Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Readyboost Not Recognizing USB 2.0 Port

26 Aug 2010   #11
nanop33

Microsoft Windows 7 Ultimate 32-bit
 
 

Size (the TMP file)

Speed taken by iPod to read/write



My System SpecsSystem Spec
.
26 Aug 2010   #12
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

The speed measurements are only meaningful for 4K blocks. Not sure what your measurements are. The min. requirement for 4K blocks is 2.5MB/sec write and 1.75MB/sec read. But that is a minimum. The access time also plays a role. If it less than the access time of the HDD, the whole exercise is counter productive. 1ms would be a safe access time.
My System SpecsSystem Spec
26 Aug 2010   #13
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Correct. Counter-productive. I wish I'd saved links to the articles indicating that Ready Boost is no boost nowadays.
My System SpecsSystem Spec
.

26 Aug 2010   #14
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

Quote   Quote: Originally Posted by karlsnooks View Post
Correct. Counter-productive. I wish I'd saved links to the articles indicating that Ready Boost is no boost nowadays.
I used it on the wife's 1MB system in 2007 with Vista. And it did help a little. But no comparison to after I upgraded to 2GBs. RAM just cannot be beat.
My System SpecsSystem Spec
26 Aug 2010   #15
nanop33

Microsoft Windows 7 Ultimate 32-bit
 
 

Bleh, I only needed to boost my memory by a bit
How much pagefile should I add to make an impact?
My System SpecsSystem Spec
27 Aug 2010   #16
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

How much is your pagefile actually used. Go to Resource Monitor > Memory tab and have a look at the little graph on th right that is called Hard Fault/sec.
My System SpecsSystem Spec
Reply

 Readyboost Not Recognizing USB 2.0 Port




Thread Tools




Similar help and support threads
Thread Forum
I port-forwarded, enabled DMZ, disabled firewall, and port is closed
So I'm not exactly sure what information I need to share to resolve this issue or know how to fix it. I've been trying to open this port (7198), and no matter what I try it just won't open. I'm not exactly sure how to explain the problem, but the title pretty much says all. If there's any...
Network & Sharing
added syba 4 port usb 3.0, win 7 not recognizing
the title pretty much says it all. when i boot into win 8 or ubuntu, it recognizes them and they work fine, no driver needed. The instructions even say that no driver is needed. Im mainly perplexed as to why it will recognize them in 8 and ubuntu, but not 7
Hardware & Devices
DVI port on monitor is stuck res of 640x480 VGA port works fine
I have dual monitors......my primary display monitor is a Chimei CMV223D My secondary display monitor is an Acer AL1916W. My graphics card is an HD ATI Radeon 5800. PROBLEM: My primary display monitor which usually has a display resolution of 1680x1050 is currently stuck on 640x480 and...
General Discussion
ReadyBoost not recognizing more than 2GB
I have a new Notebook, an LG X140, with Windows 7 Home Premium ... activated as Genuine. It only came with 512 MB of RAM so I decided to use ReadyBoost and a 4 GB USB Drive to add more RAM. I selected "Dedicate this device to ReadyBoost" which selected 3851 MB. It only actually created an extra 2...
Performance & Maintenance
Windows 7 with XP mode not recognizing USB 2.0 port.
Hello, We would like to get our Panini Vision X check scanner working in XP mode inside Windows 7. Unfortunately as I begin the installation for the check scanner in XP mode I get the error in picture #1. The error is that a USB 2.0 port is not found so the installation will not continue....
Virtualization


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:53.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App