Error code with gtx 480 on asrock k10n78m


  1. Posts : 3
    windows 7
       #1

    Error code with gtx 480 on asrock k10n78m


    Hey,

    i get an 0x000000a5 (0x0000000000001000, 0x0000000000000000, 0x00000000e0080000, 0x00000000000000ff) blue screen.

    not fully acpi complaint ... I get this 1 with the gtx 480 running windows 7.

    With the 9800 gtx on windows 7 there is no problem at all.
    I allready updated the bios but still nothing better.

    Is there an sollution for this problem?
      My Computer


  2. Posts : 163
    Windows 7 Home Premium (64-bit) SP1 RTM
       #2

    I think possibly the motherboard BIOS has loaded it's default settings. Try going into the BIOS - Advanced - ACPI Configuration - ACPI HPET Table is Enabled & Suspend to Ram is Enabled. Also in BIOS - Advanced - Chipset - make sure Primary Graphics Adapter is PCI-e and that HybridSLI is Disabled. Other things you could check is if your Hard Drive is SATA, check that the OnBoard SATA operation mode is set the same as when the Operating System was installed. ie do you run your SATA drivers in IDE mode or AHCI mode.
      My Computer


  3. Posts : 3
    windows 7
    Thread Starter
       #3

    Thanks for the reply :),

    but that wasent the problem.

    What i did ... was changing the voltage of the cpu (from auto to 2.10) and the voltage of the dram (auto to 1.25)
    Also enabled the hybridsli.
    Still i dont know if the problem came from the voltage or the hybridsli ...

    But i can play now !!!
      My Computer


  4. Posts : 3
    windows 7
    Thread Starter
       #4

    enable Hybridsli will do the work. let the voltage on auto
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:47.
Find Us