Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Thinking of getting a new gpu , some advice needed

07 May 2010   #1

Windows 7 Professional 64 bit
Thinking of getting a new gpu , some advice needed

Hi guys,

I am looking at getting a new gpu in the next couple of weeks , still not decided on exactly which one to go for , but I could do with some advice on power connectors.

The gpu I am looking at as an example is the Point Of View GTX260 896MB DDR3
Point Of View GTX260 896MB DDR3 Dual DVI Out PhysX and Cuda ready PCI-E Graphics Card - Ebuyer

Now it states in the description - "Supplemental power connector 2x PCI-E 6-pins"

So I assume it comes with these 2 cables.

Now to the bit I am unsure of so bear with me, I assume the 2 x PCI-E 6-pins connect to the back of the card itself , and at the other end of each one is female molex connector which in turn connects to the male molex coming from the psu.

Is there 1 or 2 female molex connectors on the end of each of PCI-E 6-pin?
In other words do I need 2 or 4 free male molex connectors?

And also I am having difficulty in finding out what sort of power supply this card needs.

Sorry for all the novice questions , but to date the best card I have had is only an old 8600gt and now I have a new pc I would like something a bit better but need to make sure I get the right thing.



My System SpecsSystem Spec
07 May 2010   #2

Windows 7 Professional 64 bit

Cancel the psu bit , just found it needs minimum 400 watt.

I have 500 watt.
My System SpecsSystem Spec
07 May 2010   #3

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1

The 2 x PCI-E 6-pin connectors are standard connectors on modern power supplies. You can get power supplies with 2, 4, or 6 PCI-E connectors. These connectors supply the card with three 12v circuits. Each PCI Express 6-pin connector can usually output a maximum of 75 W.

Your GTX260 will not come with any cables or adapters unless it says so in the specs. You might need to supply those separately. You can buy Molex to PCI-e adapters.

A molex connector has only one 12v circuit, so the adapter splits that into 3. This is not very efficient and there could be variations in the signal from the supply.

These high end cards are very touchy and W7 is very demanding of video. My best advice is to upgrade your power supply also. Look at a minimum 650w or better from well respected brands. There are lots of people having problems getting a stable system with cheap power supplies.

Hope that helps.
My System SpecsSystem Spec

07 May 2010   #4

Windows 7 Professional 64 bit

Nice one , thats helped alot bud.

New psu as well then I recon.


My System SpecsSystem Spec

 Thinking of getting a new gpu , some advice needed

Thread Tools

Similar help and support threads
Thread Forum
New GPU advice needed
As the title suggests I think I need a new GPU not that the old one - a Sapphire Radeon HD 5850 is not functioning - more that it is noisy and no it isn't running hot I have checked (48C on idle). So I would like to swap it out and use an Asus Expedition GeForce GTX 1050 Ti 4GB DDR5 as I also...
Graphic Cards
Problems booting my laptop. thinking of changing my HDD, need advice
Hi, I have a G51J Laptop I have a pre-installed version of windows 7 from the manufacturer. I did NOT note the windows number and the sticker wore off. I had to replace my motherboard at some point. and since then I have an non-genuine version. Recently I wanted to wipe out my OS and...
Hardware & Devices
More RAM advice needed please
Have a friend with an ASUS M5A88-M EVO Motherboard with an AMD Phenom1100T and try as I may I cannot find a brand that will fit the bill. We want to fit a 2x4GB kit - 8GB 1600MHz at a reasonable price as well. G.Skill Ripjaws X F3-12800CL8D-8GBXM
Hardware & Devices
help/advice needed
hi , i have a windows 7 packard bell laptop and i want to reinstall windows but i didnt make a backup disc , what i want to know is i have the windows 7 product key sticker under my laptop so would i be able to use a friends windows 7 disc then input my product key would this work ok ? or would...
Installation & Setup
thinking about x64. advice?
i've heard that windows 7 will come with both x86 and x64. i've always run x86, even though my processor is x64 compatible, because i only run 2gb ram, and i've always read that you really don't benefit much from x64 at that level. but since i have to do a clean install when it comes out in...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:23.
Twitter Facebook