Is this HD failing ?


  1. Posts : 93
    Windows 7 professional X 64
       #1

    Is this HD failing ?


    I've just burnt a 3 Gb movie to DVD in about 2 minutes, yet when I tried to move the same file from one hard drive to another the pop up box was quoting one hour to move the file.

    Is this HD failing ?-file-transfer.jpg

    The file transfer speed started out at about 6Mb a second, then gradually got slower and slower. In the pic it is showing 1.8 per second but it got slower than this until in the end I cancelled the transfer.

    This disk has just been formatted and it totally clean (apart from one folder "MSOCache" and one file "msdia80.dll" which I assume were put there during the format process as I never put them there).

    This drive used to be very slow and hung a lot when I had windows installed on there, so I changed my windows installation drive and formatted that one ready for storage (I've had no problems with windows since I changed the drive). I've run chkdsk and it found no problems. Are there any other apps that could test this drive.

    So should I bin this drive and replace it or could it be some other issue.
      My Computer


  2. Posts : 93
    Windows 7 professional X 64
    Thread Starter
       #2

    I have a little more info if it helps. I downloaded and ran HD tune on all of my drives (I have 3 identical HDD's, all 250Mb).

    Here are the screenshots:

    Is this HD failing ?-disk-1.pngThis is the drive I was trying to move the file to.

    Is this HD failing ?-disk-2.pngThis is my backup drive. I had problems with trying to backup my computer to this drive a week or so back. I left backup running all night and it still didn't complete.

    Is this HD failing ?-disk-3.pngThis is my C: drive.

    As you can see, my C: drive has the normal HD tune signature of a squiggly line, whereas the other two drives The ones I have had problems with are showing a different, almost straight line.

    So it looks like I could have two dodgy drives
      My Computer


  3. Posts : 93
    Windows 7 professional X 64
    Thread Starter
       #3

    Unfortunately, after running a couple more tests with HD Tune it looks like I've got two screwed disks. The problem appears to be with the write capability of the disks, as in the pics below.

    Is this HD failing ?-drive-c-read-write-2-.png
    My OS drive appears to be OK

    Is this HD failing ?-drive-d-read-write.png
    This is the drive that was quoting 1 hour to do a file transfer

    Is this HD failing ?-drive-e-read-write.png
    This is the drive that couldn't complete a 50 Gb backup when left running all night.

    So it appears as though I need to ditch two of my HDD's and replace. Or is there something else I can do to recover them. Luckily I moved all of the data off of them when I rebuilt my machine.
      My Computer


  4. Posts : 93
    Windows 7 professional X 64
    Thread Starter
       #4

    Anyone ?

    Do I have two knackered HDD's ?
      My Computer


  5. Posts : 334
    Win7 64bit Ultimate
       #5

    You could just have bad cables. Both drives doing the same thing? I would be taking a look at your cables. I had drives that were dropping out and having issues and I replaced my sata cables and sure enough those drives were fine and it was just a cable.

    Cables are cheap and it is easy to change them out to eliminate one probable cause.

    From my experience it is practically impossible to tell if a hard drive is going out based only on a software reading. Especially software not designed to test the disc integrity.
      My Computer


  6. Posts : 93
    Windows 7 professional X 64
    Thread Starter
       #6

    Tried your recommendation regarding the cables (even though the cables were brand new less than a month ago), but still have the same issues unfortunately. I'm assuming that the cables will work either way round i.e. it doesn't matter which end goes to the M/board or to the drive ?
      My Computer


  7. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #7

    Before you throw the drives away, download and run Crystal Disk Info here CrystalDiskInfo - Software - Crystal Dew World

    What do they tell you about the health status of the disks?
      My Computer


  8. Posts : 93
    Windows 7 professional X 64
    Thread Starter
       #8

    Have run the utility and it is just showing a caution on one of the disks

    Is this HD failing ?-disks2.jpg

    So I'm at a complete loss now why these two disks are performing so badly.

    Let me give you a bit of background. All 3 of the disks in my current machine came out of my old machine about a month back when I built my current PC. Both the disks that are giving me problems now had OS's on them when in my old machine (one XP and one Win 7). Both were running slow and "hanging" quite frequently (I was forever getting "application stopped responding" messages), and I always knew when Avast was downloading updates as the machine would grind to a complete halt. Also it would take about 2 hours to install a 3 Gig application. I put this down to my old machine getting old. When I built my new machine I put these 3 drives into it and installed win 7 on the spare drive and formatted the other two ready to use as storage.

    For some unknown reason, writing data to these disks takes forever, hence the poor write performance in the screenshots in a previous post.
      My Computer


  9. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #9

    OK. Well, the reason your disks are taking so long to do things/freezing etc. is because they are probably on the verge of failing, hence the yellow caution.

    The data that CrystalDiskInfo reports is the S.M.A.R.T information that is intended to measure various characteristics of the physical disk in an attempt to predict when it will fail. The Reallocated Sector Counts is one of these characteristics, and if that is flagged it usually indicates an imminent mechanical failure. You can read more about it here S.M.A.R.T. - Wikipedia, the free encyclopedia.

    I had the same happen to me with 3 WD drives. The best you can do, is backup any/all information on them as soon as possible. Buy a new disk for the OS installation if you need to. All disks eventually die, its just a matter of when. No amount of reformatting and/or re-installation can prevent that. That disk has definately tired of living - replace it ASAP.

    Regards,
    Golden
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:03.
Find Us