windows 7 ultimate can't detect nvidia 9600 gt card

Page 2 of 5 FirstFirst 1234 ... LastLast

  1. Posts : 33
    windows 7 ultimate
    Thread Starter
       #11

    nekkidtruth said:
    Have you checked the Device Manager to see if Windows installed the default drivers? If Windows installed it's own drivers it can interfere with nVidia's version of the graphics.

    Also, I'm not aware of a 9600GT available in Notebooks but it would be good if you could clarify that this in fact a desktop machine as notebook's will not let you install drivers by regular means.

    in device manager it shows "SVGA display adaptor."..its desktop.
      My Computer


  2. Posts : 1,241
    Windows 7 Profesional x86, Mac OS X 10.6 Snow Leopard
       #12

    Try checking for registery errors. I'm pretty certain it's got nothing to do with this but it can't hurt.

    Oli

    EDIT: This just came to me all of a sudden. Try installing Nvidia System tools (http://www.nvidia.com/object/nvidia_...ools_6.03.html) and see if that helps, you never know; you might get lucky
      My Computer


  3. Posts : 33
    windows 7 ultimate
    Thread Starter
       #13

    ctaaraa said:
    osholt said:
    Assuming this is a desktop computer, have you checked the physical connection to the graphics card in the machine?
    Please can you tell me what your previous OS was?

    Oli

    EDIT: The windows 7 drivers for your GPU can be found at Drivers - Download NVIDIA Drivers.

    yah i have checked.and in the boot menu it shows "NVIDIA 9600 GT 1024 card."
    it was 32-bit xp service pack-3.
    thanks for your time
      My Computer


  4. Posts : 1,705
    Windows 7 Ultimate x64 ®™
       #14

    Have you tried a modded inf?
      My Computer


  5. Posts : 33
    windows 7 ultimate
    Thread Starter
       #15

    FZ21Z said:
    FZ21Z said:
    Hi.

    If you fill THESE in it will be easier for us to diagnose. You may need to use a modded INF.
    Check the link in my signature.
    i have tried with several driver checkers and robots but none of these detect my graphic card.
    are there any specific requirements for being detected i w7-64 bit apart from xp.

    are there any settings to be made in BIOS or BOot menu.


    waiting
      My Computer


  6. Posts : 33
    windows 7 ultimate
    Thread Starter
       #16

    FZ21Z said:
    Have you tried a modded inf?
    yah i downloaded it and did the same way as was in your post but.the result was same...
      My Computer


  7. Posts : 1,705
    Windows 7 Ultimate x64 ®™
       #17

    ctaaraa said:
    yah i downloaded it and did the same way as was in your post but.the result was same...
    If you've used a modded inf and driver from laptopvideo2go and it still doesn't work, I've no idea.
      My Computer


  8. Posts : 1,241
    Windows 7 Profesional x86, Mac OS X 10.6 Snow Leopard
       #18

    Do you have another GPU you could swap in? See if it recognises that.

    Oli
      My Computer


  9. Posts : 163
    Windows 7 Home Premium (64-bit) SP1 RTM
       #19

    There must be something wrong on the hardware side. Windows 7 should have Microsoft's native drivers for that card. They should have installed during Win7 installation. You may need to reseat the card and check the pci-e power cable that goes from the PSU to the end of the card is plugged in.

    Are you still using the SMPS SERIES PRO 380W PSU?
      My Computer


  10. Posts : 33
    windows 7 ultimate
    Thread Starter
       #20

    it seems i have to switch to xp again....


    thanks 4 ur support
      My Computer


 
Page 2 of 5 FirstFirst 1234 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:05.
Find Us