Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No scanner detected and that a I need a WIA cable

04 Sep 2010   #1
demurin

Windows Ulitmate 32bit
 
 
No scanner detected and that a I need a WIA cable

I upgraded to Windows Ulimute 7. MY Epson pinter bombed out. I bought a HP Officejet j4580 all in one. At first the OS was not compatible. I downloaded the compatable driver and installed it. It prints like a dream now. The scanner is the problem. At first it did scan, but then it bombed out. It gives me a message of no scanner detected and that a I need a WIA cable. Where on earth to I get that cable?????? I worked ar first, now nada, nothing.

Please advice

Thank you

Demurin, ZAR


My System SpecsSystem Spec
.
04 Sep 2010   #2
bobkn

Windows 7 Pro X64 SP1
 
 

You may have a little trouble, as a "WIA cable" does not exist.

WIA drivers, yes.

I hope that better drivers exist. (TWAIN, perhaps.) The WIA drivers I've seen have had limited features.
My System SpecsSystem Spec
Reply

 No scanner detected and that a I need a WIA cable




Thread Tools




Similar help and support threads
Thread Forum
USB Device Not Recognized when replacing a USB cable for the scanner
We have this fax/copier/scanner in the office that is connected via two "spliced" USB cables (using USB extension cable.) That cable has a tendency of disconnecting when an office lady puts her bag under the desk (because of the splice.) So I decided to buy a single 10ft USB cable. This one:...
Hardware & Devices
Scanner Acer Flatbed 640U is not detected although its driver is insta
Dear Sirs 1- I have Vuego Scan Brisa640U, it was working fine under windows 7 x32. 2- Now I want to install it onWindows 7 x64 SP1 3- The driver did not work,and in compatibility mode it did not work
Hardware & Devices
Ethernet Lan Cable not detected
Ethernet Lan Cable not detected on my computer . last week it was working and now its not idk why . my friend told me to reset the bios setting so i removed the cmos and reseted the settings still not working and i also installed the latest driver for my 82579V Gigabit Network . Help pls i cant...
Network & Sharing
LAN not being detected on Cable re-connection
If i have my Ethernet cable from my Router connected to the PC before boot, the connection is detected. If i remove the cable and reconnect it anytime after windows has booted up, it isnt re-detected. I have to reboot the PC to get it detected. I have other PCs which detect the same Ethernet...
Network & Sharing
Epson V330 scanner not detected by Win 8
Hi, Just bought a new EPSON V330 Scanner. Installed as indicated, plugged it in, turned it on and...nothing. I tried everything, un-installed, re-installed, re-started, it's still not detected. Anything else I should try before I return this POS? Thank you.
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:12.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App