New
#1
Trying to Solve problem
I am trying to solve my problem, i posted awhile back about my 5850 not performing to my standards and it always saying driver failed to respond and has recovered, Well now it has been just crashing a lot more with the different colored lines running vertical and stays on that screen. I ran prime 95 for 6 minutes and this is the outcome of worker #1
[Feb 13 11:33] Worker starting
[Feb 13 11:33] Setting affinity to run worker on logical CPU #0
[Feb 13 11:33] Beginning a continuous self-test to check your computer.
[Feb 13 11:33] Please read stress.txt. Choose Test/Stop to end this test.
[Feb 13 11:33] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Feb 13 11:35] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Feb 13 11:36] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Feb 13 11:37] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Feb 13 11:37] Hardware failure detected, consult stress.txt file.
[Feb 13 11:37] Torture Test completed 2 tests in 4 minutes - 1 errors, 0 warnings.
[Feb 13 11:37] Worker stopped.
[Feb 13 11:33] Worker starting
[Feb 13 11:33] Setting affinity to run worker on logical CPU #2
[Feb 13 11:33] Beginning a continuous self-test to check your computer.
[Feb 13 11:33] Please read stress.txt. Choose Test/Stop to end this test.
[Feb 13 11:33] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Feb 13 11:35] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Feb 13 11:36] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Feb 13 11:38] Test 4, 4000 Lucas-Lehmer iterations of M19174369 using FFT length 1024K.
[Feb 13 11:39] Test 5, 4000 Lucas-Lehmer iterations of M18874369 using FFT length 1024K.
[Feb 13 11:39] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Feb 13 11:39] Hardware failure detected, consult stress.txt file.
[Feb 13 11:39] Torture Test completed 4 tests in 5 minutes - 1 errors, 0 warnings.
[Feb 13 11:39] Worker stopped.
[Feb 13 11:33] Worker starting
[Feb 13 11:33] Setting affinity to run worker on logical CPU #3
[Feb 13 11:33] Beginning a continuous self-test to check your computer.
[Feb 13 11:33] Please read stress.txt. Choose Test/Stop to end this test.
[Feb 13 11:33] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Feb 13 11:35] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Feb 13 11:36] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Feb 13 11:38] Test 4, 4000 Lucas-Lehmer iterations of M19174369 using FFT length 1024K.
[Feb 13 11:39] Test 5, 4000 Lucas-Lehmer iterations of M18874369 using FFT length 1024K.
[Feb 13 11:39] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Feb 13 11:39] Hardware failure detected, consult stress.txt file.
[Feb 13 11:39] Torture Test completed 4 tests in 5 minutes - 1 errors, 0 warnings.
[Feb 13 11:39] Worker stopped.
If i knew what this meant i wouldnt post here, so i am just curious to what you guys think. I have nothing overclocked
But worker #2 continued and continued