listing under graphics is the VGA card (even screen saver shows insufficient graphics error) I tried searching new hardware no luck Please help friends
Very frustrated :cry: Bought an Windows 7 home premium upgrade disc for my Vista home premium pc, duly went and downloaded the upgrade advisor program before opening the package and it told me that my computer was a-ok to run windows 7 and upgrade, so I opened the package and put the dvd in my...
I've been searching on the forms for a bit now, and am not sure if I have the answer that I'm looking for, so I wanted to post this question to everyone out there. I am currently running build 7600 of Windows 7, I did a clean install without formatting the drive over windows vista premium 64bit...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 17:52.
Find Us