monitor recieves no signal


  1. freaky88
    Posts : 262
    MS Windows 7 Home Premium 64-bit
       New #1

    monitor recieves no signal


    everytime i boot up my monitor says no signal, so i have to set it into hibernation mode once its booted up and then turn it back to normal

    any ideas?
      My Computer
    Quote Quote

  3. Jonathan_King
    Posts : 13,354
    Windows 7 Professional x64
       New #2

    I suggest a GFX card driver update. Here is the downloads page: Drivers - Download NVIDIA Drivers
      My Computer
    Quote Quote

  4. NTFS
    Posts : 100
    Windows 7 Home Premium x86-64
       New #3

    If you are connected via HDMI, it may be HDCP, try booting, then turning the monitor on.
      My Computer
    Quote Quote

 

  Related Discussions
I have a second monitor plugged into my computer. I'm using the first one just fine, but my scond one isn't detecting anything at all. I should note that I use this:...
Monitor not getting signal.
in Hardware & Devices

Alright so it worked when I left to go pay a bill. Come back and it has no signal. I tried the PC on my TV to see if it worked and it does no problem, so I know the PC is not at fault. Tried a DVI cable and a VGA. Tried restarting and powering off everything.
No signal to monitor
in Graphic Cards

I have 2 Nvidia GTS 250s SLI together that have developed some sort of problem About half the time I boot the computer they don't send a signal to the monitor. If I unplug the connector and plug into a different port on one of the card it works fine until the next time I reboot and I have to move...
ive been trying to set up dual monitors vid primary monitor with a DVI cabel and secondery monitor with a VGA cabel but the second monitor won't get a signal and the computer wont find it.. Im using windows 7 x64 ultimate ATI radeon HD 4550 i runned dual monitors before when i had windows...
No Signal on monitor
in Graphic Cards

Using win7 home premier for 2 months no problems. Went away for 30 days, came home and booted the computer (HP s3220n). After the windows splash screen, the monitor (Westinghouse LCM-22w3) read "no signal". Booted into safe mode & uninstalled the graphic device (nvidia geforce 6150se nforce 430...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 01:19.
Find Us