New
#51
ok are your two sticks the same and how many? quote from your specs > *Memory 8GB 4x2 A-Data 1333 Mhz* is this your board
ASUS P7P55D-E PRO - motherboard - ATX - iP55 - LGA1156 Socket
ok are your two sticks the same and how many? quote from your specs > *Memory 8GB 4x2 A-Data 1333 Mhz* is this your board
ASUS P7P55D-E PRO - motherboard - ATX - iP55 - LGA1156 Socket
right, i have 2 sticks installed (the same) the other two are on RMA with newegg
so you have 4 sticks in the board memory holders?
i use this to check the modules pasmark program
http://www.passmark.com/products/rammon.htm
i posted it back in the thread
just two at the moment, in the correct channels per the mobo book for 2 dimms in dual channel operation
the other set had a bad stick, so i sent it back for replacements
edit: whats odd is that it says it has 4gb installed, but only 2gb useable... even in the resmon it says "installed 4096mb"
Last edited by DirtyElf; 01 Oct 2010 at 00:04. Reason: edit
DDR3 sticks - I'll get the link one sec
http://www.newegg.com/Product/Produc...82E16820211364
Last edited by DirtyElf; 01 Oct 2010 at 00:32. Reason: Link
How could it be bios settings if windows "sees" 4gb but says only 2 are useable?
What sort of setting would I be looking for? I've combed through the bios a few times, didn't see anything about disabling or enabling ram...?