ATI SurroundView + Asus Motherboard + BIOS question


  1. Posts : 115
    Windows 7 x64
       #1

    ATI SurroundView + Asus Motherboard + BIOS question


    I have an onboard ATI HD 3200 graphics + an PCIe ATI HD 4350 together in SurroundView mode and everything works fine. However I don't understand the following 4 options in the BIOS. What is the difference between the setting? I have it on the first one and everything seems to work fine.

      My Computer


  2. Posts : 163
    Windows 7 Home Premium (64-bit) SP1 RTM
       #2

    It's the order in which the motherboard sets the Primary VGA graphics.
    So as you have an added 4350 connected to a monitor, this is GFX0 and is the primary card that will be used to run Games etc. Surround view turns on the onboard VGA as a secondary graphics output for a 3rd monitor as the 4350 can have 2 monitors.
      My Computer


  3. Posts : 115
    Windows 7 x64
    Thread Starter
       #3

    Rik55 said:
    It's the order in which the motherboard sets the Primary VGA graphics.
    So as you have an added 4350 connected to a monitor, this is GFX0 and is the primary card that will be used to run Games etc. Surround view turns on the onboard VGA as a secondary graphics output for a 3rd monitor as the 4350 can have 2 monitors.
    OK, so I have 3 LCD monitors in SurroundView, two of the are connected to the 4350 while the other is on the 3200. How do I enable the 4350 to be the primary video card?
      My Computer


  4. Posts : 163
    Windows 7 Home Premium (64-bit) SP1 RTM
       #4

    You have already set the 4350 as the Primary cos in the BIOS, you have it set to GFX0-GPP-IGFX-PCI. Where GFX0 is first in the list and is set as the Primary Graphics card. GFX0 stands for GraFiX0 (ie Graphics Card0), IGFX stands for Integrated GraFix (graphics), PCI stands for PCI graphics card.
      My Computer


  5. Posts : 6,879
    Win 7 Ultimate x64
       #5

    And it works quite well. This is with 2 LCD monitors on my 4850 and a 32" LCD TV on the onboard 3200,

    ATI SurroundView + Asus Motherboard + BIOS question-triplemonitor.jpg

    Also if yours is anything like mine and the option is there, make sure to set the clock frequency for the onboard to at least 400-500 MHz,

    ATI SurroundView + Asus Motherboard + BIOS question-onboardsettings1.jpg

    as well as giving it a minimum of 256 MB of ram, assuming you have at least 2 GB of system ram.

    Surround view turns on the onboard VGA as a secondary graphics output for a 3rd monitor as the 4350 can have 2 monitors.
    Up to 4 actually. Two on the video card, and any combination of DVI/VGA or VGA/HDMI on two of the three (unless the motherboard manufacturer only used two ports, most have three) on the motherboard.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:11.
Find Us