Hard Drives


  1. Llibstar
    Posts : 3
    Windows 7 Pro 64-bit
       New #1

    Hard Drives


    I hope this isn't a 'stupid' question, but what is the difference between Sata & e-sata?
      My Computer
    Quote Quote

  3. DocBrown
    Posts : 9,606
    Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
       New #2

    Sata hook up internally & e-Sata hook up with a different external connector.
      My Computer
    Quote Quote

  4. Llibstar
    Posts : 3
    Windows 7 Pro 64-bit
    Thread Starter
       New #3

    Again Hard Drive


    Thankyou. But my problem is installing a west/dig 1.0TB sata into a Raygo R12-40924 eXtreme encloser 3.5 SATA to USB 2.0. With win7 pro 64-bit, it shows "new device succesfully installed', but dosen't show up in mycomp or anything else. Since they are both new, i suppode one of them could be bad.
      My Computer
    Quote Quote

  6. ignatzatsonic
    Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       New #4

    Go to Disk Management in Windows and see if it appears. If it does not have a drive letter, assign one to it in Disk Management.
      My Computer
    Quote Quote

  7. Llibstar
    Posts : 3
    Windows 7 Pro 64-bit
    Thread Starter
       New #5

    Hard Drive


    Thanks. That did the trick. I really appreaciate your help. Since I'm new to this forum, I'll be using it quite a bit in the future. Again, Thank You!
      My Computer
    Quote Quote

 

  Related Discussions
At start up I am getting the blue screen which says "remove any newly installed hard drives or hard drive controllers" I did take out the hard drive and connected it to another computer using a sata to usb cable, but the drive was not recognized so I put the hard drive back. Now when I am...
I have a new computer plus a couple of other computers and I have some external hard drives and flash drives. what is the best way to check these devices to make sure they are clean, will just connecting them and viewing them or running AV and other security checks propose a risk to the computer...
I set up a new computer. Windows 7 Pro 64x Everything was fine but then I connected a flash drive to it and I get: Location Not Available H:\ is not accessible. Access is denied If I go into the properties to the “security” tab, it says “you do not have permission to view or edit this...
I have windows 7 pro and recently I have not been able to open up a new folder on any external hard drive or flash drive that I use with my computer. When I use these same flash and external hard drives in another computer it works fine, my initial thought is, there is something disabled in my...
While looking into another possible problem with a hard drive on my system,I began unplugging the devices (there are four of them) to isolate the problem and in doing so, I I seriously corrupted C drive, and began getting 0x7b BSOD messages. First I tried to do a System Repair with the Repair...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 03:25.
Find Us