Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Monitor prob.

11 Sep 2010   #1
linel

Win 7
 
 
Monitor prob.

Hey guys...

I am trying to connect my laptop (dell xps1645) to my samsung 24 inch monitor (syncmaster p2450) i am trying to connect them through hdmi because my laptop doesnt have any dvi output but the problem is no matter what resolution i choose to use it wont use the whole part of the screen but when i use an anolog cable to connect to the screen it works proberly but stuck at 1600x1200 resolution and without my precious 1080p quality.

Any thought ?

Thanks


My System SpecsSystem Spec
.
11 Sep 2010   #2
neo101

WIN7 Ultimate 64bit
 
 

Setting monitor to "Wide" in Samsung menu should do it!

The setting is in "Image Size" menu!
My System SpecsSystem Spec
11 Sep 2010   #3
linel

Win 7
 
 

no wide setting available only 4:3, 16:9 and screen fit.
None works
My System SpecsSystem Spec
.

11 Sep 2010   #4
neo101

WIN7 Ultimate 64bit
 
 

I've got the T260 26" model and it just stretches to cover the few extra pixels, over 1920x1080

Surely that res should fill your screen at 24" 1:1 never looked into how these things work though.

Have you tried resetting your monitor settings completely?

You realise there are two different monitor drivers HDMI you load Samsung digi driver.

Other than that it is possible that the HDMi lead is the wrong spec??
You need HDMI 1.3c spec lead to get up and running without hassles!

Made sure samsung monitor is detected in screen res/colour setup?
Make sure you run WEI if it needs it after changing drivers.

Try screenfit again but reboot the pc!
My System SpecsSystem Spec
11 Sep 2010   #5
linel

Win 7
 
 

i did a reset just now but the problem is still there. I did install samsung monitor setup driver but it doesnt correct it either.How do i check if my cable is 1.3c spec?
My System SpecsSystem Spec
11 Sep 2010   #6
neo101

WIN7 Ultimate 64bit
 
 

Quote   Quote: Originally Posted by linel View Post
i did a reset just now but the problem is still there. I did install samsung monitor setup driver but it doesnt correct it either.How do i check if my cable is 1.3c spec?
should be stamped on the lead or printed on packaging
My System SpecsSystem Spec
11 Sep 2010   #7
linel

Win 7
 
 

cable i3660 30v 80c 28 awg thats all it says. I have scaled it through Catalyst control settings and now it takes the full screen but its blurry and looks wrong dont know how i can describe it but it looks better with the analog cable and it shouldnt be like that. I might have to try another hdmi cable :/
My System SpecsSystem Spec
11 Sep 2010   #8
neo101

WIN7 Ultimate 64bit
 
 

On the taskbar catalyst red icon
> right click > Radeon 4600 > Set desktop sizes to > HDTV

What res choice is there?

Go in the cat settings > desktop properties and set to 60hz

If you click/open HDTV does 1080p appear?

In catalyst > desktop properties - what is "current mode" saying if you can read it?

Another bloke said he fixed your problem by >
"As for not fitting the screen, I had the same thing, but needed to change the overscan settings in the ATI control panel."
My System SpecsSystem Spec
11 Sep 2010   #9
linel

Win 7
 
 

current mode is 1920x1080 60hz desktop type extended high 32bit when i click open hdtv it appears with many resolutions like 1280x720 and many more.
My System SpecsSystem Spec
11 Sep 2010   #10
neo101

WIN7 Ultimate 64bit
 
 

How about this

Uninstall the Ati driver back to basic VGA
reboot
Instal with HDMI lead plugged in and it should find all settings and HDTV/HZ monitor automatically!

Check and rerun WEi if it asks!
My System SpecsSystem Spec
Reply

 Monitor prob.




Thread Tools




Similar help and support threads
Thread Forum
1080 Monitor Prob.
I have a LC-22DC30M Sharp Aquos LED Monitor that has a native resolution of 1920x1080 according to its specifications listed below its website, unfortunately when I set my resolution into 1920x1080 it expands way over the screen so it looks like this therefore I have to set it into 1824x1026,...
Graphic Cards
Computer screen flashes at startup (not monitor prob)
My computer monitor flickers during the first 1-2 min of start-up. It will start at the Windows user-select screen and lasts into after Iíve logged in (unless I donít log in for enough time), lasting 1-2 min total. The flickers are quick, white, horizontal bars that stretch the width of my screen....
General Discussion
games resolution prob..cut off prob
when i start my games like nfs most wanted ,gta san andreas ,counter strike ,prince of persia -the sand of times....my screen is cut off from both the sides... am having out 64 bit windows 7 plz help sort this prob....i tried everthing bt nothing works..:cry::(
Gaming
Monitor refresh rate prob
My Win 7 installation causes "hide modes this monitor can't display" to not hide the modes (the option is checked, but even then it shows the higher refresh rates my monitor doesn't support). My monitor is old, and in win 7 some games try to up the refresh rate when my monitor doesn't support them!...
Graphic Cards
Multiple Monitor prob and audio prob as well
Hey All First post here, I did a search and did not find any specific answer to my problem. Firstly I am running Win 7 Ultimate with an Nvidia 8600 GT video card running HDMI through the SPDIF output to the graphics card. My problem is getting my pc to duplicate to my HDTV when I hit the...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:58.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App