Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Greyed out 'Use P-state transitions (PST)' in RMclock

04 Feb 2011   #11
Bill2

Windows 7 x64 pro/ Windows 7 x86 Pro/ XP SP3 x86
 
 

Yes there used to be notebooks with P4 (not mobile) processers. These were generally large "desktop replacement" notebooks. I myself had one such Toshiba satellite series and using it was a nightmare because it heated up like crazy. Whenever I had to do something CPU intensive on it, I would raise it a bit and aim a fan at its backside.


My System SpecsSystem Spec
.
04 Feb 2011   #12
SlasherIT

Ubuntu 12.10
 
 

Hi,

Hmmmm, the notebook I am talking about is a HP zd7060ea, and it is a large desktop replacement notebook, does that mean I won't be able to undervolt?

Slasher
My System SpecsSystem Spec
04 Feb 2011   #13
Bill2

Windows 7 x64 pro/ Windows 7 x86 Pro/ XP SP3 x86
 
 

Ok listen the only thing I can think of now is- try older versions of rmclock. Google for them.
My System SpecsSystem Spec
.

04 Feb 2011   #14
SlasherIT

Ubuntu 12.10
 
 

Hi,

Hmmm ok thanks.

Slasher
My System SpecsSystem Spec
04 Feb 2011   #15
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by SlasherIT View Post
Hi,

Hmmm ok thanks.

Slasher
Might your be unsupported....see NOTE:





Quote:
Current release of RMClock utility implements the CPU frequency, CPU load and throttling level determination on the following processor models:
  • AMD K7 (Athlon/XP/MP, Duron, Sempron) and K8 (Athlon 64/FX/X2, Opteron, Dual-Core Opteron, Sempron, Turion 64/X2) family processors.
  • Intel Pentium II/Celeron, Pentium III/Celeron, Pentium M/Celeron M, Pentium 4/Celeron (Northwood and Prescott cores), Pentium 4 Extreme Edition (Gallatin and Prescott cores), Xeon (Prestonia, Nocona, Cranford, Irwindale, Potomac, Paxville and Dempsey cores), Pentium D and Pentium Extreme Edition (Smithfield, Presler and Cedar Mill cores), Core Solo/Celeron M/Core Duo (Yonah core) and Core 2 Duo/Core 2 Quad/Core 2 Extreme/Xeon (Conroe/Allendale, Merom, Woodcrest, Kentsfield/Clovertown cores). "
Dynamic P-state transitions are supported on:
  • AMD Athlon 64/FX/X2, Sempron, Turion 64/X2, mobile Athlon 64, Opteron and Dual-Core Opteron featuring AMD Cool`n'Quiet(tm) technology.
  • Mobile or Low-Power Desktop AMD Athlon XP featuring AMD PowerNow!(tm) technology.
  • Intel Pentium M, Intel Core Solo and Core Duo, Intel Core 2 Duo, Core 2 Quad and Core 2 Extreme, Intel Xeon (Woodcrest and Clovertown cores) featuring Enhanced Intel(R) SpeedStep(tm) technology (EIST).
  • Intel Pentium 4 600 series (Prescott N0 core), Intel Xeon (Nocona, Cranford, Irwindale, Potomac, Paxville and Dempsey cores), Intel Pentium D 800/900 series (Presler core), Intel Pentium Extreme Edition (Smithfield, Presler and Cedar Mill cores) featuring Enhanced Intel(R) SpeedStep(tm) technology (also known as Demand-Based Switching).
NOTE: Intel(R) SpeedStep(tm) technology and the "old" vision of Enhanced Intel(R) SpeedStep(tm) technology found in mobile Pentium III-M and mobile Pentium 4 processors are not supported.




Dynamic on-demand clock modulation adjustment is supported on:
  • Intel Pentium M/Celeron M, Intel Pentium 4/Pentium 4 Extreme Edition/Celeron, Intel Xeon, Intel Pentium D/Pentium Extreme Edition, Intel Core Solo/Core Duo, Intel Core 2 Duo/Quad/Extreme featuring On-Demand Clock Modulation (ODCM).
RMClock utility will run on unsupported CPU models, however, in this case, most of its functionality will not be available.
My System SpecsSystem Spec
04 Feb 2011   #16
SlasherIT

Ubuntu 12.10
 
 

Hi,

So if I have a Northwood P4 which I think I do, then Dynamic P-State won't work right?

Do you know any alternatives to RMClock to undervolt my processor?

Slasher
My System SpecsSystem Spec
04 Feb 2011   #17
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by SlasherIT View Post
Hi,

So if I have a Northwood P4 which I think I do, then Dynamic P-State won't work right?

Do you know any alternatives to RMClock to undervolt my processor?

Slasher
Have look here, might helps you a little:
Undervolting a Northwood - [H]ard|Forum
My System SpecsSystem Spec
04 Feb 2011   #18
SlasherIT

Ubuntu 12.10
 
 

Hi,

Thanks for the link, but it didn't help at all. Sorry. What next?

Slasher
My System SpecsSystem Spec
04 Feb 2011   #19
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by SlasherIT View Post
Hi,

Thanks for the link, but it didn't help at all. Sorry. What next?

Slasher
That's mean you won't be able to undervolt...you need a cooler!
My System SpecsSystem Spec
Reply

 Greyed out 'Use P-state transitions (PST)' in RMclock




Thread Tools




Similar help and support threads
Thread Forum
Tag heuer eyeframe,Crizal,Transitions lens user!!
Guys,planning to buy two Tag heuer frames but i confusehttp://www.generalnonsense.net/images/smilies/confused.gifhttp://www.generalnonsense.net/images/smilies/confused.gif that r they really worth of it?Why they r so much costly?only for Brand name and warranty? Do u ever use crizal sapphire uv...
Chillout Room
Desktop Slideshow transitions WITHOUT Aero; how?
I find it daunting that after a lot of searching, I need to turn on Aero to have the simple fade effect for my desktop wallpaper slideshow. Hasn't there been anyone who tried to activate the desktop slideshow transitions WITHOUT Aero?
Customization
Wallpaper Slideshow Transitions
When I first had my computer, the wallpaper/desktop slideshows transitioned between pictures smoothly. Further on down the road, there is no transition effect, just a direct cut-to. I have a feeling TuneUp Utilities is to blame, but I can't find a setting that relates to the wallpaper slideshow...
Customization
W7 HB Transparency and Transitions
Okay, So I was recently able to put transparency on my Home Basic Win 7. Now I'm asking if it's possible to add Windows 7 Ultimate Application transitions. Meaning everytime I close a program it fades away in a second and the same opening a program instead fading in. Is it possible? Let me know...
Themes and Styles
Installing RMClock Utility (W7 7232)
Hey, I have another computer I'm working on here (not the one in my listed system specs) that is having a slight heat problem. It has more than enough power for what it does, so I'm looking to underclock/undervolt the processor by a small amount. Unfortunately, the system's BIOS does not allow...
Software
2010 Powerpoint Transitions
So i just made a PowerPoint using Office 2010 beta, and when I tried showing my friend who is running Office 2007, he doesn't see any of my transitions. What's up with that?
Microsoft Office


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:32.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App