PC won't boot with 8gb RAM installed

Page 1 of 2 12 LastLast

  1. Posts : 7
    Windows 7 64 bit
       #1

    PC won't boot with 8gb RAM installed


    Hi, please bear with me here as I try to explain this the best I can...

    I've recently built a PC (specs are linked to my profile but if you want I can post them here for ease) which works brilliantly except for the fact that for some reason it won't go past the very first boot up screen when 8gb of memory is installed. When it attempts to check the memory with 8gb installed it merely shows 4gb and then restarts before it gets to checking the HDD's but then just shows a blank screen until I manually turn it off then back on again.

    The confusing thing is I used to use 8gb on my previous setup, so I know most of my hardware will work with it, including my OS. However, due to some pins being damaged I had to replace my previous motherboard with the Gigabyte I have now. I've checked it out and the motherboard I'm using is supposedly fully capable of taking 8gb of DDR2 RAM running at 800Mhz, which is what I'm trying to use. I have 4 sticks of 2Gb RAM (4Gb Corsair and 4Gb A-Data Extreme Edition) and have checked that all slots and sticks are working, and they are. I can boot up with 4Gb using any combination of the 4 slots and sticks. This leads me to believe that it's a motherboard issue. However, since the MB is working fine otherwise I am reluctant to replace it. The BIOS version I'm using is the latest one for that MB.

    After reading several other posts across the internets from people with a similar issue, I tried resetting the CMOS to no avail. I then tried increasing the memory's voltage from 1.8v to 2.0v (I can't seem to go in 0.5v stages like most people, that's the lowest increase I can do) in the BIOS but nothing changed. The BIOS states the timings as 5-5-5-18 for all of the sticks so it's not that.

    The only things I haven't tried yet are booting with 6gb (I want 8, not 6 ) and reinstalling Windows 7 64 bit. As I had to replace my MB I had to reinstall Windows, but kept all my old data in the Windows.Old file. I cut/pasted everything I could into the current Windows, Program Files folders etc in order to save time and then deleted the folders and files that refused to transfer. Is it therefore possible that there is a driver or file conflict somewhere that is preventing my PC from booting up with 8gb with my current setup?

    I am not completely averse to reinstalling Windows but as it will be this HD's 4th reinstall of it if I can avoid it that would be great. Although if you think there's a good chance it will solve the problem then I guess it's worth it

    Also, is there a chance the 4Gb of A-Data Extreme Edition RAM I'm trying to use is causing this problem? I made sure it was the same as my Corsair sticks in specs but bought it simply because it was cheap on Amazon, not because it was the 'extreme edition'. Does that mean it's likely to have been overclocked in some way and would that cause this problem? The PC boots up and runs fine when it's installed on its own though I used to have another 4gb in Corsair sticks identical to the ones I'm using now but they got damaged, but before that happened all the Corsair sticks worked fine together as 8gb.

    Sorry about the messy explanation but any help you can provide would be greatly appreciated.

    Thanks,

    Greg
      My Computer


  2. Posts : 1,035
    Vista 64 Ultimate, Windows 7 64 Ultimate, Ubuntu 9.10
       #2

    A fast and simple solution would be to configure your new build with 4Gb RAM only and see if this allows you to boot, if it does/does not, swap the existing RAM with the other 4Gb and run it again. Quick guess is you may have some bad RAM but unless you are willing to perform these test you'll be frustrated trying with the 8Gb for the moment. The alternative would be to place the slower RAM in the first slot then the faster since BIOS will adjust to the slower speed I'm just fearful that you may have a mobo issue so checking to see if all the screws are installed and tightened properly and that the board is not touching anywhere it should not be.
      My Computer


  3. Posts : 7
    Windows 7 64 bit
    Thread Starter
       #3

    fishnbanjo said:
    A fast and simple solution would be to configure your new build with 4Gb RAM only and see if this allows you to boot, if it does/does not, swap the existing RAM with the other 4Gb and run it again. Quick guess is you may have some bad RAM but unless you are willing to perform these test you'll be frustrated trying with the 8Gb for the moment.
    As stated, I've already tried this. I've been using 4gb and it's been fine except I've experienced 8gb and want it back. It's not the end of the world but 8gb is noticeably better than 4gb.
      My Computer


  4. Posts : 7
    Windows 7 64 bit
    Thread Starter
       #4

    Just to clarify...

    xeroxicide said:
    I have 4 sticks of 2Gb RAM (4Gb Corsair and 4Gb A-Data Extreme Edition) and have checked that all slots and sticks are working, and they are. I can boot up with 4Gb using any combination of the 4 slots and sticks.
      My Computer


  5. Posts : 1,035
    Vista 64 Ultimate, Windows 7 64 Ultimate, Ubuntu 9.10
       #5

    Is either RAM faster? Again, the slower RAM must be first for the BIOS to set clocking correctly either on their own would set the correct clock but faster RAM first can be a problem. My simple guess would be to sell the 4Gb of A-Data or the Corsair and purchase identical second 4Gb RAM.
      My Computer


  6. Posts : 6,292
    Windows 7 64 Bit Home Premium SP1
       #6

    It sounds like mismatched RAM or bad RAM sticks.
    Have you run Memtest86+ on the RAM? You can run a test on each stick in the first slot to test each stick individually, then run a test with more slots populated.

    I was going to jump right to a defective motherboard, but now you say you ran 8GB previously, so I'm leaning more towards mismatched RAM.

    FYI: if the system freezes during BOOT before the hard drives are found then the OS has not been loaded and cannot be a cause of the problem.
      My Computer


  7. Posts : 7
    Windows 7 64 bit
    Thread Starter
       #7

    fishnbanjo said:
    The alternative would be to place the slower RAM in the first slot then the faster since BIOS will adjust to the slower speed I'm just fearful that you may have a mobo issue so checking to see if all the screws are installed and tightened properly and that the board is not touching anywhere it should not be.
    That's weird, did you edit your first post? Cos I didn't see this when I originally replied to it.

    And faster how? They are all specified as 800Mhz.

    Sorry, forgot to add that my MB is not currently screwed in, as when I did try screwing it in it shorted out against the case. But that didn't cause the problem because the problem existed before I tried screwing it in.
      My Computer


  8. Posts : 7
    Windows 7 64 bit
    Thread Starter
       #8

    TVeblen said:
    It sounds like mismatched RAM or bad RAM sticks.
    Have you run Memtest86+ on the RAM? You can run a test on each stick in the first slot to test each stick individually, then run a test with more slots populated.
    I haven't run Memtest but will try that later, thanks.

    TVeblen said:
    I was going to jump right to a defective motherboard, but now you say you ran 8GB previously, so I'm leaning more towards mismatched RAM.
    Maybe I didn't make it clear in my original post but when I said I've run 8gb before with most of my current hardware I meant that was with a different MB.

    TVeblen said:
    FYI: if the system freezes during BOOT before the hard drives are found then the OS has not been loaded and cannot be a cause of the problem.
    Yeah, I figured as much it's just I've exhausted most of my options.
      My Computer


  9. Posts : 9,606
    Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
       #9

    One of the biggest problems with memory in win7 is mis-matched brands & speeds.
      My Computer


  10. Posts : 7
    Windows 7 64 bit
    Thread Starter
       #10

    DocBrown said:
    One of the biggest problems with memory in win7 is mis-matched brands & speeds.
    ...Really? That's annoying. So basically what you guys are saying is I need to match up exactly the brand and model of all my sticks? That would explain why it worked before when I had matching sticks and not now when I don't...
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:17.
Find Us