New
#11
OK. So even though it shows as being controlled by the RAID (as per image above), its really running under AHCI? If so, then its all good.
Confused......IDE and/or RAID
-
Computer Type: PC/Desktop
System Manufacturer/Model Number: Golden Mk. I.4
OS: Windows 10 Pro x64 ; Xubuntu x64
CPU: Intel i7 860 @ 2.80 GHz O/C'ed to 4.0GHz
Motherboard: Gigabyte P55A-UD3R Rev.1. Award BIOS F13
Memory: 16GB Corsair Vengance DDR3 @ 661 MHz Dual Channel (9-9-9-24)
Graphics Card: EVGA NVidia GTX 560 1024MB
Sound Card: Realtek Integrated
Monitor(s) Displays: Dual Samsung SyncMaster 2494HS
Screen Resolution: 1920*1080 and 1920*1080
Keyboard: Logitech G110
Mouse: Logitech MX518
PSU: Thermaltake ToughPower QFan 750W
Case: Thermaltake Element S VK60001W2Z
Cooling: Corsair H60 Water Cooling, 2*230mm and 2*80mm case fans
Hard Drives: 1*Samsung 840 EVO 120GB SSD; 1*OCZ Vertex 2 60GB SSD; 2*Samsung F3 SpinPoint 1TB in RAID0; 1*Samsung F1 SpinPoint 1TB; 2*Western Digital 1TB External USB 3.0 1*Western Digital 500GB External USB 3.0 1*Seagate 500GB External USB 2.0
Quote
Related Discussions
The computer has been fine for around 2 years, never an issue. About an hour ago I reboot the machine and instead of having my RAID 1 as my C drive, I now have two identical drives, the C drive and the H driveas well as an F drive.
How do I get them back to where they belong?
In the BIOS...
Hi all,
My RAID 1 (I think? I have two equal drives that are mirrored) array was causing me a lot of pain. It kept freezing up my system and having me to had to rebuild the RAID too often. After a number of tests and browsing info online, I've decided that the RAID was the culprit of the freezing...
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when...
I am running 7 pro 64bit on a ASUS p8p67 deluxe mobo and I copied all data from my 1tb storage D: drive to a backup external and proceded to install raid 5 with 3 single 1tb drives and the raid is up an running. However using Intel Rapid Storage Technology to setup the raid inside windows I had to...
I created a windows system image with the backup and restore utility built into win7. This windows install is on a single hard drive. I built and onboard RAID 0+1 array and used the windows 7 install disk to restore the image on to the new RAID volume. Windows starts to boot up but the screen goes...