Does anyone think these temps are off?


  1. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #1

    Does anyone think these temps are off?


    Hi all i am posting a new OC with a new cpu i currently installed a 965 BE oc'ed to 4.1 ghz are these temps correct because cpuz can't detect them this also happened with my previous cpu 2.8 925 deneb but temps were really low with that one too round 16 to 14 c

    I also have a hyper 101 heatsink dual fan push/pull
    i also used artic silver formula 5 the OC seems to be stable but i might push it back after i run some test anyway it seems to oc better then my previous 2.8 925 deneb so if anyone has some thoughts please share


    also failed to mentioned i installed a new psu 700 watt cooler master extreme
    Attached Thumbnails Attached Thumbnails Does anyone think these temps are off?-temps.png  
      My Computer


  2. Posts : 4,280
    Windows 7 ultimate 64 bit / XP Home sp3
       #2

    If they are right I'd say sweet. Have you tried maybe another program like core temp? Download Core Temp
    Fabe
      My Computer


  3. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
    Thread Starter
       #3

    actually core temp is one of them already on the post cpuz cpu hw monitor core temp and my hw monitor from the Mobo

    also do you have the 10.12 hotfix or anyone for that matter I know you are a Nvidia guy Fabe

    also my temps dropped when i installed 10.12 look at the gpu pic from before look how much the temps drop
    Attached Thumbnails Attached Thumbnails Does anyone think these temps are off?-gpu-temp-drop.png  
      My Computer


  4. Posts : 4,280
    Windows 7 ultimate 64 bit / XP Home sp3
       #4

    Well that's it I'm offically blind. Sorry about that. Well if that's core temp it's not reading right it should show all 4 cores and I don't see any temps for them like on mine. Would you mind snipping it. Would make it easier to read. Thanks. Fabe

    Does anyone think these temps are off?-temps.png
      My Computer


  5. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
    Thread Starter
       #5

    lol don't beat yourself up yet hahaha just a small oversight but it seems to be doing the job so far i was actually going for the 970 BE but i mean 100mhz really ? no point in that and this was 40 dollars cheaper
      My Computer


  6. Posts : 4,280
    Windows 7 ultimate 64 bit / XP Home sp3
       #6

    Solarstarshines said:
    lol don't beat yourself up yet hahaha just a small oversight but it seems to be doing the job so far i was actually going for the 970 BE but i mean 100mhz really ? no point in that and this was 40 dollars cheaper
    Well Okydoky then you had me finding my magnifying glass and cleaning it. Wouldn't be so bad if i wasn't blind in one eye and couldn't see out of the other.
    Fabe
      My Computer


  7. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       #7

    You must live in the arctic or your hyper 101 does a terrific job. In my house, the room temps are higher.
      My Computer


  8. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
    Thread Starter
       #8

    here ya go same thing no temps
    Attached Thumbnails Attached Thumbnails Does anyone think these temps are off?-core-temp.png  
      My Computer


  9. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
    Thread Starter
       #9

    well it is almost like artic here i live by the beach and my room is on the bottom floor of a hill and my room is pretty huge and with a double glass door so yes very cold
      My Computer


  10. Posts : 6,879
    Win 7 Ultimate x64
       #10

    You have the latest bios installed on the motherboard? If so have a good look through the "T-Series" menu for anything to do with ACC (automatic clock control),

    SB750 and Advanced Clock Calibration unlocks higher Phenom frequencies - www.nordichardware.com

    which is supported on all 785G/710 based motherboards as long as the option is present, and from looking at the bios update page for your board Biostar added it in the 88GCO517 bios,

    BIOSTAR :: TA785GE 128M :: BIOS

    When used to successfully unlock cores on x2 and x3 CPU's it "breaks" the core temperature readings and they all read 0° just like yours is. If you find it and it is enabled, set it to disabled and you should get the core temps back.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:58.
Find Us