Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Booting Problem

04 Jan 2011   #11
gbu

Windows 7 Ultimate x64 SP1
 
 

Ive run Western Digitals Diagnostics tests and a few other drive tests i googled for and all have come back saying he drives are fine.....................however i did make this thread a few weeks back and may shed a bit more light:-
IDE wont boot and SATA too slow

However since that thread i have wiped the 2 drives and just using the one SATA with the OS installed.

After a bit of online searching is was suggested to me that my 'Cavier Green' Drives only spin at a rate of 5400rpm compared to a 'normal' drive of 7200rpm, so your spin drive theory could be telling?

I have also got another PSU on order as a past problem with my Graphics Card showed me i only have 18Amps on the 12+ rail and maybe under powering a few items so my new one is 40Amps.


My System SpecsSystem Spec
.
04 Jan 2011   #12
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

Are your SATA drivers up to date? That's not going to fix the cold boot problem, but would be worth checking. :)
My System SpecsSystem Spec
04 Jan 2011   #13
gbu

Windows 7 Ultimate x64 SP1
 
 

I think they are but how can i tell, as i think Windows downloaded and installed them for me, i dont remember ever getting them from the WD site for example?
My System SpecsSystem Spec
.

04 Jan 2011   #14
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

You would either get them from Asus or from Intel. Are you using the Intel or the JMicron SATA from the motherboard?

This looks like your product page:

ASUSTeK Computer Inc. - Motherboards - ASUS P5QL-E

The drivers there are old - I would look for something newer, if available.

Check where the drive is connected on the motherboard and you can figure out which driver you need. Personally, I would use the Intel controller and go for the Intel drivers:

http://downloadcenter.intel.com/Default.aspx?lang=eng

EDIT: Corrected SATA options!
My System SpecsSystem Spec
04 Jan 2011   #15
gbu

Windows 7 Ultimate x64 SP1
 
 

From the intel link you gave i selected:-
Product family Storage Products
Product line Serial ATA Controllers
Product name Intel® 31244 PCI-X to Serial ATA Controller

It then says select Operating System but Windows 7 isnt listed.

So really not sure which driver i should be choosing?
My System SpecsSystem Spec
04 Jan 2011   #16
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

I hunted around but couldn't find anything newer than the release date of Win 7, so you probably have the best driver available already. It would be worth it to make sure that the drive is actually hooked to the Intel controller and not the JMicron. My housemate has an ASUS P6T with the same dual-controller options (newer hardware versions) and her machine did MUCH better off the Intel controllers than on the JMicron. :)
My System SpecsSystem Spec
05 Jan 2011   #17
niemiro

Vista Home Premium x86 SP2
 
 

Quote   Quote: Originally Posted by gbu View Post
It got to 68% then it said :-

Windows Resource Protection could not perform the requested operation.
Hello!

I haven't read the rest of this thread, you are already getting excellent help, but I shall just explain this error. SFC has encountered a big corruption above its pay rate, which it cannot fix. Logs have been created up to this point, but to analyse the actual reason for the failure, a complete analysis of the CBS.log is required. There are many, many reasons for this error. My first bit of advice would be to re-run SFC. Sometimes with a few re-runs, you can push the percentage up and up, eventually reaching 100%. If we need to, I can also look at your CBS.log.

Thanks!

Richard
My System SpecsSystem Spec
05 Jan 2011   #18
Dwarf

Windows 8.1 Pro RTM x64
 
 

Does it make any difference if you physically disconnect the other drives?
My System SpecsSystem Spec
05 Jan 2011   #19
gbu

Windows 7 Ultimate x64 SP1
 
 

@profdlp As far as i know there connected to the Intel Controller, on the MB itself there's only 6-SATA ports to connect to and the image below is from Device Manager, showing Intel.

@niemiro I'm re-running it again now and will report back if the% gets any higher.
**EDIT**
No joy im afraid, have run it several times now, and it doesnt go higher then 48%

@Dwarf I havent unplugged the other drives as yet, but will do so to check if problem is the same as when they are connected.

What i have noticed is that if i shut PC down and leave for say 5-10mins(which i just tried) it does boot up ok first time, it seems when its left for a longer period i.e overnight i get the booting trouble.


Attached Images
Booting Problem-control.jpg 
My System SpecsSystem Spec
05 Jan 2011   #20
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Quote   Quote: Originally Posted by niemiro View Post
I can also look at your CBS.log.
Hi gpu,

It maybe worth trying to find this file and attaching it here so someone could look at that.

Regards,
Golden
My System SpecsSystem Spec
Reply

 Booting Problem




Thread Tools




Similar help and support threads
Thread Forum
problem with booting my pc
Hello A few hours ago I installed a program called spyhunter. He searched for some spywares. He found a lot. But at the end I had to reboot the pc to succeed the removal of those spywares. I did it. All of a sudden, while rebooting, a blak screen appeared with some codes etc. You can see it on...
General Discussion
Booting Problem
Hello, I'am new to these forums so please forgive me for any mistakes here. Today I decided to put the HDD that was in my custom computer into my girlfriends older gateway because I have tons of games on my HDD that hers doesnt have. So I remove hers and put mine in, and I get a green screen...
General Discussion
problem with booting
I have an acer aspire 4736,3gb ddr3,intel core 2 duo laptop which i have been using for the past two years. Recently i observed that while switching on my laptop, it won't complete booting process at first attempt. It displays the booting screen but before the login screen appears(sometimes even...
General Discussion
Problem when booting
Hi, so I had xp and installed a copy of Win7 utl. Later I found out I was fooled and the key was no good. I found a way to get back to XP. Now I bought win7 Home Premium form office max and yes it's real. But now when I boot I am having problems and it is almost trying to boot into the win7 ult. Is...
Installation & Setup
Problem booting up...
I am having a problem. My computer was working perfectly. But yesterday I was moving around with my computer and I think I accidently did something and the screen went blank. I tried to reboot the PC but it does nothing. It turns on but does not boot up and nothing shows up on the screen. I...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 08:26.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App