X64 Hangs on install and boot.


  1. jvioncek
    Posts : 2
    Windows 7 x64
       New #1

    X64 Hangs on install and boot.


    Windows 7 hangs on install when I have the HIS AIW HD card installed at the starting windows screen. I formatted and installed XP, everything was fine, so I wiped and did a clean install of Win7 X64, hung again. Removed the AIW HD and setup completed and I got into windows. Re-installed the AIW HD and again, hangs at the starting windows screen. I have tried every bios setting regarding the onboard graphics and still nothing.
      My Computer
    Quote Quote

  3. theog
    Posts : 11,408
    ME/XP/Vista/Win7
       New #2

    Check your ram.

    Memory Diagnostics Tool

    Memtest86+ - Advanced Memory Diagnostic Tool

    Check your HD.

    SFC /SCANNOW Command - System File Checker

    Check with a hard drive diagnostic tools.

    Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
      My Computer
    Quote Quote

  4. jvioncek
    Posts : 2
    Windows 7 x64
    Thread Starter
       New #3

    The HD is brand new, hence the fresh install, the old HD crapped out. The last time I installed Windows 7 I upgraded from Vista and everything was fine. I'm considering installing Vista and upgrading to Windows 7 once I have the card working in Vista. Suggestions?
      My Computer
    Quote Quote

  6. theog
    Posts : 11,408
    ME/XP/Vista/Win7
       New #4

    Take a look at these posts:

    https://www.sevenforums.com/installat...-problems.html
    Tutorial quick reference list for Installing Windows 7
    Questions to use for help with Installation Issues
    Clean Install Windows 7
    USB Windows 7 Installation Key Drive - Create
      My Computer
    Quote Quote

 

  Related Discussions
Let me first address a few things: - I have read extensively on this topic, using guides such as this to determine whether or not I have bootable media for UEFI, which I do. - I have both an original, unused Windows 7 Pro w/ SP1 x64 install DVD, connected through the USB 2.0 external DVD...
**** This issue has been resolved **** **** Look at Page 4, posts 4 and 5 **** **** You need to enable Legacy MBR by Enabling Launch CSM in the EFI Setup **** Hello all, This is my first post. I am a Windows 7 user and now (against my will) Windows 8. I bought an ASUS N76 laptop...
Hi all, My first post here. I never new there was such a forum! :) Good health and happiness to everyone! Your expert thoughts appreciated please? My system works OK with a Crucial MX4 128G SSD. So i thinks I will upgrade to a bigger SSD - a new MX100 256G and use the MX4 elsewhere. ...
Hello. I am a repair tech so I usually can figure out the cause of weird issues, but I am currently stumped. I have a custom built machine that has windows 7 pro 32bit installed. Things were going quite nice until a multi card reader (some roswell version) crapped out. No problem, I'll just...
OK, I had the issue that several people have had with windows hanging at the "Starting Windows" Screen. I discovered that disabling the USB 2.0 Controller in BIOS allowed me to finish the install, and boot into windows normally. I re-enabled the controller and booting into windows hangs at the...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 08:39.
Find Us