HDD Raid 0 to SSD help


  1. RyDawg0014
    Posts : 8
    Windows 7 Home Premium 64bit
       New #1

    HDD Raid 0 to SSD help


    Edit: New to forums! I am going to post in installation & setup since i think that is more appropriate.

    Hey guys! Happy new year!

    I was wondering what would be the best way to setup my new SSD?

    Ive never had to swap from big to small so im looking for a little help to point me in the right direction. Currently im using 1tb raid 0 HDD and decided to upgrade to a Samsung 128gb SSD. I know that the easiest way to go about this would be to create a system image, do a clean install of W7 on my SSD, and to restore the image to my new SSD but i cannot seem to shrink my image or my C: partition under 250gb or so.

    Any tips or things i should delete so that i can make my partition or image smaller for my new SSD?

    Ive looked everywhere online and cant seem to figure this out lol.

    Any help is greatly appreciated!

    Thank you

    -Ryan
    Last edited by RyDawg0014; 05 Jan 2011 at 22:10.
      My Computer
    Quote Quote

  3. BugMeister
    Posts : 3,822
    Windows10 Pro - 64Bit vs.10547
       New #2

    are you saying that you don't have Windows7 on an installation disk..?

    ie. that the machine came with Windows7 pre-installed..??
      My Computer
    Quote Quote

  4. RyDawg0014
    Posts : 8
    Windows 7 Home Premium 64bit
    Thread Starter
       New #3

    BugMeister said:
    are you saying that you don't have Windows7 on an installation disk..?

    ie. that the machine came with Windows7 pre-installed..??
    i have my installation disk to load W7 onto my SSD but as far as putting all my old settings onto it, thats where i need the help.
      My Computer
    Quote Quote

 

  Related Discussions
The computer has been fine for around 2 years, never an issue. About an hour ago I reboot the machine and instead of having my RAID 1 as my C drive, I now have two identical drives, the C drive and the H driveas well as an F drive. How do I get them back to where they belong? In the BIOS...
Hi all, My RAID 1 (I think? I have two equal drives that are mirrored) array was causing me a lot of pain. It kept freezing up my system and having me to had to rebuild the RAID too often. After a number of tests and browsing info online, I've decided that the RAID was the culprit of the freezing...
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when...
I am running 7 pro 64bit on a ASUS p8p67 deluxe mobo and I copied all data from my 1tb storage D: drive to a backup external and proceded to install raid 5 with 3 single 1tb drives and the raid is up an running. However using Intel Rapid Storage Technology to setup the raid inside windows I had to...
I created a windows system image with the backup and restore utility built into win7. This windows install is on a single hard drive. I built and onboard RAID 0+1 array and used the windows 7 install disk to restore the image on to the new RAID volume. Windows starts to boot up but the screen goes...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 16:22.
Find Us