Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What Have I done?

25 Nov 2010   #11
Commodore Pet

Windows 7 Home Premium 64 bit SP1
 
 

I would leave it where it is, which is in line with the processor.


My System SpecsSystem Spec
.
25 Nov 2010   #12
smarteyeball

 
 

Yep. Leave that one where it is and just add another to front.


BTW, regardless of mistake - I like the ghetto mod
My System SpecsSystem Spec
25 Nov 2010   #13
thekaptone

win 7
 
 

Thanks , at least no one will nick it now it will look like rubbish LOL
My System SpecsSystem Spec
.

25 Nov 2010   #14
smarteyeball

 
 

That's the spirit
My System SpecsSystem Spec
27 Nov 2010   #15
thekaptone

win 7
 
 

just one last thing if everyone does not mind i looked at my old psu and all the pin in the 20+4 connector blocks were visible whereas like i mentioned my new one has one blamk space in the 24 ,would that be why the onboard LAN does not have any power. just a thought many many thamks for all the help
My System SpecsSystem Spec
27 Nov 2010   #16
majicninja

Windows 7 Ultimate x64
 
 

Your case fans should never blow air into your case. You want all the hot air to be blown out of your case for better cooling.

My 120mm, 80mm, 140mm PSU and Processor fans all blow air out not in. Keeping hot air in your case causes over heating....learned from trial and error and bsod.
My System SpecsSystem Spec
27 Nov 2010   #17
smarteyeball

 
 

Quote   Quote: Originally Posted by thekaptone View Post
just one last thing if everyone does not mind i looked at my old psu and all the pin in the 20+4 connector blocks were visible whereas like i mentioned my new one has one blamk space in the 24 ,would that be why the onboard LAN does not have any power. just a thought many many thamks for all the help
Would this 'blank' on your PSU correspond to the same position as this diagram (pin 20 N/C)?

What Have I done?-connector_atx_pinout.gif

If so, it's normal and unlikely to have anything to do with with the onboard LAN.

(I believe pin 20 is a largely unnecessary -5v 'standby' plug)



Silly question, but you haven't disabled the onboard LAN in the BIOS at all?


My System SpecsSystem Spec
27 Nov 2010   #18
thekaptone

win 7
 
 

i did not disable it but i will check ,did not even know you could do that
My System SpecsSystem Spec
27 Nov 2010   #19
kodi

Windows 10 Pro x64
 
 

For correct air circulation Fans on the Front and Side blow air IN and fans on the Top and Back blow air OUT
My System SpecsSystem Spec
27 Nov 2010   #20
thekaptone

win 7
 
 

Smarteyeball

in the bios it says lan enabled but lan boot rom disabled is that correct or should it be enabled
My System SpecsSystem Spec
Reply

 What Have I done?




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:54.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App